Search results for: 'control for'

The WAGO 249-117 is a gray, screwless end stop designed to secure DIN-35 rail-mounted terminal blocks. It snaps onto TS 35 x 7.5 mm or 35 x 15 mm rails without tools. Constructed from PA66 polyamide with UL94 V0 flammability rating, it provides stable positioning and electrical insulation.

Mersen A050F300 Protistor semiconductor fuse delivers ultra-fast aR protection at 500V and 300A, designed to limit let-through energy and protect sensitive power electronics in high-performance drive and converter systems.

Allen-Bradley 1489-M D25A miniature circuit breaker delivers 3-pole, 25A D-curve thermal-magnetic protection for industrial branch circuits with high inrush current demands.

The Universal 447-LR-TC-P is a 120V magnetic fluorescent ballast designed to operate two lamps in trigger-start configurations. It supports F20T12, F15T8, and F15T12 lamps and features a low power factor, lag-type circuit. UL and CSA certifications support indoor and Type 1 outdoor use.

Tri-Mag Super 6250T2 power supply delivers regulated multi-voltage DC output including +5V, ±12V rails with up to 250 watts capacity for system power distribution and integration applications.

The Edwards Signaling 48XBRMG120A is a green LED visual signal light designed for indoor and outdoor industrial applications. Operating on 120 VAC, this dual-mode beacon supports steady-on or flashing operation and is housed in a corrosion-resistant NEMA 4X enclosure.

Hubbell 0740-113-33 delivers straight liquidtight cord-grip strain relief for insulated cables, combining stainless steel mesh, nylon body construction, and a neoprene bushing for dependable cable management.

The Allen-Bradley 2198-K57CK-D15M is a universal feedback connector kit for Kinetix 5700 drives. It provides wire terminations for encoder signals when using Allen-Bradley 2090-Series motor feedback cables and connects to the drive’s universal feedback (UFB) port.

Mersen / Ferraz Shawmut A155F2D0R0-125E is a 15.5 kV, 125E medium-voltage, E-rated Amp-Trap® CS-3 series ferrule-mounted fuse. Designed for transformer and distribution protection, it provides current-limiting performance with visual blown-fuse indication and compatibility with standard spring-reinforced clips.

The Fluke CV300 is a 75 mm ClirVu® infrared window with a hand turn door latch, designed to improve electrical inspection safety. It enables thermal inspections without opening energized panels and supports fast single-hole installation while maintaining enclosure ratings.

GAI-Tronics 7335-001 is a 5 party line weatherproof non-metallic enclosure built for analog Page/Party intercom systems, combining NEMA 4X outdoor protection, 120 VAC input, and reinforced polyester fiberglass construction for demanding installations.

Forney 312 High Energy Spark Igniter delivers Class 3 direct spark ignition for oil or gas igniters and small burners with 12 joules per spark, 2000 VDC output, and approximately 3 sparks per second.

The Marlin 1200-J delivers a high-temp Type J male connector for reliable thermocouple connections, using glass-filled thermoset construction for extreme heat performance.

The Eaton P1-25/V/SVB is a 25 A, three-pole main switch from the Eaton Moeller® P1 series designed for rear mounting applications. It features a door-coupling rotary drive with a red rotary handle and yellow locking ring, and supports emergency switching off functionality. The switch is rated up to 690 V AC, provides IP65 front protection, and is lockable in the 0 (Off) position for secured isolation.

Helwig Carbon H704 high-speed turbine carbon brush is built for turbo generator service, delivering low-friction electrical contact, balanced current distribution, and dependable performance at peripheral speeds up to 180 mph.

SOR 101RN-KK45-M4-C1A differential pressure switch with 10-75 PSID adjustable range, RN weathertight aluminum housing, KK DPDT switching element, M4 diaphragm and O-ring system, and C1A 1/4 in NPT(F) pressure port.

SolaHD SCP100S24X-CM delivers regulated 24VDC power for harsh environments, combining IP67 protection, universal AC/DC input, and Class 2 output in a compact chassis-mount industrial power supply.

Allen-Bradley PHOTOSWITCH Series 9000 transmitted beam receiver sensor (42GRR-9003-QD, Series A) with 70–264V AC/DC operation, isolated N.O. solid-state (MOSFET) output, 4-pin AC Micro quick-disconnect, and IR 880 nm optics.

Eaton WMZH3D16T provides reliable 16A D-curve UL 489 protection for high-inrush industrial circuits, offering secure DIN-rail installation and robust performance.

Moore Industries DPS/24DC/1200MA/117AC [DIN] DIN power supply with 24VDC output, 1200mA output current, 117AC input, isolated output, and DIN rail-mount housing.

Honeywell GLFA33A2B is a MICRO SWITCH GLA Series industrial limit switch designed to EN50041 standards with 30 mm x 60 mm mounting. This configuration features a side rotary adjustable lever with steel roller, slow action break-before-make (BBM) 1NC/1NO contact arrangement, gold-plated contacts for low-energy applications, and an integrated yellow LED pilot light.

Bussmann BPM275UL is a plug-in DIN rail surge protection module for 275 V systems, delivering 40 kA maximum surge current, 20 kA nominal discharge current, and local status indication for panel protection applications.

Hubbell HBL26420 Hubbellock industrial receptacle rated 60A 600V AC, 3-pole 4-wire grounding, screw terminals, cast aluminum long housing.