Search results for: 'rated its'

Forney 312 High Energy Spark Igniter delivers Class 3 direct spark ignition for oil or gas igniters and small burners with 12 joules per spark, 2000 VDC output, and approximately 3 sparks per second.

Eaton XTCEXFAC20 auxiliary contactor supports control-panel auxiliary switching with two normally open contacts and visible AC/DC ratings.

Bussmann JP60030-3PR is a 3-pole Class J pyramid fuse block rated 30 A and 600 V for panel-mounted circuit protection using LPJ, DFJ, and JKS fuses in control and power distribution assemblies.

The Mitsubishi CP30-BA 1-Pole 7A M-Curve Circuit Protector is a compact hydraulic-magnetic circuit protector designed for supplementary protection of low-capacity industrial control circuits. It supports AC 250 V and DC 65 V operation and uses an M-curve trip characteristic suitable for moderate inrush loads.

Eaton DILEM-10 mini contactor delivers 8.80A switching, three-pole FVNR control, 1NO contact configuration, and 110–120 Vac coil operation in a compact IEC frame.

Eaton PKZM0-10 motor-protective circuit breaker delivers adjustable 6.3-10 A motor protection, phase-failure sensitivity, and 4 kW performance at 380/400 V AC-3e in a compact three-pole design.

The Fluke CV400 is a 4 in (95 mm) infrared window with hand turn door latch for electrical panel inspection. It features a ClirVu coating system, AutoGround functionality, IP67 rating, and a 63 kA arc-blast rating tested at KEMA. Designed for quick installation without removing the panel door.

The Schrack ZG400615 is a used ice cube relay rated for 5 Amps and up to 600 Volts. It features a 14-pin plug-in design and a 115 VAC coil voltage, making it suitable for general industrial control and electrical switching applications where reliable electromechanical control is required.

Siemens Q350 50A breaker provides reliable 3-pole protection for Siemens/ITE load centers, offering durable thermal-magnetic performance with plug-in QP design.

Philips 3534B5A0460A110A3 aluminum electrolytic capacitor offers 460–553 MFD capacitance with a 110–125 VAC, 50/60 Hz rating in a cylindrical can format for component replacement and parts matching.

The AEG SH 05.31 is a 4-pole auxiliary contactor from the SH 05 series with a 24V DC coil. It features a 3NO + 1NC contact configuration (31E) and screw terminals. Rated per AC-15 and DC-13 utilization categories as specified in the AEG 2014 extract catalogue.

Allen-Bradley 194R-NN030P3 delivers reliable 30A non-fused power isolation for industrial panels, supporting safe lockout/tagout and rotary disconnect operation.

The Siemens 3RV2031-4UA10 SIRIUS 3RV2 motor protection circuit breaker is a size S2, 3-pole device with adjustable thermal overload protection from 32 to 40 A. Rated for operation up to 690 V with Class 10 tripping characteristics, it integrates thermal and magnetic trip functions for motor branch circuit protection.

Eaton MES3800LSIG LSIG trip unit delivers adjustable 800A protection for Series C J/K-Frame breakers, supporting long, short, instantaneous and ground-fault functions.

Eaton DILEM-10 XTMC9A10B XT IEC mini contactor delivers 3-pole full-voltage non-reversing control with an 8.80A rating, 20A continuous rating, 220–240 Vac coil, 1 NO contact configuration, and screw terminals.

Hubbell HBL300FBK single pole female plug delivers high-current 300A, 600V power connection performance in a black single-pole configuration for demanding electrical connection points.

General Electric CR2790E100A2 general purpose control relay with 115V AC 60Hz coil, 10A contact rating, and 300V max rating for industrial control and switching applications.

Leviton 165-4579-C delivers industrial-grade locking connector capability for 15 Amp, 250 Volt electrical connections with a 2-pole, 3-wire grounding configuration.

Eaton WMZS1B10 10A B-curve breaker delivers reliable supplementary protection for control panels, electronics, and DIN-rail systems with fast, current-limiting performance.

The Hammond Power CRX06D1BC is a three-phase iron core line reactor rated for 600 VAC and 6.1 A. Part of the HPS Centurion® R Series, it provides controlled impedance to mitigate harmonics and electrical transients in AC drive systems operating at 50/60 Hz.

The Turck B8241-0/PG9 is a field-wireable M12 right-angle, 4-position female connector designed for sensor and actuator wiring in industrial automation. It uses a screw terminal connection, supports 250 V at 4 A, and accepts PG9 cable glands for secure, sealed installations.

Hubbell CS320I is a commercial-specification 3-way toggle switch rated 20A at 120/277V AC. It is side wired only, supports #14 to #10 AWG copper wire, and features an ivory nylon toggle with thermoplastic construction.