Search results for: 'view'

The Inno Instrument HDMI to USB Cable is a communication interface designed for Inno Instrument VIEW series fusion splicers, including VIEW 3, VIEW 5, VIEW 7, and VIEW 12R models. It connects the splicer’s Micro HDMI port to a standard USB Type-A port on a computer for data transfer, software updates, and graphical interface mirroring.

The INNO Instrument LI-ION 225 is a lithium-ion replacement battery designed for use with the INNO Instrument View600 Optical Time Domain Reflectometer (OTDR). This battery provides portable power for field testing environments where the View600 OTDR is deployed for fiber optic network verification and troubleshooting.

The INNO Instrument LI-ION 220 is a 7,800mAh rechargeable lithium-ion battery designed for the INNO Instrument View 500 Optical Time Domain Reflectometer (OTDR). It provides portable field power for fiber optic testing operations and supports extended operation of the View 500 platform during installation.

The INNO Instrument LBT-30 is a 9000mAh lithium-ion rechargeable battery pack designed for INNO View series fusion splicers. Rated at 11.1V, it supports extended field operation and is compatible with View 7, 8+, 8 Pro, 8X, 12R, 12R Pro, IFS-10, and VIEW12R MAX models.

The INNO Instrument CJ-11 is a vehicle power cable designed to operate and charge compatible INNO fiber fusion splicers from a standard 12V car cigarette lighter socket. It supports 9V–14V DC vehicle input and is compatible with select View and IFS series splicers and LBT battery packs.

The INNO Instrument USB-7P is a proprietary USB Type-C to DC power and data cable designed for use with INNO View 12R and View 12R PRO ribbon fusion splicers. It provides a dedicated interface for DC power delivery and device communication specifically configured for INNO splicer architecture not intended for use with non-INNO devices.

The INNO Instrument LBT-52 is an 11.1V, 5200mAh (57.72Wh) rechargeable lithium-ion battery pack designed for INNO fusion splicers. It features an integrated LED battery level indicator for real-time capacity monitoring and supports approximately 3-hour charging.

The INNO USB Type-C to USB Type-A (Female) Cable is an OTG adapter designed for INNO View-series fusion splicers equipped with a USB-C interface. It enables connection of standard USB-A peripherals such as flash drives, mice, or keyboards for data transfer and accessory operation.

The INNO Instrument ACC-25-B Power Cable provides AC input connection for INNO Instrument devices that use the JS-180300 AC charging adapter. The cable connects the adapter block to a standard AC wall outlet and is used with compatible INNO Instrument OTDRs and fusion splicers.

Fluke LENS/WIDE2 wide angle infrared lens expands field of view to 46° x 34°, enabling easier thermal inspections in tight spaces with compatible cameras.

Fluke FVF-BASIC software enables meter-to-PC data transfer and quick table or graph reports from supported Fluke instruments.

The INNO Instrument JS-1618 AC Adapter is a 12.6V DC power supply engineered for the View 1, M7, M9, and A3 fusion splicers. It supports direct instrument operation and charging of compatible internal battery packs. The adapter accepts 100–240V AC input for global deployment and provides regulated 12.6V DC output at 1.8A.

The INNO Instrument ACC-25-B AC Power Cable is a standard AC input cord designed to connect compatible INNO Instrument AC adapter blocks to a wall outlet. Featuring a 2-pin wall plug and C7 “Figure-8” connector, it supports 100–240V AC operation when used with approved adapters such as the JS-1618 and JS-180300 for View and M series fusion splicers.

Fluke telephoto lens magnifies infrared images 2x for safer inspections, capturing critical details without entering hazardous zones.

The INNO Instrument DIN-18 is a DC power cable designed to connect compatible INNO TS-Pro or TS-Plus thermal strippers to the power output port of supported INNO View series fusion splicers. It enables field operation by allowing the thermal stripper to draw power directly from the splicer’s internal battery.

INNO Instrument PAL-1002 safety BNC-to-BNC cable for connecting current sensors and measurement signals with compatible INNO power analyzers and digital power meters.

Fluke LENS/4XTELE2 4X Telephoto IR Smart Lens magnifies distant targets for safer thermal inspections without recalibration on compatible Fluke cameras.

Endress+Hauser TG051F34 plug-in LCD display for iTEMP transmitters, providing local measurement readout, diagnostics, and easy on-site monitoring.

Fluke Networks FI1000-LC-PCTIP probe tip enables clear LC patch cord inspection with precise video alignment for reliable fiber connector evaluation.

Fluke HH290 hook provides a secure way to hang ScopeMeter 190-Series II, 43x Power Quality Analyzers, and MDA-5xx Motor Analyzers for hands-free operation.

The INNO Instrument JS-180300 is a 19V AC adapter and battery charger designed for INNO View series fusion splicers and compatible instruments. It provides 19V DC output at 3.42A with universal 100–240V AC input, supporting global mains standards. Desktop-style construction with attached DC output cable.

Fluke 050-CLKT infrared window enables safe thermal inspections through live panels, featuring a 2-inch arc-resistant CLIRVU crystal and Kwik Twist cover.

Fluke Ti Visor 3 reduces glare and reflections on thermal imagers indoors or outdoors, ensuring clear viewing in bright sunlight.

Fluke Networks FI1000-ADAPT-60 adapter adds a 60° angled camera tip for improved inspection access. Ideal for technicians working with tight or hard-to-reach fiber ports.

Fluke Networks S2 GUIDE SN FEMALE enables accurate inspection of recessed female SN connectors using FI-3000 or FI-1000 inspection cameras.