Search results for: 'with aad'

Gould Shawmut A70P100-4 semiconductor fuse delivers 100A protection with 700VAC and 650VDC ratings, designed for high-speed circuit protection in power electronics and semiconductor applications.

The Fluke TP88 Rigid Back Probe Pin Set includes two fine-tip, rigid back probe pins designed for use with 2 mm test probes. The red and black insulated pins slide onto compatible probes and allow access between weather pack seals and wires. Tested to 60 V DC.

AEMC MH60 AC DC Current Probe: Portable 100A current probe with BNC output, 1MHz bandwidth, rechargeable battery, perfect for any oscilloscope.

Fluke FEV100/TY1 & TSL kit tests Type 1 and Tesla AC EV chargers with EV simulation, GFCI checks, grounding pre-tests, and full EVSE safety verification.

AEMC MN72 Current Probe designed for Model 6424, enables accurate ground & bond testing with one-button operation, CAT IV 600V safety, and IP65 rating.

AEMC E94 AC/DC Current Probe: Compact, Hall-effect design with 100A range, zero DC reset, and auto recognition for PowerPad 8345 & PEL loggers.

Compact AEMC MN379 AC Current Probe with 5A & 100A ranges, 200mV/A & 10mV/A outputs, 10 ft lead, BNC connector, and 40 Hz–10 kHz frequency response.

The Bussmann DFJ-90 is a 90 A Class J high-speed, current-limiting drive fuse designed for protection of AC and DC drives and power semiconductor equipment. Rated 600 Vac and 450 Vdc, it provides high interrupting capacity and low let-through energy in branch circuits.

AEMC AmpFlex Rogowski coil sensor with 24" flexible loop. Measures 300A and 3000A AC with dual 10mV/A and 1mV/A outputs. Ideal for tight spaces and irregular conductor shapes.

AEMC AmpFlex Rogowski coil current sensor with 24" flexible loop. Measures 30A and 300A AC with dual 100mV/A and 10mV/A output for use with DMMs, loggers, and scopes in compact spaces.

Brady WML-311-292 labels offer durable, self-laminating wire ID for 10–6 AWG wires, using B-292 vinyl for clear, long-lasting identification with Brady printers.

Cooper Bussmann MV055F1DAX100E is a 5.5kV full-range medium voltage fuse rated at 100A with 50 kA RMS symmetrical interrupting capacity for feeder circuit, switchgear, and transformer protection.

Square D 9998RA81 contact kit restores Size 0 Type B/BH/R contactors with OEM replacement contacts for reliable repair and long-lasting performance.

AEMC AmpFlex Rogowski coil sensor, 24" flexible design, measures AC current up to 1000A with 1mV/A output—ideal for tight, irregular spaces.

AEMC AmpFlex Rogowski coil current sensor with a 36" flexible loop. Measures 100A and 1000A AC with dual 10mV/A and 1mV/A output. Ideal for tight, irregular spaces and large bus bars.

AEMC AmpFlex® Rogowski coil sensor, 36" flexible design for tight spots. Measures up to 3000A AC with 1mV/A output—ideal for irregular conductor shapes.

AEMC AmpFlex flexible Rogowski coil sensor, 36" length, measures AC current up to 3000A with 10mV/1mV per amp output for tight spaces.

AEMC AmpFlex Rogowski coil sensor, 24" flexible design, handles up to 3000A AC with 1mV/A output—perfect for tight and irregular conductor spaces.

Compact AEMC MN379T AC Current Probe with True RMS, 5A & 100A ranges, 200mV/A & 10mV/A outputs, 10 ft BNC lead, 40 Hz–10 kHz frequency response.

Panduit PCSB2/0-4 delivers dependable splicing with a clear PVC 4-port design, wide 2/0–14 AWG compatibility, and corrosion-resistant multi-tap performance.

Endress+Hauser TG051F34 plug-in LCD display for iTEMP transmitters, providing local measurement readout, diagnostics, and easy on-site monitoring.

Rohde & Schwarz FSH-Z1 true RMS terminating RF power sensor for 10 MHz–8 GHz measurements, providing accurate average power analysis and direct compatibility with FSH series handheld spectrum analyzers.

Fluke Networks MT-8203-22 Test Leads: Durable alligator clips with vinyl sleeves for reliable connectivity in network testing applications.