Search results for: 'CHIK'

The T.A. Systems EL-9060 is a sonic relay board module designed for industrial control applications operating on 24VDC. It is used to translate low-power control signals into higher-power switching actions within industrial automation and machinery control systems.

The Sprecher + Schuh D5-3T12 is a transformer element for D5 series 22 mm pilot devices. It converts a 480 V control voltage to a 6 V output for powering an incandescent lamp, allowing low-voltage lamp operation in high-voltage industrial control panels.

The ABB DSQC 504 Base Connector Unit is a passive I/O interface module used in ABB robot controller systems. It functions as a centralized backplane for connecting axis control modules, power supplies, safety wiring, and external I/O devices within S4, S4C, and S4C+ controller cabinets.

ABB TB806 Bus Inlet is a Modulebus extension cable adaptor with a D-sub 25 male connector. It is used with the TK801 extension cable to extend the ModuleBus in ABB S800 I/O systems. One adaptor is required per extension cable.

The Allen-Bradley 800S-R2SX is a standard-duty, two-position selector switch designed for surface-mount industrial control applications. It features a maintained ON/OFF knob operation, screw terminal wiring, and a NEMA Type 1 enclosure for general-purpose environments.

The Honeywell HPK2-3 51401583-100 Enhanced Process Network Interface (EPNI) board is a core logic component used within Network Interface Modules in Honeywell TDC 3000 Distributed Control Systems. It supports data communication between control networks in industrial automation environments.

Telergon 400A DC Disconnect Switch: High-performance, 1500V power isolation for solar & industrial use. Reliable, durable, and built for safety!

Omron MK3P5-S relay: Reliable 3PDT switching with mechanical indicator and test button for precise control in industrial applications.

Introducing the OWON SP3103 - Your Compact Powerhouse.

Schneider Electric 9001KU7 is a clear silicone rubber push button boot for Harmony 9001K and 9001SK non-illuminated 30 mm push buttons.

The Universal 447-LR-TC-P is a 120V magnetic fluorescent ballast designed to operate two lamps in trigger-start configurations. It supports F20T12, F15T8, and F15T12 lamps and features a low power factor, lag-type circuit. UL and CSA certifications support indoor and Type 1 outdoor use.

ABB S201-K1 miniature circuit breaker set consisting of two single-pole 1 A MCBs from the System pro M compact S200 series. Each breaker features a K tripping characteristic and is designed for DIN-rail mounting in AC or DC electrical installations.

The TCI AS-B875-002 KLC25BE dv/dT Guard Output Filter is designed to protect AC motors driven by PWM variable frequency drives. Rated for 25 A, 3-phase, 480 V systems, it limits voltage spikes and dV/dt effects that can damage motor insulation and cabling.

The MEAN WELL HRP-600-15 is a single-output enclosed AC-DC power supply delivering 15 VDC at up to 43 A. It features built-in active power factor correction, fan cooling with ON-OFF control, and protection against overload, over-voltage, and over-temperature for industrial power applications.

Phoenix Contact QUINT-DIODE/12-24DC/2X20/1X40 is a DIN-rail mounted redundancy diode module for 12–24 V DC systems. It decouples parallel power supplies to increase system availability, supporting 2×20 A redundancy or 1×40 A increasing power operation.

Phoenix Contact 2832771-HW16 FL Switch SF 8TX delivers reliable 8-port 10/100 Mbps industrial Ethernet expansion with plug-and-play setup and DIN-rail mounting.

KATKO KU 380N load break switch delivers 3-pole isolation and switching up to 80A at 690V AC-22, supporting reliable control and disconnection of electrical loads in industrial power systems.

Mitsubishi TH-T25KP thermal overload relay provides 3-element overload protection with a 1.7 A heater designation, 1.4–2 A setting range, and auxiliary NO/NC contacts for industrial motor control circuits.

The Mitsubishi SR-T5 AC100V 3A2B contactor relay is designed for control circuits requiring reliable auxiliary switching. It operates on a 100–127 VAC coil and provides 3 normally open and 2 normally closed contacts. The compact design supports DIN rail or screw mounting.

Allen Bradley 700S-CFB440KDC Safety Relay: Reliable 110V industrial control relay. Built for precision, durability, and seamless performance in demanding environments.

Allen-Bradley 193-T1AB48 bimetallic overload relay delivers adjustable 3.5-4.8 A motor overload protection with Class 10 tripping, phase-loss sensitivity, and manual or automatic reset for motor starter assemblies.

The TRACO POWER TSP 090-124 is a 90W DIN-rail mounted industrial power supply providing a regulated 24VDC output at up to 3.75A. Designed for factory and control panel environments, it features universal 85–264VAC input, convection cooling, adjustable output voltage, DC-OK signaling, and integrated protection functions.

The TRACO Power TSP 090-124EX is a 90 W DIN-rail mount industrial power supply providing 24 VDC at 3.75 A. It features universal 85–264 VAC input, adjustable 24–28 VDC output, DC-OK signal, remote On/Off control, and ATEX II3G certification for hazardous locations.

The Eaton P1-25/V/SVB is a 25 A, three-pole main switch from the Eaton Moeller® P1 series designed for rear mounting applications. It features a door-coupling rotary drive with a red rotary handle and yellow locking ring, and supports emergency switching off functionality. The switch is rated up to 690 V AC, provides IP65 front protection, and is lockable in the 0 (Off) position for secured isolation.