Search results for: 'rated stock'

The WAGO 249-117 is a gray, screwless end stop designed to secure DIN-35 rail-mounted terminal blocks. It snaps onto TS 35 x 7.5 mm or 35 x 15 mm rails without tools. Constructed from PA66 polyamide with UL94 V0 flammability rating, it provides stable positioning and electrical insulation.

Tri-Mag Super 6250T2 power supply delivers regulated multi-voltage DC output including +5V, ±12V rails with up to 250 watts capacity for system power distribution and integration applications.

ABB 1SVR427032R0000 switch mode power supply delivers 24 VDC output at 2.5 A from a 100–240 VAC input, with adjustable output voltage from 24–28 VDC and 60 W max load capacity for control and industrial power applications.

The General Electric CR104PLT43 is a 30.5mm push-to-test indicator light designed for 240V AC industrial automation systems. Part of the GE CR104P series, it utilizes a resistor power supply and supports machine-tool and control panel applications where manual lamp verification is required.

The Universal 447-LR-TC-P is a 120V magnetic fluorescent ballast designed to operate two lamps in trigger-start configurations. It supports F20T12, F15T8, and F15T12 lamps and features a low power factor, lag-type circuit. UL and CSA certifications support indoor and Type 1 outdoor use.

The Phoenix Contact RAD-OUT-8D-REL is an 8-channel digital relay output extension module for Radioline wireless systems. It provides floating relay contacts for reliable signal switching and supports DIN rail mounting in industrial automation environments.

The Square D 8501NR61 is an 11-pin plug-in relay socket designed for use with compatible Square D relays and timers. It features single-tier screw clamp terminals and supports both panel and DIN rail mounting for industrial control applications.

SCHMERSAL SRB301LCI-24V: Reliable 24V safety controller relay with 3 safety contacts, signaling output, and advanced diagnostics for industrial protection.

Hubbell 0740-113-33 delivers straight liquidtight cord-grip strain relief for insulated cables, combining stainless steel mesh, nylon body construction, and a neoprene bushing for dependable cable management.

SOR 4N3-KK4-N1-C1A-ZZ pressure switch delivers adjustable 2-25 PSI switching for industrial pressure control, with 750 PSI over range and 1000 PSI proof pressure for monitored process applications.

Siemens 3RP1505-1BQ30 SIRIUS timing relay with multi-function operation, 2 changeover contacts, 15 time setting ranges, LED indication, and screw-type terminals.

The Contrex M-Drive 4E is a digital DC motor drive and motion controller designed for closed-loop speed regulation of permanent magnet DC motors up to 2 HP. It supports dual AC input voltage, selectable DC output, serial communication, and integrated operator interface.

The Allen-Bradley 800B-PS11 is a 16 mm snap-action contact block with one normally open and one normally closed contact. Designed for Bulletin 800B push button and selector switch operators, it supports reliable low-voltage switching and compact panel installations in light industrial and instrumentation applications.

The ABB 1SVR427014R0000 CP-S 24/5.0 is a 120 W DIN rail switch mode power supply delivering 24 V DC at 5 A. Designed for industrial environments, it supports wide AC and DC input ranges, adjustable output voltage, high efficiency, and integrated protection features for reliable system power.

Phoenix Contact 2832771-HW16 FL Switch SF 8TX delivers reliable 8-port 10/100 Mbps industrial Ethernet expansion with plug-and-play setup and DIN-rail mounting.

Emerson Ovation 1C31189G31 Speed Detector Module for the Ovation DCS. This module monitors rotating equipment speed and converts sensor input into digital data for real-time control, monitoring, and diagnostics.

The TRACO POWER TSP 090-124 is a 90W DIN-rail mounted industrial power supply providing a regulated 24VDC output at up to 3.75A. Designed for factory and control panel environments, it features universal 85–264VAC input, convection cooling, adjustable output voltage, DC-OK signaling, and integrated protection functions.

SolaHD SCP100S24X-CM delivers regulated 24VDC power for harsh environments, combining IP67 protection, universal AC/DC input, and Class 2 output in a compact chassis-mount industrial power supply.

AEMC AX503 Triple Output DC Power Supply comes with 30V, 2.5A outputs and 5V blind output, master-slave tracking, and LED display. Ideal for labs and testing.

Phoenix Contact PLC-BSC-24DC/1/ACT relay base for PLC-INTERFACE output functions with screw connection, 24 V DC input, 1 N/O contact, and load return line connection.

Honeywell GLFA33A2B is a MICRO SWITCH GLA Series industrial limit switch designed to EN50041 standards with 30 mm x 60 mm mounting. This configuration features a side rotary adjustable lever with steel roller, slow action break-before-make (BBM) 1NC/1NO contact arrangement, gold-plated contacts for low-energy applications, and an integrated yellow LED pilot light.

Eaton FA20 auxiliary contact block adds 2NO contacts to XTMCX contactors and XTRM relays, offering reliable control signaling and easy front-mount installation.

Allen-Bradley 100-D-S1-11 auxiliary contact block adds 1NO/1NC control contacts to 100-D series contactors, offering reliable screw-terminal expansion for industrial panels.