Search results for: 'optical fiber cables'

The INNO Instrument SC-SM-UPC-30 is a 10-pack of SC/UPC single-mode splice-on connectors designed for 3.0mm fiber cables. Each connector is factory pre-cleaved and pre-polished to support consistent optical performance, with typical insertion loss of 0.15 dB and return loss ≥55 dB.

The INNO Instrument IN-SS-60mm fiber splice protection sleeves provide mechanical reinforcement for fusion-spliced optical fibers. Each 60 mm sleeve uses a clear heat-shrink polyolefin outer tube, internal adhesive liner, and stainless steel strength member to support fiber alignment after the splicing process.

The INNO Instrument IN-SS-40mm fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to reinforce single-fiber fusion splices. A stainless steel strength member helps prevent bending while the clear outer tube allows inspection of the splice during installation.

Fluke Networks fiber cleaner: Cleans 2.5mm SC, ST, FC, E2000 connectors, 525+ end faces per unit, push-to-use with audible click.

Fluke Networks QC-LC-DUPLEX-1P QuickClean tool cleans LC duplex connectors, delivering fast, reliable endface cleaning in a convenient single-pack format.

Fluke Networks ADP-SC/APC SC-APC simplex adapter provides reliable fiber connections for CertiFiber Pro, enabling fast, durable testing of SC/APC links.

The INNO Instrument SC-SM-UPC-30S is a 10-pack of SC single-mode UPC splice-on connectors designed for 3.0mm jacketed fiber. Using fusion splice termination, these short boot SOC connectors provide stable optical performance without field polishing or index-matching gels.

Fluke Networks fiber installation kit with Visual Fault Locator and FiberLert Detector ensures fast, accurate testing and troubleshooting of fiber optic networks.

Fluke Networks QC-MMC-12-24-5P QuickClean cleaners provide fast, reliable cleaning for 12–24 MMC fiber connectors. Pack of five for field and lab maintenance.

The INNO Instrument SC-SM-UPC-09 is a 10-pack of single-mode SC/UPC splice-on connectors for 900µm fiber. Designed for fusion splicer termination, these connectors eliminate polishing, adhesives, and mechanical splicing. With typical ≤0.2 dB insertion loss and ≥55 dB return loss, they support G.652D and G.657A2 fiber types.

The INNO Instrument EG-18 Electrode Grinder is a portable maintenance tool designed to resurface tungsten electrode rods used in fiber optic fusion splicers. It restores electrode tip geometry to support stable arc discharge and consistent splicing performance in field and lab environments.

The INNO Instrument TS Pro Thermal Stripper is designed for removing coating and jacket from optic fibers, supporting single fiber up to 12 ribbon fibers. It accommodates coating diameters from 200 μm to 400 μm and provides selectable heating modes with controlled temperature settings.

The INNO Instrument DC300A Flat Cable Stripper is an aluminum stripping tool designed for 3 × 2 mm flat drop cable, 900 µm coating fiber, and 250 µm coating fiber. It features three side blades and an integrated locating ruler for consistent cleaver length positioning. 

The INNO Instrument IN-SS-45mm fiber splice protection sleeves are heat-shrink sleeves designed to reinforce and protect single fiber fusion splices. Each sleeve uses a composite structure consisting of a cross-linked polyolefin outer tube, hot-melt adhesive inner layer, and stainless steel reinforcing rod.

The INNO B-80 is a 16-position replacement blade designed for INNO fiber cleavers including V7, V7+, V10, V11, V12, V17, VF-15, VF-15H, and VF-78 models. Rated for up to 48,000 cleaves, the B-80 replaces the B-77 blade and supports consistent fiber cleaving in installation and maintenance environments.

The INNO Instrument SC-SM-APC-30S is a 10-pack of single-mode SC/APC splice-on connectors designed for 3.0mm fiber cables. Featuring a short boot configuration, these pre-cleaved and pre-polished connectors enable fusion-spliced terminations using compatible INNO Instrument fusion splicers.

The INNO Instrument IN-RS-40mm ribbon fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to protect ribbon fiber fusion splices. The sleeve incorporates a single ceramic reinforcement rod for structural support and alignment protection after splicing. A clear heat-shrinkable outer tube combined with an internal EVA adhesive liner.

The INNO Instruments UN1COMK UN1CO Mobile Smart Tray Kit is a portable workstation designed for fiber optic fusion splicing in elevated and field environments. The UN1CO Mobile Kit supports wearable, tripod, ladder, and pole-mounted configurations for field-based fiber installation work.

Fluke Networks QC-MPO-16/32-5P QuickClean cleaner removes contaminants from MPO 16/32 fiber connectors using a simple push-to-clean action.

Discover the Hexatronic Ribbonet Air Blown Fiber Installation Tool. This portable, efficient tool uses compressed air and an electric motor for fast fiber installations. Perfect for microduct applications, it ensures quick and reliable setups. Learn more about its benefits and how it can enhance your fiber optic installations today!

Fluke JackRapid tool: Terminate jacks 8x faster with precision. One-handed squeeze action with built-in blade for accurate, effortless cable termination.

The INNO Instrument UN1COLK UN1CO Ladder Mount Work Platform is an ABS workstation designed for secure positioning on ladder rungs during fiber splicing operations. It provides a stable surface for INNO View series fusion splicers and common industry cleavers in elevated or confined environments.

The INNO Instrument SC-SM-APC-09 is a field-installable SC/APC singlemode splice-on connector supplied in 10 a pack. Designed for fusion splicer termination, the connector houses and protects the fusion splice within the connector body, eliminating separate splice trays. The cleaved and polished ferrule supports repeatable field assembly.

Fluke Networks D914S Impact Tool delivers high-quality terminations with ergonomic design, torque-impact combo, and built-in hook and spudge

Fluke JackRapid Termination Tool: Terminate jacks 8x faster with ergonomic, one-handed operation and reliable, high-quality connections.