Search results for: 'rodo rate'

The Fluke TL222 SureGrip test lead set includes red and black silicone-insulated leads with right angle connectors on both ends. Designed for digital multimeters, these leads feature safety-shrouded banana plugs, reinforced strain relief, and a 1.5 meter cable rated for CAT IV 600 V and CAT III 1000 V applications.

Fluke TL224 SureGrip insulated test leads include one red and one black lead with safety-shrouded standard diameter banana plugs. The leads feature a right-angle connector on one end and a straight connector on the other, reinforced strain relief, and silicone-insulated wire designed to resist heat and cold.

Pomona 4555-2 is a Do-It-Yourself Minigrabber test clip designed for hands-free electrical testing. Accepts wire up to 0.144 in diameter and 0.025 in square pins. Rated to 5 A and 300 Vrms for hands-free use. Supplied as a package of ten red test clips.

AEMC replacement set of 2 needle tip test leads, color-coded red/black with 4mm right-angle plugs. Rated 600V CAT IV shielded, fits meters 5212-5217.

The Fluke TL75 Hard Point Test Lead Set combines test lead and probe into a single unit for general-purpose electrical measurements. This set includes one red and one black PVC-insulated lead, each 48 inches long, with right-angle shrouded banana plugs and removable protective caps.

Pomona 6733-2 is a 50 ft red silicone insulated test lead wire designed for fabricating custom test leads, jumpers, or patch cords. It uses 18 AWG bare copper conductors with a high strand count for flexibility and is the same wire used in Pomona test leads and patch cords.

INNO Instrument PAL-1001 measurement lead set with red and black leads, safety connectors, 1000V CAT II / 600V CAT III rating, and 32A current rating for compatible INNO Instrument power meters and power analyzers.

Fluke TL81A test lead kit: versatile multimeter accessory set with probes, clips, and extenders for reliable, safe electronic testing.

AEMC fused test lead set with red/black color coding, 6.5ft length, 4mm banana plugs, and built-in 0.63A fuses for safe 1000V CAT IV measurements.

Fluke TL935 Patch Cord Kit includes durable red and black 4 mm banana plug leads in 3 lengths for safe, flexible electrical testing and reliable connections.

Fluke AC285-FTP Clips: Secure, high-voltage alligator clips and adaptors for FTP-1 and FTPL-1 probes. 1000V rated, firm SureGrip design.

The Fluke AC280 SureGrip™ Hook Clips are a pair of nickel-plated electrical test clips designed for secure, hands-free measurements. Featuring a narrowing profile and controlled hook opening, they support precise connections and are rated up to CAT III 1000 V.

Fluke TP2 Slim-Reach test probe set includes one red and one black probe with 2 mm diameter stainless steel tips. Designed for probing closely spaced or recessed terminals, the probes are rated for 10 A and suitable for CAT III 1000 V and CAT IV 600 V environments.

The Pomona 6341 Precision Electronic Probe Kit includes one red probe and one black probe with a full set of five replaceable tip styles. The miniature probe design supports probing of high-density circuits. Gold-plated pogo pin tips maintain constant pressure on test points for consistent readings. Silicone insulated 20 AWG leads provide flexibility and temperature resistance. Rated for 1000 VRMS and 3 A.

The Fluke AC285 SureGrip™ Alligator Clips include one red and one black large alligator clip with nickel-plated steel jaws. Designed with rubber overmolded SureGrip surfaces, they provide a stable, comfortable grip for electrical testing. Rated CAT IV 600 V, CAT III 1000 V, 10 A.

AEMC 2118.82 Kelvin Clips deliver 10 ft lead reach for micro-ohmmeters Models 5600, 6240, and 6250 with fork terminal termination.

AEMC 2118.70 Kelvin Clips provide 20 ft color-coded 10A Hippo test leads with spade lug terminations for compatible micro-ohmmeter connections.

The Pomona 6235 is an SMD microtip test probe set designed for probing surface-mount device contacts. It includes one red and one black 48-inch lead with curved, flexible stainless-steel needle tips to aid access to hard-to-reach areas while reducing risk of damage.

AEMC 1017.84 Kelvin Clips provide a 10 ft, 10A Hippo-style Kelvin connection set for supported AEMC micro-ohmmeters using fork terminal termination.

Pomona 5953A adjustable tip test probe set includes one red and one black probe with retractable stainless steel needle tips adjustable from 0 to 3 inches. Designed with shrouded banana plugs and silicone-insulated leads, the set is rated CAT II 600 V and supports up to 3 A.

Measure low resistance with confidence using the Megger DLRO10HD Dual Power 10A Digital Ohmmeter! Portable, accurate, and dual-powered for on-the-go testing. Ready to upgrade your electrical diagnostics? Contact us today!

The Fluke TP88 Rigid Back Probe Pin Set includes two fine-tip, rigid back probe pins designed for use with 2 mm test probes. The red and black insulated pins slide onto compatible probes and allow access between weather pack seals and wires. Tested to 60 V DC.

AEMC 2152.28 fused lead set includes 2 color-coded 6.5 ft leads, screw-on alligator clips, test probes, and 5 UL-certified 0.63A fuses for safe testing.

Fluke TP38 probes offer slim insulated tips for safe access to tight terminals, featuring hardened stainless steel tips and CAT IV 600V safety rating.

Pomona 5898 extra durable DMM test lead set with stainless steel probe tips, 4mm shrouded banana plugs, silicone-insulated leads, and CAT III 1000V rating for precise, reliable multimeter measurements.