Search results for: 'rated its'

Pomona 3847 BNC female-to-female adapter features a hermetic seal with ultra-low leakage, gold-plated contacts, and PTFE dielectric for secure connections.

Fluke TL81A test lead kit: versatile multimeter accessory set with probes, clips, and extenders for reliable, safe electronic testing.

The Littelfuse L70S040 is a 40 A, 700 V high-speed semiconductor fuse designed for current-limiting protection of sensitive power electronics. It features a round melamine body with silver-plated copper terminals and is rated for both AC and DC systems.

Littelfuse JTD-030ID fuses deliver 30A Class J circuit protection with indicating status visibility, 600 VAC or less rating, and time-delay performance for compatible electrical systems.

The Bussmann DFJ-90 is a 90 A Class J high-speed, current-limiting drive fuse designed for protection of AC and DC drives and power semiconductor equipment. Rated 600 Vac and 450 Vdc, it provides high interrupting capacity and low let-through energy in branch circuits.

Gould Shawmut A70P100-4 semiconductor fuse delivers 100A protection with 700VAC and 650VDC ratings, designed for high-speed circuit protection in power electronics and semiconductor applications.

Mersen A155F1D0R0-65E is a 15.5kV, 65E ferrule-mounted Amp-Trap CS-3 medium voltage fuse for transformer and distribution line protection. It is an E-rated, current-limiting, non-venting fuse with visual blown-fuse indication. 

The Ferraz Shawmut USCC3 (M217522) is a 3-pole Class CC fuse holder rated 30A and 600 VAC/VDC. Designed for 35mm DIN rail mounting, it features IP20 finger-safe protection, pressure plate terminals, and a 200 kA SCCR for industrial circuit protection applications.

Eaton Bussmann 2432B59 semiconductor fuse delivers 10A, 250V high-speed protection for sensitive power electronics with a ceramic body and 200,000A interrupting rating in a pack of 10.

AEMC 2140.73 pairs a 10 ft black test lead with waterproof cap and a black alligator clip for Model 8435, supporting 1000V CAT IV test lead connection with a 15A UL-rated clip.

Pomona 4555-2 is a Do-It-Yourself Minigrabber test clip designed for hands-free electrical testing. Accepts wire up to 0.144 in diameter and 0.025 in square pins. Rated to 5 A and 300 Vrms for hands-free use. Supplied as a package of ten red test clips.

Bussmann LPJ-15SP time-delay fuse delivers 15A circuit protection with dual-element response and current-limiting performance for industrial electrical systems up to 600VAC.

Fluke TLK290 probe set: Flexible sockets and alligator clip for safe, precise testing of motors, 3-phase plugs, and 4–8 mm connections.

AEMC 2119.56 Fuse Set: 0.1A, 660V slow-blow protection for Models 1050, 1060, 6550, and 6555. High interrupting rating, durable build.

AEMC 2140.44 test lead provides a 10 ft (3 m) black measurement connection with an integrated black alligator clip for use with compatible AEMC PowerPad and PEL series electrical testing systems.

Cooper Bussmann MV055F1DAX100E is a 5.5kV full-range medium voltage fuse rated at 100A with 50 kA RMS symmetrical interrupting capacity for feeder circuit, switchgear, and transformer protection.

The Fluke CV301 is a 3 in (75 mm) ClirVu® infrared inspection window with a security key door latch. Designed for permanent installation on electrical enclosures, it enables infrared inspections without opening panel doors while maintaining enclosure ratings and safety compliance.

Bussmann BM6033B fuse block provides reliable 3-pole, 30A, 600V protection for midget fuses in industrial control panels, ensuring safe and secure circuit protection.

AEMC 5000.56 Fuse delivers reliable 500mA, 3kV protection, designed for models 5050, 5060, 5070, and 6505 test equipment.

The AEMC 2140.63 Test Lead Set pairs 10 ft color-coded electrical leads with red/black alligator clips for 8220/8230 replacement testing setups.

Fluke FUSE-440MA/1000VB5 is a 440mA 1000V fast-acting replacement fuse pack engineered for Fluke digital multimeters, maintaining proper internal circuit protection and measurement safety.

Pomona 6733-2 is a 50 ft red silicone insulated test lead wire designed for fabricating custom test leads, jumpers, or patch cords. It uses 18 AWG bare copper conductors with a high strand count for flexibility and is the same wire used in Pomona test leads and patch cords.

AEMC 2970.95 Fuse Set 0.2A 600V HPC for Model 6501: Reliable high-performance fuse designed for precise protection in test equipment applications.

Pomona Model 4555-0 is a do-it-yourself minigrabber test clip designed for hands-free electrical testing. It accepts wire diameters up to 0.144 in and uses a gold-plated beryllium copper contact with stainless steel spring. Supplied as a 10-piece black set.

Bussmann LKS-30 fuse link delivers reliable 30A time-delay protection for RES Class H systems, offering renewable 600V performance for industrial applications.