Search results for: 'connection with or to'

Square D SN0610 insulated groundable neutral assembly kit for 60A/100A heavy-duty safety switches, compatible with Class 3110 F5/F6 Series.

The Phoenix Contact 560-3889 is a power distribution interface module used within Emerson Ovation distributed control systems. It functions as a marshalling and power distribution interface between controllers and I/O field devices, supporting structured wiring through screw terminal connections in PLC and DCS panels.

Allen-Bradley 871A-TS5-D1 delivers a durable, IP67 M12 5-pin field-attachable connector for custom automation cable builds, ensuring reliable DC Micro sensor wiring.

The SATO RH1731100 is a genuine SEN 5 Cable data transfer cable assembly used inside SATO industrial label printers. This internal electrical component includes an attached micro switch and is designed to connect internal printer mechanisms to the main circuitry in supported M84xxS and M84xxSe series printers.

Square D FAL34050 delivers 50A, 3-pole thermal-magnetic circuit protection for 480V electrical systems with unit-mount installation and line/load lug connections.

Allen-Bradley 871A-TS5-DM1 M12 5-Pin field-attachable connector offers reliable IP67 wiring for sensors and automation devices, supporting 6–8 mm cables.

The Weidmüller 1122-8800-00 TRZ 24VDC 1CO is a slim DIN rail relay interface module with a 24 V DC control voltage and one changeover (SPDT) contact. It supports up to 6 A switching current and uses tension-clamp connections for secure, screwless wiring in control cabinets.

The Siemens TA2J6500 is an aluminum body 2-barrel lug accessory for use with 2- or 3-pole 200A–400A JD and LD frame molded case circuit breakers. It supports copper conductors from 3/0 AWG to 500 kcmil and aluminum conductors from 4/0 AWG to 500 kcmil, and is suitable for both line and load side connections.

Hubbell HBL2731 delivers a durable 30A 480V L16-30P twist-lock connection for industrial 3-phase equipment, ensuring secure, reliable power performance.

Westinghouse 1C31129G32 Ovation analog output module with 0-10V analog output labeling. Industrial control module for Ovation system applications. Module only.

General Electric THQL32070 70A 3-Pole Breaker: Reliable thermal-magnetic protection with plug-in design, HACR rating, and quick-make, quick-break mechanism.

Introducing the OWON SP3101 - Your Compact Power Solution.

Phoenix Contact QUINT-DIODE/12-24DC/2X20/1X40 is a DIN-rail mounted redundancy diode module for 12–24 V DC systems. It decouples parallel power supplies to increase system availability, supporting 2×20 A redundancy or 1×40 A increasing power operation.

Hubbell HBL26420 Hubbellock industrial receptacle rated 60A 600V AC, 3-pole 4-wire grounding, screw terminals, cast aluminum long housing.

Leviton CR20-I commercial-grade duplex receptacle rated 20A, 125V in NEMA 5-20R configuration. Ivory narrow-body design with side-wire termination and self-grounding clip. Qty 5.

Eaton PKZM0-6,3/NHI11 motor-protective circuit breaker delivers adjustable 4-6.3 A thermomagnetic motor protection, screw-terminal wiring, and compact panel-ready installation for motor control applications.

Allen-Bradley 1794-TB32S offers reliable spring-clamp wiring for Flex I/O 32-point modules, delivering quick installation, RIUP support, and secure DIN-rail mounting.

Allen-Bradley 1734-MB 95723404 Series A mounting base delivers secure DIN-rail installation for POINT I/O modules, with keying and POINTBus connections for reliable setup.

Allen-Bradley 100-C16D*10 motor contactor built for switching motor loads in industrial control systems, featuring a 110-120V AC coil, 3-pole power contacts, and 1 NO auxiliary contact for control circuit integration.

Siemens SITOP select diagnosis module 6EP1961-2BA00 for 24 V DC systems. 4-channel electronic module (4x 10 A) that distributes and monitors load current with adjustable trip thresholds from 2–10 A. Supports selective channel shutdown on overload/short circuit with common signaling contact.

The Leviton 2453 is a 20 Amp, 277/480 Volt AC locking connector with a NEMA L19-20R configuration. It features a 4-pole, 4-wire, non-grounding design for 3-phase WYE applications. The connector uses an impact-modified nylon body with solid brass blades and contacts.

The WAGO 750-517 is a 2-channel digital output module with potential-free relay contacts for industrial automation systems. It features two changeover relays, supports up to 250 VAC or 300 VDC switching, and mounts on a DIN-35 rail using CAGE CLAMP® connections.

The Telemecanique GV2-AE11 is a front-mounted auxiliary contact block with 1 normally open and 1 normally closed contact. Designed for TeSys GV2 and GV3 motor circuit breakers, it provides status signaling and control feedback using screw clamp terminals.