Search results for: 'Cable'

The INNO Instrument RS-PLUS Ribbon Splitter Tool is a compact, all-metal de-ribbonizer designed to separate multi-fiber ribbon cables into sub-groups or individual fibers. It supports 4, 8, and 12-fiber ribbons and enables controlled fiber preparation prior to splicing in fiber optic networks.

The INNO Instrument SC-SM-APC-09 is a field-installable SC/APC singlemode splice-on connector supplied in 10 a pack. Designed for fusion splicer termination, the connector houses and protects the fusion splice within the connector body, eliminating separate splice trays. The cleaved and polished ferrule supports repeatable field assembly.

The INNO B-80 is a 16-position replacement blade designed for INNO fiber cleavers including V7, V7+, V10, V11, V12, V17, VF-15, VF-15H, and VF-78 models. Rated for up to 48,000 cleaves, the B-80 replaces the B-77 blade and supports consistent fiber cleaving in installation and maintenance environments.

FTTH Innovations FIG air blown microfibre installation tool with electronic push force control and cruise control mode for controlled fibre installation in microduct at speeds up to 100 m/min.

The INNO Instrument SC-SM-UPC-09 is a 10-pack of single-mode SC/UPC splice-on connectors for 900µm fiber. Designed for fusion splicer termination, these connectors eliminate polishing, adhesives, and mechanical splicing. With typical ≤0.2 dB insertion loss and ≥55 dB return loss, they support G.652D and G.657A2 fiber types.

The INNO Instrument IN-RS-40mm ribbon fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to protect ribbon fiber fusion splices. The sleeve incorporates a single ceramic reinforcement rod for structural support and alignment protection after splicing. A clear heat-shrinkable outer tube combined with an internal EVA adhesive liner.

The INNO Instrument IN-RD-40mm ribbon fiber protection sleeve provides environmental and mechanical protection for ribbon fiber fusion splices. The 40 mm heat-shrink sleeve incorporates a double ceramic rod structure that maintains alignment and rigidity during the shrinking process.

The INNO Instrument IN-SS-60mm fiber splice protection sleeves provide mechanical reinforcement for fusion-spliced optical fibers. Each 60 mm sleeve uses a clear heat-shrink polyolefin outer tube, internal adhesive liner, and stainless steel strength member to support fiber alignment after the splicing process.

The INNO Instrument FH Series Ribbon Fiber Holders are detachable accessories designed for use with INNO fusion splicers such as the View4M and View12R. These holders secure and align ribbon fibers during preparation and splicing, supporting configurations from 2-fiber to 12-fiber ribbons with 250µm coatings.

Fluke Networks D914S Impact Tool delivers high-quality terminations with ergonomic design, torque-impact combo, and built-in hook and spudge

Fluke Networks solvent pen delivers precision fiber cleaning with static-neutralizing solvent for superior end-face contamination removal.

Fluke Networks fiber optic swabs: 2.5mm cleaning solution for SC, ST, and FC ports, ensuring spotless connections in bulkheads and tight spaces.

Fluke Networks fiber installation kit with Visual Fault Locator and FiberLert Detector ensures fast, accurate testing and troubleshooting of fiber optic networks.

Fluke Networks NFA-LC interchangeable LC adapters enable accurate optical power measurements with SimpliFiber Pro, CertiFiber Pro, and DTX-xFM2.

Fluke Networks NFC-KIT-CASE-E: Lint-free fiber optic cleaning kit with cleaners, solvent pen, and cube for optimal network performance.

Fluke Networks QC-MMC-12-24-5P QuickClean cleaners provide fast, reliable cleaning for 12–24 MMC fiber connectors. Pack of five for field and lab maintenance.

Fluke Networks ADP-SC/APC SC-APC simplex adapter provides reliable fiber connections for CertiFiber Pro, enabling fast, durable testing of SC/APC links.

The INNO Instrument HTS-SOC-01 is a heater cover accessory designed for use with compatible INNO fusion splicers. It replaces the standard heater cover to support splice-on connector (SOC) termination workflows where connector geometry requires an alternate heater configuration.

The INNO Instrument EG-18 Electrode Grinder is a portable maintenance tool designed to resurface tungsten electrode rods used in fiber optic fusion splicers. It restores electrode tip geometry to support stable arc discharge and consistent splicing performance in field and lab environments.

The INNO Instrument UN1CO Mobile is a compact fiber splicing workstation tray designed to securely support a fusion splicer and cleaver during field operations. Constructed from reinforced plastic, the tray provides integrated magnetic fixing, a dedicated cleaver mount, and organized compartments for splice protection sleeves and cleaning liquids.

Fluke Networks fiber cleaner: Cleans 2.5mm SC, ST, FC, E2000 connectors, 525+ end faces per unit, push-to-use with audible click.

The INNO Instrument UN1COMT is a portable fiber splicing work tray with tripod designed for FTTH field operations. It provides a stable, elevated platform for securing fusion splicers and tools during ground-based or aerial work. The tray features integrated tool compartments and magnetic fixing points for organized equipment handling.

The INNO Instrument UN1COLK UN1CO Ladder Mount Work Platform is an ABS workstation designed for secure positioning on ladder rungs during fiber splicing operations. It provides a stable surface for INNO View series fusion splicers and common industry cleavers in elevated or confined environments.

The INNO Instrument UN1COMP is a modular fiber splicing workstation kit designed for mobile and elevated field operations. The system includes the UN1CO Mobile tray, tripod stand, ladder and pole mounting brackets, and the UN1CO backpack.  The included mounting options allow use as a wearable workstation and tripod-mounted table.