Search results for: 'and isaiah'

The Harold Beck & Sons 11-1373-01 is a 7 Amp fast-acting fuse used for overcurrent protection in Digital Control Module (DCM) circuits. Designed for use within Beck electric actuator systems, this listing includes a quantity of five identical fuses.

Pomona 4555-2 is a Do-It-Yourself Minigrabber test clip designed for hands-free electrical testing. Accepts wire up to 0.144 in diameter and 0.025 in square pins. Rated to 5 A and 300 Vrms for hands-free use. Supplied as a package of ten red test clips.

The Bussmann DFJ-90 is a 90 A Class J high-speed, current-limiting drive fuse designed for protection of AC and DC drives and power semiconductor equipment. Rated 600 Vac and 450 Vdc, it provides high interrupting capacity and low let-through energy in branch circuits.

Pomona 6733-2 is a 50 ft red silicone insulated test lead wire designed for fabricating custom test leads, jumpers, or patch cords. It uses 18 AWG bare copper conductors with a high strand count for flexibility and is the same wire used in Pomona test leads and patch cords.

The Littelfuse L70S040 is a 40 A, 700 V high-speed semiconductor fuse designed for current-limiting protection of sensitive power electronics. It features a round melamine body with silver-plated copper terminals and is rated for both AC and DC systems.

AEMC 2135.75 replacement connection lead keeps compatible AEMC 6472 and 6474 electrical test setups ready with a direct-fit connection accessory.

Mersen A155F1D0R0-65E is a 15.5kV, 65E ferrule-mounted Amp-Trap CS-3 medium voltage fuse for transformer and distribution line protection. It is an E-rated, current-limiting, non-venting fuse with visual blown-fuse indication. 

The Pomona 2708 Test Lead Holder is designed to organize and support wires up to 0.450 inch (11.43 mm) in diameter. It accepts RG 213 and RG 214 cable types and provides a structured method for managing test lead routing. Overall dimensions are 16.73 × 3.54 × 1.3 inches with a listed weight of 0.65 lb.

Pomona Model 4555-0 is a do-it-yourself minigrabber test clip designed for hands-free electrical testing. It accepts wire diameters up to 0.144 in and uses a gold-plated beryllium copper contact with stainless steel spring. Supplied as a 10-piece black set.

Pomona 5953A adjustable tip test probe set includes one red and one black probe with retractable stainless steel needle tips adjustable from 0 to 3 inches. Designed with shrouded banana plugs and silicone-insulated leads, the set is rated CAT II 600 V and supports up to 3 A.

Eaton Bussmann 2432B59 semiconductor fuse delivers 10A, 250V high-speed protection for sensitive power electronics with a ceramic body and 200,000A interrupting rating in a pack of 10.

INNO Instrument PAL-1003 external sensor connection cable with BNC connector for connecting external CT or VT sensors to compatible INNO Instrument SPA series power analyzers.

The Fluke TL1550EXT is a 25 ft extended test lead set designed for use with compatible Fluke insulation resistance testers. The set includes three color-coded leads with low-leakage probes and matching alligator clips, supporting extended reach during insulation resistance testing.

Fluke TP2 Slim-Reach test probe set includes one red and one black probe with 2 mm diameter stainless steel tips. Designed for probing closely spaced or recessed terminals, the probes are rated for 10 A and suitable for CAT III 1000 V and CAT IV 600 V environments.

Eaton MOD-ALG240 LED indicator module shows energized relay status for D3/D5/D7 series relays, offering clear visual monitoring and simple plug-in installation.

Cooper Bussmann MV055F1DAX100E is a 5.5kV full-range medium voltage fuse rated at 100A with 50 kA RMS symmetrical interrupting capacity for feeder circuit, switchgear, and transformer protection.

Fluke Networks 26100103 replacement probe tips are designed for PRO3000 analog probes, ensuring reliable signal tracing in network testing tasks.

The Fluke TL222 SureGrip test lead set includes red and black silicone-insulated leads with right angle connectors on both ends. Designed for digital multimeters, these leads feature safety-shrouded banana plugs, reinforced strain relief, and a 1.5 meter cable rated for CAT IV 600 V and CAT III 1000 V applications.

Gould Shawmut A70P100-4 semiconductor fuse delivers 100A protection with 700VAC and 650VDC ratings, designed for high-speed circuit protection in power electronics and semiconductor applications.

Snap On MT2500-43 Short Test Lead Jumper: Essential tool for reliable diagnostics. Designed for precision and durability to enhance your testing efficiency.

Fluke FUSE-440MA/1000VB5 is a 440mA 1000V fast-acting replacement fuse pack engineered for Fluke digital multimeters, maintaining proper internal circuit protection and measurement safety.

INNO Instrument PAL-1002 safety BNC-to-BNC cable for connecting current sensors and measurement signals with compatible INNO power analyzers and digital power meters.

The Pomona 6341 Precision Electronic Probe Kit includes one red probe and one black probe with a full set of five replaceable tip styles. The miniature probe design supports probing of high-density circuits. Gold-plated pogo pin tips maintain constant pressure on test points for consistent readings. Silicone insulated 20 AWG leads provide flexibility and temperature resistance. Rated for 1000 VRMS and 3 A.

The Fluke CV301 is a 3 in (75 mm) ClirVu® infrared inspection window with a security key door latch. Designed for permanent installation on electrical enclosures, it enables infrared inspections without opening panel doors while maintaining enclosure ratings and safety compliance.

AEMC Fuse Set 2119.84: Fast-acting 0.1A fuses for Models 5050, 5060, 5070 & 6505. Delivers secure protection with 380V and 10kA interrupting capacity.