Search results for: 'designated、'

Eagle Eye IBEX-Extended Arm Rod Set is a 30 in. LED-lit test lead extender designed for use with IBEX-Series testers to reach battery terminals in difficult locations.

The Fluke AC285 SureGrip™ Alligator Clips include one red and one black large alligator clip with nickel-plated steel jaws. Designed with rubber overmolded SureGrip surfaces, they provide a stable, comfortable grip for electrical testing. Rated CAT IV 600 V, CAT III 1000 V, 10 A.

The Fluke TP88 Rigid Back Probe Pin Set includes two fine-tip, rigid back probe pins designed for use with 2 mm test probes. The red and black insulated pins slide onto compatible probes and allow access between weather pack seals and wires. Tested to 60 V DC.

Fluke TL224 SureGrip insulated test leads include one red and one black lead with safety-shrouded standard diameter banana plugs. The leads feature a right-angle connector on one end and a straight connector on the other, reinforced strain relief, and silicone-insulated wire designed to resist heat and cold.

The Fluke TL222 SureGrip test lead set includes red and black silicone-insulated leads with right angle connectors on both ends. Designed for digital multimeters, these leads feature safety-shrouded banana plugs, reinforced strain relief, and a 1.5 meter cable rated for CAT IV 600 V and CAT III 1000 V applications.

Pomona 5953A adjustable tip test probe set includes one red and one black probe with retractable stainless steel needle tips adjustable from 0 to 3 inches. Designed with shrouded banana plugs and silicone-insulated leads, the set is rated CAT II 600 V and supports up to 3 A.

Fluke TP38 probes offer slim insulated tips for safe access to tight terminals, featuring hardened stainless steel tips and CAT IV 600V safety rating.

Fluke STL120-IV Shielded Test Lead Set: Precision 600V CAT IV leads for safe, accurate testing. Durable, high-quality design for pros. Reliable & efficient!

The Bently Nevada 02003984 is a cable extension assembly designed for use within Bently Nevada proximity measurement systems. This assembly provides an intermediate electrical connection between system components using a factory-terminated cable with integrated connectors.

The AEMC 2131.35 Replacement Safety Lead provides a 6 ft connection with 4 mm female-to-female terminations for decade box applications. Designed for reliable electrical test setups and measurement system connectivity.

Fluke TP2 Slim-Reach test probe set includes one red and one black probe with 2 mm diameter stainless steel tips. Designed for probing closely spaced or recessed terminals, the probes are rated for 10 A and suitable for CAT III 1000 V and CAT IV 600 V environments.

Fluke TP220 industrial test probes include one red and one black probe with sharp stainless steel tips for reliable electrical contact. SureGrip overmolded handles and a flexible finger barrier support steady probe placement during measurement tasks. Designed for use with compatible Fluke test leads.

The Pomona 2708 Test Lead Holder is designed to organize and support wires up to 0.450 inch (11.43 mm) in diameter. It accepts RG 213 and RG 214 cable types and provides a structured method for managing test lead routing. Overall dimensions are 16.73 × 3.54 × 1.3 inches with a listed weight of 0.65 lb.

Fluke Networks LEAD-ALIG-CLP test leads feature durable braided cables and booted alligator clips for safe, reliable connectivity with compatible Fluke telephone test sets.

Fluke AC120 Alligator Clips: Safety-insulated probe tip clips compatible with STL120 and TL75 test leads for secure electrical testing.

The Fluke AC280 SureGrip™ Hook Clips are a pair of nickel-plated electrical test clips designed for secure, hands-free measurements. Featuring a narrowing profile and controlled hook opening, they support precise connections and are rated up to CAT III 1000 V.

Snap On MT2500-43 Short Test Lead Jumper: Essential tool for reliable diagnostics. Designed for precision and durability to enhance your testing efficiency.

AEMC 2118.80 Kelvin Clips provide 20 ft test lead reach with 1-10A current capability for low-resistance measurement applications. Designed for use with compatible AEMC micro-ohmmeters.

Fluke TLK287 Test Lead Set: Precision probes and grabbers for SMD and electronics testing, compatible with Fluke 287/289 multimeters.

AEMC lead set includes 2 color-coded 4 ft red and black leads with test probes and alligator clips, ideal as replacement for models 1026 and C.A 7027.

IDEAL 85-346 Cat5e RJ45 Connector delivers reliable Ethernet cable termination for 24 AWG Cat5e cables, ideal for network installers using standard RJ45 crimp tools.

The Pomona 6341 Precision Electronic Probe Kit includes one red probe and one black probe with a full set of five replaceable tip styles. The miniature probe design supports probing of high-density circuits. Gold-plated pogo pin tips maintain constant pressure on test points for consistent readings. Silicone insulated 20 AWG leads provide flexibility and temperature resistance. Rated for 1000 VRMS and 3 A.

Fluke AC285-FTP Clips: Secure, high-voltage alligator clips and adaptors for FTP-1 and FTPL-1 probes. 1000V rated, firm SureGrip design.

AEMC 2135.82 Calibration Loop for Model 6474 supports ground resistance tester calibration and verification workflows for compatible CA 6474 systems.

The Fluke TL1550EXT is a 25 ft extended test lead set designed for use with compatible Fluke insulation resistance testers. The set includes three color-coded leads with low-leakage probes and matching alligator clips, supporting extended reach during insulation resistance testing.