Search results for: 'connectors with or to'

Certified pre-owned Sonatest FCR5025 2.25 MHz fingertip contact compression wave ultrasonic transducer, ideal for high-precision NDT flaw detection. Compatible with most major ultrasonic testing devices.

Certified pre-owned Sonatest RB2050, 5 MHz 1/4" slimline rubber ball delay line ultrasonic transducer—features a rubber contact tip for excellent flaw detection and thickness inspection of contoured or coarse surfaces. Compatible with Sonatest Sitescan, Prisma, Veo+, and Masterscan flaw detectors.

Used Sonatest PSLF5050, 2.25 MHz, 1" soft face, medium damped ultrasonic contact transducer for flaw detection in castings and rough surfaces. Use with couplants, wedges, or flaw detectors. Contact us or request a quote for reliable used NDT equipment.

Used Waygate Technologies Gamma 2.25/50 0.50" straight beam ultrasonic transducer operating at 2.25 MHz. Medium pulse and bandwidth for general purpose flaw detection and material inspection, suitable for plates, forgings, pipes, and castings.

Certified pre-owned Sonatest DK718RM, 7.5 MHz 1/8" dual element ultrasonic transducer—features a right-angle Microdot connector for tight access and reliable coupling. Optimized for thin-wall and small-diameter component inspection. Compatible with major Sonatest flaw detectors.

Certified pre-owned Sonatest FCG2550 5 MHz 1/4" fingertip compression wave transducer with Microdot connector—ideal for high-resolution flaw detection and thickness measurement in restricted access areas. Compatible with Sonatest Sitescan D-10, Prisma, Veo+, and Masterscan flaw detectors.

Certified pre-owned Sonatest RDT1250 5 MHz 1/8" delay line compression wave ultrasonic transducer—high resolution with Microdot connector for ultra-precise flaw detection and thin-section inspection. Compatible with Sonatest Sitescan, Prisma, Veo+, and Masterscan flaw detectors.

Certified pre-owned Technisonic CF-0204-GP, 2.25 MHz, 1/2" general purpose fingertip contact transducer—Microdot connector, perfect for flaw detection and thickness measurement in challenging or restricted areas. Compatible with major industry flaw detectors and gauges

Certified pre-owned Sonatest PE-5.0M22E0.8P-35W0D 5 MHz 22-element 0.8 mm pitch linear phased array ultrasonic probe with 35 mm wedge and Microdot connector. Versatile, high-precision phased array for welds, pipes, and heavy industry NDT.

Certified pre-owned Sonatest T1-37W0D 1 MHz 37 mm twin compression membrane transducer with Microdot connector. Delivers wide coverage and deep penetration for flaw detection and corrosion mapping.

Olympus AM1R-20X22-70 is a 1 MHz, 20x22 mm angle beam shear wave ultrasonic probe (Atlas Series) with a 70° angle in steel and right angle LEMO 1 connector—ideal for deep-penetration weld inspection and flaw detection.

Certified pre-owned Sonatest PFC2550LP 5 MHz 1/4" low profile fingertip compression wave transducer—highly damped for exceptional near-surface flaw detection in restricted-access applications. Compatible with Sonatest Sitescan D-10, Prisma, Veo+, and Masterscan flaw detectors.

Certified pre-owned Sonatest T1-25.4T426D 1 MHz 25.4 mm twin compression membrane transducer with top exit Microdot. Ideal for high-penetration flaw detection and corrosion mapping.

Certified pre-owned Sonatest T1-35W0D 1 MHz 35 mm twin compression membrane transducer with Microdot connector—ideal for high-penetration flaw and corrosion detection in castings, forgings, and composite parts.

Certified pre-owned Sonatest PFC3725, 2.25 MHz 3/8" highly damped fingertip compression wave transducer—precision flaw detection and thickness measurement for confined or limited-access areas. Compatible with Sonatest Sitescan, Prisma, Veo+, and Masterscan flaw detectors.

Certified pre-owned Sonatest T1-25.4T89D 1 MHz 25.4 mm twin compression membrane ultrasonic transducer, top exit Microdot connector—deep penetration and wide area coverage for flaw detection and corrosion mapping.

Olympus AM2R-20X22-60 is a 2 MHz, 20x22 mm angle beam shear wave ultrasonic probe (Atlas Series) with a 60° angle in steel and right angle LEMO 1 connector—ideal for weld inspection and flaw detection.

Used Sonatest FCG5025 2.25 MHz fingertip compression wave ultrasonic transducer with a 0.50" crystal diameter and side connector. Medium bandwidth for reliable flaw detection in castings, forgings, and thickness measurements. Fully tested and certified.

Used Sonatest SSG50502 shear wave angle beam ultrasonic transducer with 2.25 MHz frequency and 0.50" crystal diameter. Features a BNC connector and is designed for high-accuracy flaw detection. Tested and certified for immediate deployment.

Certified pre-owned Sonatest T1-24.4T0D 1 MHz 24.4 mm twin compression membrane transducer with top exit Microdot connector. Delivers wide-area coverage and deep penetration for flaw detection and corrosion mapping in tough industrial environments.

Used Sonatest QCG5025 2.25 MHz shear wave angle beam ultrasonic transducer with 0.50" crystal diameter and Microdot quick change connector. Designed for precision flaw detection in welds and structural components. Fully tested and certified for immediate deployment.

Olympus AM4R-20X22-70 is a 4 MHz, 20x22 mm angle beam shear wave ultrasonic probe (Atlas Series) with a 70° angle in steel and right angle LEMO 1 connector—designed for high-resolution weld inspection and flaw detection.