Search results for: 'connection'

Hubbell HBL4770C Twist-Lock plug delivers a 15A, 277V NEMA L7-15P grounding connection for 2-pole, 3-wire electrical use.

AEMC 2119.45 RS-232 DB9 F/F 6 ft Null Modem Cable delivers PC connection support for AEMC 1060, 5060, 5070, 6250, and 6255 instruments.

INNO Instrument PTB01 is a single-phase wiring test adapter box used for switching single-phase circuits to support power coefficient measurement and related electrical testing workflows.

INNO Instrument PTB02 is an external sensor connection fittings accessory identified in the SPAW7000 accessory catalog for power analysis wavecorder setups.

Fireye 60-2919-1 is a 1 in NPT mounting flange for Phoenix and InSight II flame scanner installations, supporting scanner mounting, purge air routing, and thermal isolation in burner systems.

INNO Instrument PAC-1002 BNC conversion adapter for safety BNC to banana connection, rated 600V CAT III and listed as an accessory for the SPAW7000 power analysis wavecorder.

INNO Instrument PTB03 is a three-phase wiring adapter box used as a test converter for switching three-phase connections during electrical measurement and power analysis workflows.

Control Devices Style 260 is a 2 in. Dry Link dry disconnect adapter for bulk fluid transfer systems. It serves as the fixed adapter half of a dry disconnect coupling assembly used where controlled connection and separation are required.

INNO Instrument PAC-1005 Safety Terminal-Mini Clip Adapter (Hook Type) for electrical measurement connections, confirmed as compatible with the SPAW7000.

Wohler 8978 Push Head Adapter connects M10 threaded and Perlon brushes to Snap & Sweep rods for rotary chimney, exhaust pipe, and ventilation duct cleaning.

INNO Instrument PAC-1004 Safety Adapter with safety connector and spring hold type. Rated 600V, CAT II, 10A, with red and black adapter components.

AEMC 2124.76 PROBIX 4mm Banana Plug Adapter connects compatible banana plug leads for use with AEMC OXII and OXIII Oscilloscope Series workflows.

The AEMC 2140.40 BNC Adapter links compatible AC/DC current probes with supported AEMC power and energy instruments for clean probe-to-instrument connectivity.

AEMC 2135.80 replacement C-clamp set includes three replacement clamps designed for use with Model 6472 and 6474 ground resistance testing kits.

The INNO USB Type-C to USB Type-A (Female) Cable is an OTG adapter designed for INNO View-series fusion splicers equipped with a USB-C interface. It enables connection of standard USB-A peripherals such as flash drives, mice, or keyboards for data transfer and accessory operation.

AEMC 2118.49 Adapter 110V Outlet with 4mm Banana Plugs: Designed for models L230, L260, L261, L481, L562, 6681, 8220, and 8230. Reliable and efficient.

AEMC HX0032 PRHX5 50 Ohm Adapter: Reliable connection for OX Oscilloscope Series. Precision built for seamless testing and accurate data capture.

The Gates 32CFHS G60899-0032 is a Code 61 SAE J518 split flange set used in high-pressure hydraulic systems. It is designed to connect ports directly to hoses and resist shock loads and vibration. The set includes two flange halves, an O-ring, and Grade 8 mounting hardware.

Bently Nevada 330102-00-40-10-02-00 proximity probe cable assembly for 3300 XL 8 mm monitoring setups, built for proximity measurement connection in machinery monitoring systems.

INNO Instrument PAC-1006 large alligator clip adapter set with red and black insulated clips, safety connector interface, and 600V CAT IV 19A rating.

AEMC HX0031 PRHX4 BNC Adapter for seamless connection with OX Oscilloscope Series. Ensures quick setup, accuracy, and durable lab-grade performance.

AEMC 2135.41 Optical USB Cable replacement supports compatible AEMC models including 6240, 6470/6470-B, 6471, 6472, 6550, 6555, 8220, 8230, and MTX 328x Series.

Fluke Networks 26501100 BNC-to-Alligator cable ensures reliable signal transfer between TS100/TS90 testers with durable copper conductors.

Swagelok SS-4BHT-12 is a T Series PTFE-lined stainless steel braided hose assembly with dual 1/4 in. Swagelok tube adapters. It features a 14 in. hose length with 10.2 in. live length and a temperature range of -65°F to 450°F.

The Inno Instrument HDMI to USB Cable is a communication interface designed for Inno Instrument VIEW series fusion splicers, including VIEW 3, VIEW 5, VIEW 7, and VIEW 12R models. It connects the splicer’s Micro HDMI port to a standard USB Type-A port on a computer for data transfer, software updates, and graphical interface mirroring.