Search results for: 'application is'

Used Waygate Technologies Gamma 5.0/50 5.0 MHz 0.50" straight beam ultrasonic transducer featuring a side-mounted Microdot connector. Designed for precise flaw detection and material inspection on thick plates, forgings, and castings. Fully tested and certified for reliable NDT performance.

Olympus AM2R-20X22-60 is a 2 MHz, 20x22 mm angle beam shear wave ultrasonic probe (Atlas Series) with a 60° angle in steel and right angle LEMO 1 connector—ideal for weld inspection and flaw detection.

Olympus AM4R-20X22-70 is a 4 MHz, 20x22 mm angle beam shear wave ultrasonic probe (Atlas Series) with a 70° angle in steel and right angle LEMO 1 connector—designed for high-resolution weld inspection and flaw detection.

Technisonic DFP-0504-GP is a dual element, fingertip ultrasonic probe with a 5 MHz frequency and 0.50" diameter designed for general purpose use. Features integral cable and BNC connector for reliable NDT testing.

GE Inspections Phased Array Probe: Compact, high-performance probe for accurate weld, pipe, and turbine inspections. Reliable, durable, and versatile for diverse applications.

Milltronics LR-21FM Ultrasonic Transducer delivers 21 kHz ultrasonic measurement capability with 3W output for reliable signal transmission across 5-meter applications.

Olympus AM1R-20X22-60 is a 2 MHz, 20x22 mm angle beam shear wave ultrasonic probe (Atlas Series) with a 60° angle in steel and right angle LEMO 1 connector—ideal for weld inspection and flaw detection.

The Sonatest PSLM1025 is a high damped 2.25 MHz, 1" diameter single compression contact transducer designed for accurate flaw detection in composites, ceramics, and fine-grain materials. Compatible with major NDT systems. Request a quote today.

Olympus AM4R-20X22-45 is a 4 MHz, 20x22 mm angle beam shear wave ultrasonic probe (Atlas Series) with a 45° angle in steel and right angle LEMO 1 connector—high-resolution weld inspection and flaw detection capability.

Olympus AM1R-20X22-70 is a 1 MHz, 20x22 mm angle beam shear wave ultrasonic probe (Atlas Series) with a 70° angle in steel and right angle LEMO 1 connector—ideal for deep-penetration weld inspection and flaw detection.

Used Sonatest MB4TLF, 4 MHz twin crystal compression probe for flaw detection in castings and thickness surveys. Compatible with Sonatest Wave, Sitescan D-50, Masterscan D-70. Order from Cartoli or call 1-833-322-7865.

The Sonatest PSLF5025 is a 2.25 MHz, ½" medium damped ultrasonic contact transducer with a soft polymer face for accurate flaw detection on castings, forgings, and high-temp components. Ideal for rough surfaces. Request a quote or contact us to learn more.

Olympus AM2R-20X22-70 is a 2 MHz, 20x22 mm angle beam shear wave ultrasonic probe (Atlas Series) with a 70° angle in steel and right angle LEMO 1 connector—ideal for weld and flaw inspection in heavy industry.

Used Waygate Technologies Gamma 2.25/50 0.50" straight beam ultrasonic transducer operating at 2.25 MHz. Medium pulse and bandwidth for general purpose flaw detection and material inspection, suitable for plates, forgings, pipes, and castings.

Certified pre-owned Sonatest PFC2550LP 5 MHz 1/4" low profile fingertip compression wave transducer—highly damped for exceptional near-surface flaw detection in restricted-access applications. Compatible with Sonatest Sitescan D-10, Prisma, Veo+, and Masterscan flaw detectors.

Used Sonatest PSS75752 2.25 MHz 3/4" x 3/4" single crystal shear wave angle beam ultrasonic transducer with BNC connector. Designed for weld and flaw inspection in metals. High sensitivity, wide bandwidth. Fully tested and certified for NDT reliability

Certified pre-owned Sonatest PFC2510 10 MHz 1/4" fingertip compression wave transducer—highly damped for exceptional near-surface flaw resolution in tight-access applications. Compatible with Sonatest Sitescan D-10, Prisma, Veo+, and Masterscan flaw detectors.

Certified pre-owned Sonatest T1-37W0D 1 MHz 37 mm twin compression membrane transducer with Microdot connector. Delivers wide coverage and deep penetration for flaw detection and corrosion mapping.

Certified pre-owned Sonatest DK718RM, 7.5 MHz 1/8" dual element ultrasonic transducer—features a right-angle Microdot connector for tight access and reliable coupling. Optimized for thin-wall and small-diameter component inspection. Compatible with major Sonatest flaw detectors.

Used Sonatest PFC7525, 7.5 MHz 1/4" fingertip compression wave transducer for thin section flaw detection and precision thickness surveys on metals and castings. Compatible with Sonatest Wave, Sitescan D-50, Masterscan D-70. Order from Cartoli or call 1-833-322-7865.

Olympus AM4R-20X22-60 is a 4 MHz, 20x22 mm angle beam shear wave ultrasonic probe (Atlas Series) with a 60° angle in steel and right angle LEMO 1 connector. Designed for high-resolution weld inspection and flaw detection in demanding NDT applications.

Certified pre-owned Sonatest T1-25.4T426D 1 MHz 25.4 mm twin compression membrane transducer with top exit Microdot. Ideal for high-penetration flaw detection and corrosion mapping.

Used Sonatest SSG50502 shear wave angle beam ultrasonic transducer with 2.25 MHz frequency and 0.50" crystal diameter. Features a BNC connector and is designed for high-accuracy flaw detection. Tested and certified for immediate deployment.