Search results for: 'systemd'

The Allen-Bradley 800B-N5W is a white LED lamp designed for use with Bulletin 800B 16 mm illuminated push-button and pilot light operators. Rated for 120V AC operation, this LED bulb provides consistent white illumination with low power consumption and extended service life in industrial control panel applications.

Phoenix Contact UT 6-HESILA fuse modular terminal block designed for 6.3 x 32 mm glass or ceramic fuses. Rated at 250 V and 10 A, this DIN-rail mount terminal block uses a screw connection method and includes an integrated LED fault indicator for fuse status monitoring. Supplied as a quantity of 10 units.

The Turck U-56934 is a Mini-Fast double-ended industrial sensor cordset designed for actuator and sensor connections in industrial automation environments. It features a straight male and right-angle female 7/8"-16 connector configuration, a 0.3 m cable length, and a yellow high-flex jacket.

The Fisher R3570CX0022 is a pneumatic valve positioner repair kit intended for maintenance of Fisher 3570 Series pneumatic valve positioners. This kit supports servicing of positioners used in industrial control valve assemblies and is not a complete valve or positioner.

The Sprecher + Schuh D5-3T12 is a transformer element for D5 series 22 mm pilot devices. It converts a 480 V control voltage to a 6 V output for powering an incandescent lamp, allowing low-voltage lamp operation in high-voltage industrial control panels.

Thomas & Betts 17220-BD copper compression terminal lugs are designed for 3/0 AWG copper conductors and 3/8 inch studs. Manufactured from tin-plated copper, these orange Color-Keyed lugs support verified crimping with compatible dies and tools. Quantity of 10 lugs per package.

Lake Shore RIMF2V1 frequency-to-voltage converter brings encoder signal conversion into a compact control module with selectable V/RPM and PPR settings, 0/4-20 mA output, ±10V output, ±300V output, and relay output.

REES 50702-000 delivers heavy-duty SPST-NC contact control for REES push button operators and selector switches, with screw terminals and gold-plated contacts for dependable circuit switching.

Hubbell HBL2431 delivers a compact locking plug format for 20A, 3-phase 480VAC connections with 3-pole, 4-wire grounding configuration.

Siemens 75D70550004 magnetic coil supports D.P. Model F contactor replacement with dual-voltage operation at 380–440V 50 Hz and 440–480V 60 Hz.

Moore Industries RBX/3W80-160/4-20MA/12-42DC-EZ100[HP] resistance bulb transmitter with 3-wire RTD input, 4-20mA output, 12-42VDC loop power, and front Zero/Span adjustment.

The Siemens TA2J6500 is an aluminum body 2-barrel lug accessory for use with 2- or 3-pole 200A–400A JD and LD frame molded case circuit breakers. It supports copper conductors from 3/0 AWG to 500 kcmil and aluminum conductors from 4/0 AWG to 500 kcmil, and is suitable for both line and load side connections.

Schneider Electric CAD50G7 is a TeSys Deca control relay with five normally open contacts and a 120 VAC 50/60 Hz control coil. Rated up to 690 VAC and 10 A, it supports DIN rail or panel mounting and is designed for industrial control circuit applications.

The Telemecanique GV2-AE11 is a front-mounted auxiliary contact block with 1 normally open and 1 normally closed contact. Designed for TeSys GV2 and GV3 motor circuit breakers, it provides status signaling and control feedback using screw clamp terminals.

The Eaton H2006B-3 is a Freedom NEMA heater coil set designed for thermal overload protection in motor control applications. This Class 20 standard trip heater pack supports selectable full load current settings from 1.79A to 2.9A via dial positions A–D and is supplied as a factory-calibrated set of three elements.

The Murr Elektronik 23050 is a three-phase RC motor suppressor designed to reduce induced voltage peaks in AC motor applications. Rated for up to 575 VAC at 50/60 Hz and 4 kW engine power, it supports star-connected RC suppression and installation close to the interference source.

The Allen-Bradley 1492-SP1C250 is a single-pole, 25 A supplementary circuit breaker with a Type C tripping characteristic. Designed for DIN rail mounting, it provides thermal-magnetic overcurrent protection for commercial and light industrial control circuits operating with inductive loads.

The Universal 827-SLH-TC-P is a magnetic instant-start fluorescent ballast designed to operate two slimline lamps on a 277V, 60 Hz power supply. It supports series lamp operation and is intended for replacement use in compatible commercial and industrial lighting fixtures.

The Allen-Bradley 800B-EAB is a 16 mm maintained square push button operator designed for light industrial and instrumentation applications. It features corrosion-proof plastic construction and gold-plated snap-action contact compatibility for reliable low-voltage switching when paired with Bulletin 800B contact blocks.

The Turck B8241-0/PG9 is a field-wireable M12 right-angle, 4-position female connector designed for sensor and actuator wiring in industrial automation. It uses a screw terminal connection, supports 250 V at 4 A, and accepts PG9 cable glands for secure, sealed installations.

GE THQL32020 Q-Line breaker delivers reliable thermal-magnetic protection with quick-make/quick-break action and 3-pole 20A design for GE load centers.

The HP A4978-62025 is an LCD and power switch subassembly mounted in a molded plastic bracket. The assembly integrates a monochrome LCD display and a front-panel power switch with a fixed ribbon cable terminating in a D-sub style connector. Identified by assembly label A4978-62025.

The Eaton E22HL3X4 is a 22.5 mm non-metallic heavy-duty assembled indicating light designed for panel mounting. It features a green LED operating at 24 VAC/VDC full voltage and uses a non-relampable cluster style construction. Rated for NEMA 3, 3R, 4, 4X, 12, and 13 environments.