Search results for: 'taxable'

Fluke Networks MRC-625-EFC-SCLC-M TRC delivers 62.5 µm multimode EF-compliant testing with SC to metal LC connectors for precise optical loss measurements.

Fluke Networks MRC-50-EFC-SCST 2m Encircled Flux TRC provides accurate multimode 50 µm SC/ST fiber testing for standards-compliant certification and loss measurements.

Fluke Networks SMC-9-SCST launch cable delivers 160m singlemode fiber for accurate OTDR testing, stable network connectivity, and compatibility with OptiFiber units.

The INNO Instrument SC-SM-APC-09 is a field-installable SC/APC singlemode splice-on connector supplied in 10 a pack. Designed for fusion splicer termination, the connector houses and protects the fusion splice within the connector body, eliminating separate splice trays. The cleaved and polished ferrule supports repeatable field assembly.

The INNO Instrument RS-PLUS Ribbon Splitter Tool is a compact, all-metal de-ribbonizer designed to separate multi-fiber ribbon cables into sub-groups or individual fibers. It supports 4, 8, and 12-fiber ribbons and enables controlled fiber preparation prior to splicing in fiber optic networks.

The INNO Instrument UN1COLK UN1CO Ladder Mount Work Platform is an ABS workstation designed for secure positioning on ladder rungs during fiber splicing operations. It provides a stable surface for INNO View series fusion splicers and common industry cleavers in elevated or confined environments.

The INNO Instrument UN1COMP is a modular fiber splicing workstation kit designed for mobile and elevated field operations. The system includes the UN1CO Mobile tray, tripod stand, ladder and pole mounting brackets, and the UN1CO backpack.  The included mounting options allow use as a wearable workstation and tripod-mounted table.

The INNO B-80 is a 16-position replacement blade designed for INNO fiber cleavers including V7, V7+, V10, V11, V12, V17, VF-15, VF-15H, and VF-78 models. Rated for up to 48,000 cleaves, the B-80 replaces the B-77 blade and supports consistent fiber cleaving in installation and maintenance environments.

FTTH Innovations FIG air blown microfibre installation tool with electronic push force control and cruise control mode for controlled fibre installation in microduct at speeds up to 100 m/min.

The INNO Instruments UN1COMK UN1CO Mobile Smart Tray Kit is a portable workstation designed for fiber optic fusion splicing in elevated and field environments. The UN1CO Mobile Kit supports wearable, tripod, ladder, and pole-mounted configurations for field-based fiber installation work.

The INNO Instrument TS Pro Thermal Stripper is designed for removing coating and jacket from optic fibers, supporting single fiber up to 12 ribbon fibers. It accommodates coating diameters from 200 μm to 400 μm and provides selectable heating modes with controlled temperature settings.

The INNO Instrument IN-SS-45mm fiber splice protection sleeves are heat-shrink sleeves designed to reinforce and protect single fiber fusion splices. Each sleeve uses a composite structure consisting of a cross-linked polyolefin outer tube, hot-melt adhesive inner layer, and stainless steel reinforcing rod.

The INNO Instrument IN-SS-40mm fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to reinforce single-fiber fusion splices. A stainless steel strength member helps prevent bending while the clear outer tube allows inspection of the splice during installation.

The INNO Instrument IN-RS-40mm ribbon fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to protect ribbon fiber fusion splices. The sleeve incorporates a single ceramic reinforcement rod for structural support and alignment protection after splicing. A clear heat-shrinkable outer tube combined with an internal EVA adhesive liner.

The INNO Instrument SC-SM-UPC-30S is a 10-pack of SC single-mode UPC splice-on connectors designed for 3.0mm jacketed fiber. Using fusion splice termination, these short boot SOC connectors provide stable optical performance without field polishing or index-matching gels.

The INNO Instrument SC-SM-APC-30 is a 10-pack of SC-type single-mode splice-on connectors designed for 3.0mm fiber cables. Featuring APC polish and pre-polished factory ferrules, these connectors support fusion splice termination with low insertion loss and high return loss performance.

The INNO Instrument SC-SM-UPC-09 is a 10-pack of single-mode SC/UPC splice-on connectors for 900µm fiber. Designed for fusion splicer termination, these connectors eliminate polishing, adhesives, and mechanical splicing. With typical ≤0.2 dB insertion loss and ≥55 dB return loss, they support G.652D and G.657A2 fiber types.

The INNO Instrument V7+ Fiber Cleaver supports single fiber 160µm–900µm, 2–3mm, and drop cable, plus ribbon fiber up to 12 cores. It features 2-step operation, blade pushback reclaim function, <0.5° typical cleave angle, and an integrated automatic shard collector.

Fluke Networks FMC-1G enables 1 Gb/s fiber port testing with LinkIQ tools, providing SFPs, media converter, diagnostics, and a portable battery for field troubleshooting.

Hexatronic Stingray Air Blown Fiber Installation Tool is built for microduct ABF installation across 3, 5 and 7 mm duct sizes, with the guides, nozzles and 7mm duct clamp needed for controlled fiber deployment in the field.

The INNO Instrument IN-SS-60mm fiber splice protection sleeves provide mechanical reinforcement for fusion-spliced optical fibers. Each 60 mm sleeve uses a clear heat-shrink polyolefin outer tube, internal adhesive liner, and stainless steel strength member to support fiber alignment after the splicing process.

The INNO Instrument IN-RD-40mm ribbon fiber protection sleeve provides environmental and mechanical protection for ribbon fiber fusion splices. The 40 mm heat-shrink sleeve incorporates a double ceramic rod structure that maintains alignment and rigidity during the shrinking process.

The INNO Instrument SC-SM-UPC-30 is a 10-pack of SC/UPC single-mode splice-on connectors designed for 3.0mm fiber cables. Each connector is factory pre-cleaved and pre-polished to support consistent optical performance, with typical insertion loss of 0.15 dB and return loss ≥55 dB.

NNO Instrument V12 PRO Fiber Cleaver delivers fully automatic cleaving with 0.5° typical angle, 5–24 mm cleave length range, auto blade rotation up to 60,000 cleaves, and support for single, ribbon, and drop fiber cables.