Search results for: 'ins'

The INNO Instrument IN-SS-60mm fiber splice protection sleeves provide mechanical reinforcement for fusion-spliced optical fibers. Each 60 mm sleeve uses a clear heat-shrink polyolefin outer tube, internal adhesive liner, and stainless steel strength member to support fiber alignment after the splicing process.

Fluke JackRapid tool: Terminate jacks 8x faster with precision. One-handed squeeze action with built-in blade for accurate, effortless cable termination.

The INNO Instrument IN-SS-45mm fiber splice protection sleeves are heat-shrink sleeves designed to reinforce and protect single fiber fusion splices. Each sleeve uses a composite structure consisting of a cross-linked polyolefin outer tube, hot-melt adhesive inner layer, and stainless steel reinforcing rod.

The INNO Instrument IN-SS-40mm fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to reinforce single-fiber fusion splices. A stainless steel strength member helps prevent bending while the clear outer tube allows inspection of the splice during installation.

The INNO Instrument IN-RS-40mm ribbon fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to protect ribbon fiber fusion splices. The sleeve incorporates a single ceramic reinforcement rod for structural support and alignment protection after splicing. A clear heat-shrinkable outer tube combined with an internal EVA adhesive liner.

The INNO Instrument IN-RD-40mm ribbon fiber protection sleeve provides environmental and mechanical protection for ribbon fiber fusion splices. The 40 mm heat-shrink sleeve incorporates a double ceramic rod structure that maintains alignment and rigidity during the shrinking process.

Fluke Networks QC-LC-DUPLEX-1P QuickClean tool cleans LC duplex connectors, delivering fast, reliable endface cleaning in a convenient single-pack format.

Fluke Networks D914S Impact Tool delivers high-quality terminations with ergonomic design, torque-impact combo, and built-in hook and spudge

Fluke Networks NFC-SWABS-1.25MM fiber optic cleaning swabs are designed for LC and MU ports, delivering precise 1.25mm bulkhead cleaning with lint-free material for effective wet or dry connector maintenance.

FTTH Innovations FIG air blown microfibre installation tool with electronic push force control and cruise control mode for controlled fibre installation in microduct at speeds up to 100 m/min.

The INNO Instrument EG-18 Electrode Grinder is a portable maintenance tool designed to resurface tungsten electrode rods used in fiber optic fusion splicers. It restores electrode tip geometry to support stable arc discharge and consistent splicing performance in field and lab environments.

Fluke Networks QC-MPO-16/32-5P QuickClean cleaner removes contaminants from MPO 16/32 fiber connectors using a simple push-to-clean action.

Fluke Networks fiber optic swabs: 2.5mm cleaning solution for SC, ST, and FC ports, ensuring spotless connections in bulkheads and tight spaces.

Fluke Networks SRC-9-SCST: 2m singlemode fiber optic test cord with SC/ST connectors for accurate optical testing and dependable network performance.

Fluke Networks MRC-50-EFC-SCST 2m Encircled Flux TRC provides accurate multimode 50 µm SC/ST fiber testing for standards-compliant certification and loss measurements.

Fluke Networks SMC-9-SCST launch cable delivers 160m singlemode fiber for accurate OTDR testing, stable network connectivity, and compatibility with OptiFiber units.

The INNO Instrument SC-SM-APC-09 is a field-installable SC/APC singlemode splice-on connector supplied in 10 a pack. Designed for fusion splicer termination, the connector houses and protects the fusion splice within the connector body, eliminating separate splice trays. The cleaved and polished ferrule supports repeatable field assembly.

The INNO Instrument RS-PLUS Ribbon Splitter Tool is a compact, all-metal de-ribbonizer designed to separate multi-fiber ribbon cables into sub-groups or individual fibers. It supports 4, 8, and 12-fiber ribbons and enables controlled fiber preparation prior to splicing in fiber optic networks.

The INNO Instrument TS Pro Thermal Stripper is designed for removing coating and jacket from optic fibers, supporting single fiber up to 12 ribbon fibers. It accommodates coating diameters from 200 μm to 400 μm and provides selectable heating modes with controlled temperature settings.

Fluke Networks PA-LC Fiber Optic Adapter: Durable, versatile LC network connector for precise OTDR testing and seamless fiber network extension.

Fluke Networks fiber installation kit with Visual Fault Locator and FiberLert Detector ensures fast, accurate testing and troubleshooting of fiber optic networks.

Fluke Networks NFA-LC interchangeable LC adapters enable accurate optical power measurements with SimpliFiber Pro, CertiFiber Pro, and DTX-xFM2.