Search results for: 'outputs'

Fluke I3000S FLEX-24 AC iFlex current probe measures up to 3000 A using flexible Rogowski technology for hard-to-reach conductors.

Fluke I40S-EL AC clamp-on current transformer for low current measurement up to 40 A. Designed for accurate readings on 1 A and 5 A secondary current transformers with a compact clamp profile.

The Fluke i1010 is an AC/DC current clamp designed for use with digital multimeters. It measures currents from 1 A up to 1000 A DC and up to 600 A AC using a Hall-effect sensor. The clamp outputs 1 mV per amp for direct reading on compatible meters.

Compact, flexible AC current probe with dual range 300/3000A and selectable 10mV/A or 1mV/A outputs. Its 24" Rogowski coil fits tight spaces — ideal for use with DMMs, scopes, and power meters. Includes a 14" lead with banana plugs.

Compact AEMC MN379 AC Current Probe with 5A & 100A ranges, 200mV/A & 10mV/A outputs, 10 ft lead, BNC connector, and 40 Hz–10 kHz frequency response.

AEMC 2135.71 AC Current Probe delivers MN82 current measurement for AEMC 6471/6472 ground resistance testing, including selective and stakeless ground electrode workflows.

Compact AEMC MN379T AC Current Probe with True RMS, 5A & 100A ranges, 200mV/A & 10mV/A outputs, 10 ft BNC lead, 40 Hz–10 kHz frequency response.

Fluke i200S AC Current Clamp delivers accurate non-intrusive AC current measurement from 0.5A to 240A using a BNC voltage output, ideal for multimeters, oscilloscopes, and power quality tools.

The Fluke 80I-110S is an AC/DC current probe with BNC output designed for use with oscilloscopes, ScopeMeter test tools, power harmonics analyzers, and multimeters equipped with BNC inputs. It supports current measurements from 0.1A to 100A DC and 0.1A to 70A AC, with switchable 100mV/A and 10mV/A output settings. The probe provides 1Hz to 20kHz bandwidth, 600V AC rms working voltage, and accommodates conductors up to 11.8 mm in diameter.

Fluke i200 AC current clamp enables accurate 0.5–200A AC measurements using a multimeter. Features 1 mA/A output, banana plug interface, and CAT III 600V safety for electrical testing.

The AEMC SR601 AC Current Probe delivers 1000 A AC current measurement with a 1000:1 ratio, 1 mA/A output, and 4 mm banana jack connection for DMMs, loggers, and compatible instruments.

Fluke I400 AC Current Clamp Adapter enables safe, non-intrusive AC current measurement up to 400A using a digital multimeter. Compact design with 1 mA/A output and banana plug connection.

Fluke I410 AC/DC current clamp adapter expands digital multimeters to measure 1A–400A AC/DC using Hall-effect sensing with 1mV/A output, enabling safe, non-intrusive current measurements.

Flexible Rogowski AC current sensor with 120" coil length. Dual range 300/3000A AC with 100mV/A and 10mV/A output. Ideal for large bus bars and cable bundles. Compatible with DMMs, loggers, and power meters.

AEMC MH60 AC DC Current Probe: Portable 100A current probe with BNC output, 1MHz bandwidth, rechargeable battery, perfect for any oscilloscope.

The Fluke i400s AC Current Clamp extends current measurement capability for multimeters, power quality analyzers, and oscilloscopes. It supports AC current ranges from 0.5 A to 400 A with dual output scaling and a compact clamp design rated for CAT IV 600 V environments.

The Fluke i400s-EL-3PK AC Current Clamp 3 Pack extends the current measurement range of digital multimeters, power quality analyzers, and portable oscilloscopes. It supports measurements up to 400 A with selectable 40 A and 400 A ranges and 10 mV/A or 1 mV/A output. Rated CAT IV 600 V / CAT III 1000 V.

The Fluke i310s AC/DC current clamp is a Hall Effect-based probe designed for non-intrusive current measurement with oscilloscopes and multimeters. It supports AC and DC current measurement up to 450 A peak, with a frequency range from DC to 20 kHz and dual selectable ranges for measurement flexibility.

Fluke I30S current clamp enables accurate AC/DC current measurement using Hall Effect technology for safe, non-intrusive testing with scopes and meters.

AEMC LM103 AC Current Probe, 200A range, 1mV/A output, 5 ft lead with banana plugs, 48 Hz–10 kHz frequency, compatible with power analyzers & DMMs.

AEMC LM102 AC Current Probe, 200A range, 1mA/A output, 5 ft lead with banana plugs, 48 Hz–10 kHz frequency, ideal for power analyzers and DMMs.

AEMC JM830A AC Current Probe — 3000A range, 0.333mA/A output, low phase shift, banana plug lead — Ideal for DMMs, power, and harmonic meters.

The Fluke I17XX-FLEX3000/4PK includes four 24 in iFlex® flexible AC current probes rated to 3000 A AC. Designed for use with Fluke 17XX Energy and Power Loggers, these Rogowski-style probes connect directly to the instrument and feature 1.8 m output cables for measurement flexibility.

AEMC 2620 Leakage Current Probe: Detect low-level ground and differential faults with high accuracy, large jaw opening, and DMM compatibility.