Search results for: '2.0 2'

General Electric THQL2120 delivers reliable 20A, 2-pole protection for GE Q-Line load centers. Ideal for residential circuits and 240V equipment with plug-in installation.

The Siemens B220 2-Pole breaker delivers reliable 20A thermal-magnetic protection for 120/240V systems, ideal for Siemens P1 panelboards and BL-series load centers.

The Leviton 2453 is a 20 Amp, 277/480 Volt AC locking connector with a NEMA L19-20R configuration. It features a 4-pole, 4-wire, non-grounding design for 3-phase WYE applications. The connector uses an impact-modified nylon body with solid brass blades and contacts.

Siemens 771-8STF1 current-to-pneumatic (I/P) transducer converts a DC mA input to a proportional pneumatic output. Configuration: 4–20 mA input, 3–27 psig output, standard output capacity, terminal strip, intrinsically safe approval.

Allen-Bradley 100-DS1-20 auxiliary contact block expands control contacts on 100-D contactors, delivering status signaling for industrial motor control.

Hirschmann RS20-0800T1T1SDAEHH09.0.04 is an 8-port managed Fast Ethernet switch for DIN-rail networks, delivering store-and-forward switching, redundant power support, and Layer 2 Enhanced operation in a fanless industrial form factor.

The Siemens 3TX4422-0A SIRIUS auxiliary contact block features 2NO + 2NC instantaneous contacts with screw-type terminals. Designed for use with contactor relays and power contactors according to EN 50011, it supports snap-on mounting, IP20 front protection, and positively driven operation per IEC 60947-5-1.

The Universal 447-LR-TC-P is a 120V magnetic fluorescent ballast designed to operate two lamps in trigger-start configurations. It supports F20T12, F15T8, and F15T12 lamps and features a low power factor, lag-type circuit. UL and CSA certifications support indoor and Type 1 outdoor use.

Johnson Controls P10BC-7C low pressure control, SPDT, 1-stage, 3 to 20 psi range, 12 psig factory setting, 2 psi switch differential, with barbed fitting.

Siemens 5SY4108-7 delivers reliable 8A Type C circuit protection for DIN-rail systems, ideal for control and lighting circuits needing dependable overload and short-circuit performance.

The General Electric DS200DDTBG2ABB is an LCI Auxiliary I/O Terminal Board for GE Mark V Speedtronic gas and steam turbine control systems. It provides auxiliary signal termination, conditioning, and isolation for analog and digital I/O in high-voltage industrial control environments.

The ABB 1SVR430841R0200 CM-SRS.11 provides TRMS current monitoring with adjustable thresholds and multiple ranges, ideal for single-phase industrial control protection.

Lake Shore RIMF2V1 frequency-to-voltage converter brings encoder signal conversion into a compact control module with selectable V/RPM and PPR settings, 0/4-20 mA output, ±10V output, ±300V output, and relay output.

Bussmann BPM275UL is a plug-in DIN rail surge protection module for 275 V systems, delivering 40 kA maximum surge current, 20 kA nominal discharge current, and local status indication for panel protection applications.

The MTL IOP32D is a DIN-rail mounted surge protection device designed to protect digital and analogue I/O circuits. It provides surge protection for two independent loops (four wires) using a hybrid protection circuit rated up to 20 kA. The device is suitable for industrial control and instrumentation applications and is certified for use in hazardous areas.

The Advance L-220-F is a magnetic reactor ballast designed to operate two 15W or 20W preheat fluorescent lamps at 120V AC, 60 Hz. It regulates lamp current using an inductive core and requires external starters for lamp ignition in preheat fluorescent systems.

AEMC AX503 Triple Output DC Power Supply comes with 30V, 2.5A outputs and 5V blind output, master-slave tracking, and LED display. Ideal for labs and testing.

Hubbell CS320I is a commercial-specification 3-way toggle switch rated 20A at 120/277V AC. It is side wired only, supports #14 to #10 AWG copper wire, and features an ivory nylon toggle with thermoplastic construction.

The Deltron ST150-1XX is a 150 W industrial AC-DC switching power supply with three DC outputs. It provides one 5 V output rated at 20 A and two 12 V outputs rated at 5 A each. Designed for terminal block wiring, it supports dual-range AC input and is used in control and automation systems.

Schneider Electric Telemecanique LC1D09 is a 3-pole AC contactor with a 120V 50/60Hz coil, rated 9 A in AC-3 applications, with integrated auxiliary contacts.

ABB S201-K1 miniature circuit breaker set consisting of two single-pole 1 A MCBs from the System pro M compact S200 series. Each breaker features a K tripping characteristic and is designed for DIN-rail mounting in AC or DC electrical installations.

The LEMO FGL.5K.314.CYMC20 is a 5K-Series circular push-pull connector with 14 low-voltage crimp contacts and IP68 environmental sealing. Designed for harsh environments, it supports up to 18 A per contact, reverse-gender configuration, and secure push-pull locking.

The Phoenix Contact RAD-OUT-8D-REL is an 8-channel digital relay output extension module for Radioline wireless systems. It provides floating relay contacts for reliable signal switching and supports DIN rail mounting in industrial automation environments.

Orbit OF7716 2 in steel EMT set-screw coupling connects two EMT thinwall conduit ends to extend raceways in dry locations with zinc electro-plated steel construction.

Honeywell T775U 2006 Series 2000 electronic universal controller for heat or cool applications, with 1 universal input, 1 temperature sensor input, 2 SPDT relays, and configurable mod outputs.