Search results for: 'instalación'

Introducing the OWON ODP6033: Precision Power for Your Demanding Applications.

Siemens SITOP select diagnosis module 6EP1961-2BA00 for 24 V DC systems. 4-channel electronic module (4x 10 A) that distributes and monitors load current with adjustable trip thresholds from 2–10 A. Supports selective channel shutdown on overload/short circuit with common signaling contact.

The Graco 120013 Proportional V/P Valve is a genuine OEM replacement component used in Graco automatic proportioning systems. It provides proportional pressure control within Flow Control Modules such as Model 249849 and 24H989, enabling regulated material flow in industrial applications.

The Conair UTB-120S Universal Terminal Box is a centralized electrical connection point used in material loading systems. It operates on 120 VAC and is designed to interface a main loader control panel with multiple receiver or loader drop cables, simplifying system wiring and maintenance.

The Honeywell 30731808-001 Regulator Card is a power regulation module used in Honeywell industrial control systems. It converts a +24 VDC backplane input into regulated +5 VDC, +12 VDC, and −12 VDC outputs to support system modules within compatible control chassis.

The General Electric 8G163WF is a fluorescent lamp ballast labeled for 277-volt operation and F48CW lamp applications. This unit is identified directly from manufacturer carton labeling and is supplied as a single ballast. No additional accessories or documentation are included.

Macro Sensors LVC-2500 Low Voltage Conditioner delivers DIN-rail LVDT and half-bridge signal conditioning with selectable 3 kHz, 5 kHz, or 10 kHz excitation, adjustable gain and offset, voltage and current outputs, and link-selectable analog math functions.

Magnetek 1030-14RA autotransformer delivers constant wattage autotransformer (CWA) regulation for 100W high-pressure sodium lamp systems operating at 277V, supporting stable lamp operation and controlled electrical output.

Phoenix Contact 5604123 is a VARIOFACE passive module providing 16-channel fused output for structured signal interfacing between control systems and field wiring.

Topaz Lighting LU100/MOG-37 high pressure sodium lamp delivers 100W output with clear ED23.5 construction and mogul base, providing consistent 9,500 lumen illumination and extended 24,000-hour service life for commercial lighting applications.

The Potter & Brumfield KHAU-17D11-24 is a general-purpose industrial plug-in relay with a 24 VDC coil and 4 Form C contact arrangement. Designed for socket mounting, it supports control and power switching applications requiring multiple changeover contacts.

Phoenix Contact UT 6-HESILA fuse modular terminal block designed for 6.3 x 32 mm glass or ceramic fuses. Rated at 250 V and 10 A, this DIN-rail mount terminal block uses a screw connection method and includes an integrated LED fault indicator for fuse status monitoring. Supplied as a quantity of 10 units.

The Turck U-56934 is a Mini-Fast double-ended industrial sensor cordset designed for actuator and sensor connections in industrial automation environments. It features a straight male and right-angle female 7/8"-16 connector configuration, a 0.3 m cable length, and a yellow high-flex jacket.

Hubbell HBL2431 delivers a compact locking plug format for 20A, 3-phase 480VAC connections with 3-pole, 4-wire grounding configuration.

RP Lighting + Fans REL21 LED Emergency Light delivers reliable dual-head illumination for emergency egress lighting with 120/277V operation, thermoplastic housing, and optical lens coverage for open areas or pathways.

Siemens Furnas E62 thermal overload heater element delivers thermal overcurrent protection for use with thermal overload relays, magnetic motor starters, and motor control applications.

The Siemens TA2J6500 is an aluminum body 2-barrel lug accessory for use with 2- or 3-pole 200A–400A JD and LD frame molded case circuit breakers. It supports copper conductors from 3/0 AWG to 500 kcmil and aluminum conductors from 4/0 AWG to 500 kcmil, and is suitable for both line and load side connections.

Schneider Electric CAD50G7 is a TeSys Deca control relay with five normally open contacts and a 120 VAC 50/60 Hz control coil. Rated up to 690 VAC and 10 A, it supports DIN rail or panel mounting and is designed for industrial control circuit applications.

The Hammond Power CRX06D1BC is a three-phase iron core line reactor rated for 600 VAC and 6.1 A. Part of the HPS Centurion® R Series, it provides controlled impedance to mitigate harmonics and electrical transients in AC drive systems operating at 50/60 Hz.

The Advance L-220-F is a magnetic reactor ballast designed to operate two 15W or 20W preheat fluorescent lamps at 120V AC, 60 Hz. It regulates lamp current using an inductive core and requires external starters for lamp ignition in preheat fluorescent systems.

The Allen-Bradley 1492-SP1C250 is a single-pole, 25 A supplementary circuit breaker with a Type C tripping characteristic. Designed for DIN rail mounting, it provides thermal-magnetic overcurrent protection for commercial and light industrial control circuits operating with inductive loads.

The Siemens 5SJ4210-7HG42 is a 2-pole miniature circuit breaker from the 5SJ4 Series, rated at 10 A and up to 277 V. It provides thermal-magnetic overcurrent protection for branch circuit and feeder applications and is designed for standard 35 mm DIN rail mounting.