Search results for: 'forow'

Mersen USCC3I Y218038 fuse holder offers safe 3-pole Class CC protection with LED indication, DIN-rail mounting, and reliable 600V performance for control circuits.

The Mitsubishi CP30-BA 1-Pole 5A M-Curve Circuit Protector is a compact DIN-rail-mounted supplementary protector designed for low-capacity control circuits. It features a medium-speed hydraulic-magnetic tripping characteristic, 5 A current rating, and supports AC 250 V or DC 65 V operation in industrial control panels.

The General Electric TEY120 is a 1-pole, 20-amp molded case circuit breaker designed for 277 VAC systems. It features a bolt-on mounting style, thermal magnetic protection, and LI trip functions. Rated at 14 kAIC at 277 V, it is commonly used in commercial and industrial lighting panel applications.

The Deltron ST150-1XX is a 150 W industrial AC-DC switching power supply with three DC outputs. It provides one 5 V output rated at 20 A and two 12 V outputs rated at 5 A each. Designed for terminal block wiring, it supports dual-range AC input and is used in control and automation systems.

The Siemens 3TF3000-0A is a 3-pole AC contactor from the 3TF30 series rated 9 A (AC-3 at 380/400 V) with insulation voltage up to 690 V. Designed for motor control applications at 50/60 Hz, it complies with IEC 947 and VDE 0660 standards.

The Potter & Brumfield KUP14D15 is an enclosed electromechanical control relay with a 12 VDC coil and a 3PDT (3 Form C) contact configuration. This relay features an 11-pin blade terminal base and a clear polycarbonate dust cover for component visibility.

The Allen-Bradley 700-HK32Z24 offers reliable DPDT switching in a slim 24V DC plug-in relay design, ideal for high-density control panels and industrial automation.

Allen-Bradley 193-BSB30 thermal overload relay delivers adjustable 2.0–3.0 A motor protection with Class 10 operation, manual or auto reset selection, and direct-mount Bulletin 193 form factor control.

Moore Industries DPS/24DC/240MA/117AC/-FA(DIN) is a compact DIN rail power supply delivering 24 VDC at 240 mA from 117 VAC input, with adjustable voltage, current limit control, and output status indication.

Minebea NMB-MAT 4715KL-05T-B40 is a 24V DC axial cooling fan with 119 x 119 x 38.4 mm dimensions, 3200 RPM speed, and approximately 118 CFM airflow for industrial equipment cooling.

The Siemens 3TX4422-0A SIRIUS auxiliary contact block features 2NO + 2NC instantaneous contacts with screw-type terminals. Designed for use with contactor relays and power contactors according to EN 50011, it supports snap-on mounting, IP20 front protection, and positively driven operation per IEC 60947-5-1.

The Allen-Bradley 1606-XLE480EP is a 24V DC, 20A (480W) switched mode power supply from the 1606-XLE Essential series. It supports 100–240V AC input and 110–150V DC input, features adjustable 24–28V output, 20% power reserve, DC OK relay contact, and screw terminals for DIN rail industrial installation.

The Allen-Bradley AK-R2-360P500 Dynamic Brake Resistor is an external medium-duty resistor kit designed for PowerFlex 70 and 700 series drives. It provides 360 ohms of resistance with an 86 watt continuous power rating to dissipate regenerative energy during motor braking.

The MEAN WELL HRP-600-15 is a single-output enclosed AC-DC power supply delivering 15 VDC at up to 43 A. It features built-in active power factor correction, fan cooling with ON-OFF control, and protection against overload, over-voltage, and over-temperature for industrial power applications.

The Axiomatic IC-DR-13 is an analog signal converter designed to accept a standard 4–20 mA input and produce a user-selectable bipolar current output. Output range is jumper-selectable from ±10 mA to ±310 mA in 10 mA steps. The module operates from a 24 VDC nominal supply and is housed in a DIN-rail mount enclosure for industrial applications.

Amperite 115C60 thermal time delay relay delivers fixed 60-second Delay on Break control with 115V AC/DC input, SPST-NC contacts, and a 3A resistive rating.

Leviton 3433-C locking connector delivers 30A, 120/208V 3ØY grounding connectivity in a 4-pole, 4-wire non-NEMA configuration for industrial cord connection.

Eaton Cutler-Hammer C320KGS1 is a Freedom Series side-mounted auxiliary contact block with 1NO contact configuration for NEMA sizes 00 to 2 and IEC sizes A to K.

The Contrex M-Drive 4E is a digital DC motor drive and motion controller designed for closed-loop speed regulation of permanent magnet DC motors up to 2 HP. It supports dual AC input voltage, selectable DC output, serial communication, and integrated operator interface.

Allen-Bradley 1492-FB3J60-L fuse holder provides secure Class J fuse mounting for control applications, supporting reliable protection in industrial systems.

Hubbell CS320I is a commercial-specification 3-way toggle switch rated 20A at 120/277V AC. It is side wired only, supports #14 to #10 AWG copper wire, and features an ivory nylon toggle with thermoplastic construction.

Leviton CR20-I commercial-grade duplex receptacle rated 20A, 125V in NEMA 5-20R configuration. Ivory narrow-body design with side-wire termination and self-grounding clip. Qty 5.

The TRACO POWER TSP 090-124 is a 90W DIN-rail mounted industrial power supply providing a regulated 24VDC output at up to 3.75A. Designed for factory and control panel environments, it features universal 85–264VAC input, convection cooling, adjustable output voltage, DC-OK signaling, and integrated protection functions.

The Siemens 3RV2031-4UA10 SIRIUS 3RV2 motor protection circuit breaker is a size S2, 3-pole device with adjustable thermal overload protection from 32 to 40 A. Rated for operation up to 690 V with Class 10 tripping characteristics, it integrates thermal and magnetic trip functions for motor branch circuit protection.