Search results for: 'designed integrates'

Technisonic DFP-0504-GP is a dual element, fingertip ultrasonic probe with a 5 MHz frequency and 0.50" diameter designed for general purpose use. Features integral cable and BNC connector for reliable NDT testing.

Milltronics LR-21FM Ultrasonic Transducer delivers 21 kHz ultrasonic measurement capability with 3W output for reliable signal transmission across 5-meter applications.

Olympus AM4R-20X22-60 is a 4 MHz, 20x22 mm angle beam shear wave ultrasonic probe (Atlas Series) with a 60° angle in steel and right angle LEMO 1 connector. Designed for high-resolution weld inspection and flaw detection in demanding NDT applications.

Olympus AM4R-20X22-45 is a 4 MHz, 20x22 mm angle beam shear wave ultrasonic probe (Atlas Series) with a 45° angle in steel and right angle LEMO 1 connector—high-resolution weld inspection and flaw detection capability.

Olympus AM4R-20X22-70 is a 4 MHz, 20x22 mm angle beam shear wave ultrasonic probe (Atlas Series) with a 70° angle in steel and right angle LEMO 1 connector—designed for high-resolution weld inspection and flaw detection.

Olympus AM1R-20X22-60 is a 2 MHz, 20x22 mm angle beam shear wave ultrasonic probe (Atlas Series) with a 60° angle in steel and right angle LEMO 1 connector—ideal for weld inspection and flaw detection.

Certified pre-owned Sonatest MAP252545T phased array mapping ultrasonic probe—estimated 2.5–5 MHz frequency range, 25 mm aperture, top exit configuration. Delivers rapid area mapping for corrosion, weld, or composite inspection. Compatible with Sonatest Veo3, Prisma, and mapping scanners.

Used Sonatest SSG50502 shear wave angle beam ultrasonic transducer with 2.25 MHz frequency and 0.50" crystal diameter. Features a BNC connector and is designed for high-accuracy flaw detection. Tested and certified for immediate deployment.

Olympus HI-6780 dual-element ultrasonic immersion transducer for reliable NDT flaw detection, compatible with pitch-catch systems and 1 MHz immersion testing.

Used Sonatest FCG5025 2.25 MHz fingertip compression wave ultrasonic transducer with a 0.50" crystal diameter and side connector. Medium bandwidth for reliable flaw detection in castings, forgings, and thickness measurements. Fully tested and certified.

Certified pre-owned Sonatest PE-5.0M32E0.8P 5 MHz 32-element 0.8 mm pitch linear phased array ultrasonic probe. Delivers high-resolution imaging and dependable flaw detection for welds, pipelines, composites, and pressure vessels.

Used Sonatest PMAP505045, 5 MHz 0.5" 45° angle beam probe for weld inspection and flaw detection. Compatible with Sonatest Wave, Sitescan D-50, Masterscan D-70. Order from Cartoli or call 1-833-322-7865.

The Sonatest PSLM1025 is a high damped 2.25 MHz, 1" diameter single compression contact transducer designed for accurate flaw detection in composites, ceramics, and fine-grain materials. Compatible with major NDT systems. Request a quote today.

Certified pre-owned Sonatest T1-25.4T89D 1 MHz 25.4 mm twin compression membrane ultrasonic transducer, top exit Microdot connector—deep penetration and wide area coverage for flaw detection and corrosion mapping.

Certified pre-owned Sonatest QCG2525 2.25 MHz 1/4" single crystal angle beam shear wave quick change ultrasonic transducer with Microdot connector. Designed for weld, forging, and pipe flaw inspection. Compatible with Sonatest and other flaw detectors.

Certified pre-owned Sonatest T1-35W0D 1 MHz 35 mm twin compression membrane transducer with Microdot connector—ideal for high-penetration flaw and corrosion detection in castings, forgings, and composite parts.

Used Sonatest PDED50505, 5 MHz 1/2" twin element compression wave ultrasonic transducer for reliable flaw detection and thickness gauging on corroded or coated materials. Compatible with Sonatest Wave, Sitescan D-50, Masterscan D-70. Order from Cartoli or call 1-833-322-7865.

Used Sonatest PMAP3737445T, 5 MHz 0.375" 45° angle beam probe for weld inspection, flaw detection, and code-compliant NDT. Compatible with Sonatest Wave, Sitescan D-50, Masterscan D-70. Buy from Cartoli or call 1-833-322-7865.

Used Waygate Technologies Gamma 5.0/50 5.0 MHz 0.50" straight beam ultrasonic transducer featuring a side-mounted Microdot connector. Designed for precise flaw detection and material inspection on thick plates, forgings, and castings. Fully tested and certified for reliable NDT performance.

Used Sonatest PIM5025, 2.25 MHz, 0.5" immersion ultrasonic transducer for flaw detection andprecision NDT in composites, metals, and ceramics. Compatible with Sonatest Wave, Sitescan D-50, Masterscan D-70, and Prisma. Order from Cartoli or call 1-833-322-7865.

Certified pre-owned Sonatest FCG5050 5 MHz fingertip contact compression wave transducer with Microdot connector—designed for precision flaw detection in castings, forgings, and thickness surveys. Compatible with popular Sonatest flaw detectors.

The Sonatest SLM1050 is a 5 MHz, 1" medium damped ultrasonic transducer for reliable NDT flaw detection and thickness measurement. Ideal for use on composites and metals. Compatible with Sitescan, Wave, and more. Shop now for proven performance.