Search results for: 'for one'

Fluke TL224 SureGrip insulated test leads include one red and one black lead with safety-shrouded standard diameter banana plugs. The leads feature a right-angle connector on one end and a straight connector on the other, reinforced strain relief, and silicone-insulated wire designed to resist heat and cold.

Snap On MT2500-43 Short Test Lead Jumper: Essential tool for reliable diagnostics. Designed for precision and durability to enhance your testing efficiency.

The Pomona 6341 Precision Electronic Probe Kit includes one red probe and one black probe with a full set of five replaceable tip styles. The miniature probe design supports probing of high-density circuits. Gold-plated pogo pin tips maintain constant pressure on test points for consistent readings. Silicone insulated 20 AWG leads provide flexibility and temperature resistance. Rated for 1000 VRMS and 3 A.

AEMC 2152.28 fused lead set includes 2 color-coded 6.5 ft leads, screw-on alligator clips, test probes, and 5 UL-certified 0.63A fuses for safe testing.

AEMC 2135.78 Green Extension Lead delivers a 5 m reach on an H reel for general test equipment accepting a 4 mm safety banana plug.

The Pomona 6235 is an SMD microtip test probe set designed for probing surface-mount device contacts. It includes one red and one black 48-inch lead with curved, flexible stainless-steel needle tips to aid access to hard-to-reach areas while reducing risk of damage.

Pomona 5953A adjustable tip test probe set includes one red and one black probe with retractable stainless steel needle tips adjustable from 0 to 3 inches. Designed with shrouded banana plugs and silicone-insulated leads, the set is rated CAT II 600 V and supports up to 3 A.

Fluke TP2 Slim-Reach test probe set includes one red and one black probe with 2 mm diameter stainless steel tips. Designed for probing closely spaced or recessed terminals, the probes are rated for 10 A and suitable for CAT III 1000 V and CAT IV 600 V environments.

The Fluke TL75 Hard Point Test Lead Set combines test lead and probe into a single unit for general-purpose electrical measurements. This set includes one red and one black PVC-insulated lead, each 48 inches long, with right-angle shrouded banana plugs and removable protective caps.

AEMC 2135.86 BNC 150 ft M/F Extension Lead provides extended BNC connectivity for compatible electrical testing and measurement equipment requiring male-to-female BNC cable extension capability.

The Fluke TL222 SureGrip test lead set includes red and black silicone-insulated leads with right angle connectors on both ends. Designed for digital multimeters, these leads feature safety-shrouded banana plugs, reinforced strain relief, and a 1.5 meter cable rated for CAT IV 600 V and CAT III 1000 V applications.

Measure low resistance with confidence using the Megger DLRO10HD Dual Power 10A Digital Ohmmeter! Portable, accurate, and dual-powered for on-the-go testing. Ready to upgrade your electrical diagnostics? Contact us today!

The Bently Nevada 02003984 is a cable extension assembly designed for use within Bently Nevada proximity measurement systems. This assembly provides an intermediate electrical connection between system components using a factory-terminated cable with integrated connectors.

Fluke TP220 industrial test probes include one red and one black probe with sharp stainless steel tips for reliable electrical contact. SureGrip overmolded handles and a flexible finger barrier support steady probe placement during measurement tasks. Designed for use with compatible Fluke test leads.

AEMC 2135.79 Replacement Black Extension Lead provides a 5 m connection solution for Model 6474 and compatible test equipment using 4 mm safety banana plug interfaces.

The Fluke AC285 SureGrip™ Alligator Clips include one red and one black large alligator clip with nickel-plated steel jaws. Designed with rubber overmolded SureGrip surfaces, they provide a stable, comfortable grip for electrical testing. Rated CAT IV 600 V, CAT III 1000 V, 10 A.

Pomona 5898 extra durable DMM test lead set with stainless steel probe tips, 4mm shrouded banana plugs, silicone-insulated leads, and CAT III 1000V rating for precise, reliable multimeter measurements.

INNO Instrument PAL-1001 measurement lead set with red and black leads, safety connectors, 1000V CAT II / 600V CAT III rating, and 32A current rating for compatible INNO Instrument power meters and power analyzers.

IDEAL 85-346 Cat5e RJ45 Connector delivers reliable Ethernet cable termination for 24 AWG Cat5e cables, ideal for network installers using standard RJ45 crimp tools.

Fluke industrial test lead set includes SureGrip clips, test probes, temperature probe, and soft case for accurate, safe electrical measurements.

Rohde & Schwarz FSH-Z1 true RMS terminating RF power sensor for 10 MHz–8 GHz measurements, providing accurate average power analysis and direct compatibility with FSH series handheld spectrum analyzers.

AEMC 2129.72 Kelvin Lead Set provides 25 ft Kelvin leads with 200A Hippo clamps for use with AEMC Model 6292 low-resistance testing applications requiring secure current and potential connections.

Pomona 5144-48-0 SMD Microtip Test Probe delivers precise probing of surface-mount contacts using a flexible stainless steel microtip and 48-inch lead with stacking banana plug for reliable electronics testing.

AEMC lead set includes 2 color-coded 4 ft red and black leads with test probes and alligator clips, ideal as replacement for models 1026 and C.A 7027.

Fluke TL81A test lead kit: versatile multimeter accessory set with probes, clips, and extenders for reliable, safe electronic testing.