Search results for: '2.0'

The Functional Devices RIB2401B is a 20 Amp SPDT power control relay with a continuous duty coil and multi-voltage input of 24 Vac/dc or 120 Vac, 50–60 Hz. Housed in a NEMA 1 enclosure accepted for plenum use, it includes a visible LED status indicator and 16-inch 600V rated lead wires. The relay supports general purpose, ballast, pilot duty, tungsten, and motor loads within its published ratings.

The LEMO FGL.5K.314.CYMC20 is a 5K-Series circular push-pull connector with 14 low-voltage crimp contacts and IP68 environmental sealing. Designed for harsh environments, it supports up to 18 A per contact, reverse-gender configuration, and secure push-pull locking.

Emerson KJ3222X1-BK1 is a DeltaV S-Series analog input module with 8 channels for 4-20 mA HART signals. The module is identified on manufacturer documentation as AI 8 CH 4-20mA HART CARD.

Eaton XTCEXFAC20 auxiliary contactor supports control-panel auxiliary switching with two normally open contacts and visible AC/DC ratings.

GF Signet 3-8512 flow transmitter converts compatible sensor frequency input to a 4-20 mA process signal for flow monitoring and control. Local display and keypad are built into the unit.

Weidmuller PRO MAX 480W Power Supply: High-efficiency 24V, 20A power solution for demanding automation. Reliable performance in extreme conditions with long-lasting durability.

The MAC Valves PME-501CC is a solenoid pilot valve labeled 24 VDC and 6.0 watts. The valve body marking indicates a pressure range of 20–150 PSI. The unit includes an attached hardwired cable with flying leads.

Macro Sensors LVC-2500 Low Voltage Conditioner delivers DIN-rail LVDT and half-bridge signal conditioning with selectable 3 kHz, 5 kHz, or 10 kHz excitation, adjustable gain and offset, voltage and current outputs, and link-selectable analog math functions.

The MTL IOP32D is a DIN-rail mounted surge protection device designed to protect digital and analogue I/O circuits. It provides surge protection for two independent loops (four wires) using a hybrid protection circuit rated up to 20 kA. The device is suitable for industrial control and instrumentation applications and is certified for use in hazardous areas.

Hubbell HBL2426 is a 20A, 3-phase 250V AC Insulgrip flanged receptacle with a 3-pole, 4-wire grounding configuration, backwired terminations, and nylon housing for Twist-Lock power connections.

Allen-Bradley 100-DS1-20 auxiliary contact block expands control contacts on 100-D contactors, delivering status signaling for industrial motor control.

Siemens 771-8STF1 current-to-pneumatic (I/P) transducer converts a DC mA input to a proportional pneumatic output. Configuration: 4–20 mA input, 3–27 psig output, standard output capacity, terminal strip, intrinsically safe approval.

The Eaton H2006B-3 is a Freedom NEMA heater coil set designed for thermal overload protection in motor control applications. This Class 20 standard trip heater pack supports selectable full load current settings from 1.79A to 2.9A via dial positions A–D and is supplied as a factory-calibrated set of three elements.

The Siemens Sentron ED43B020 is a 3-pole, 20 amp molded case circuit breaker rated for 480 VAC operation. It provides thermal-magnetic protection with long-time and instantaneous trip functions and is designed for use in commercial and industrial power distribution systems.

Hubbell CS320I is a commercial-specification 3-way toggle switch rated 20A at 120/277V AC. It is side wired only, supports #14 to #10 AWG copper wire, and features an ivory nylon toggle with thermoplastic construction.

General Electric THQB2120 breaker delivers reliable 20A thermal-magnetic protection for THQB panelboards, featuring bolt-on mounting and a 10kA interrupt rating.

Eaton C25BNF220A delivers reliable 20A motor switching with a 120V coil, ideal for HVAC, refrigeration, pumps, and industrial control panels.

The Weidmüller 1122-8800-00 TRZ 24VDC 1CO is a slim DIN rail relay interface module with a 24 V DC control voltage and one changeover (SPDT) contact. It supports up to 6 A switching current and uses tension-clamp connections for secure, screwless wiring in control cabinets.

Hirschmann RS20-0800T1T1SDAEHH09.0.04 is an 8-port managed Fast Ethernet switch for DIN-rail networks, delivering store-and-forward switching, redundant power support, and Layer 2 Enhanced operation in a fanless industrial form factor.

General Electric THQL2120 delivers reliable 20A, 2-pole protection for GE Q-Line load centers. Ideal for residential circuits and 240V equipment with plug-in installation.

Leviton 1257-I delivers industrial-grade SPDT momentary switching for motors, screens, and disposals with durable construction and reliable 20A performance.

Johnson Controls P10BC-7C low pressure control, SPDT, 1-stage, 3 to 20 psi range, 12 psig factory setting, 2 psi switch differential, with barbed fitting.

The Siemens B220 2-Pole breaker delivers reliable 20A thermal-magnetic protection for 120/240V systems, ideal for Siemens P1 panelboards and BL-series load centers.

ABB S201-K1 miniature circuit breaker set consisting of two single-pole 1 A MCBs from the System pro M compact S200 series. Each breaker features a K tripping characteristic and is designed for DIN-rail mounting in AC or DC electrical installations.