Search results for: 'box'

The Murr Elektronik 23050 is a three-phase RC motor suppressor designed to reduce induced voltage peaks in AC motor applications. Rated for up to 575 VAC at 50/60 Hz and 4 kW engine power, it supports star-connected RC suppression and installation close to the interference source.

Allen-Bradley 1756-L55/A ControlLogix 5555 processor supplied with a 1756-M13/A 1.5 MB memory expansion module. This controller requires external memory for operation and installs in a ControlLogix chassis for high-performance industrial automation systems.

The Universal 827-SLH-TC-P is a magnetic instant-start fluorescent ballast designed to operate two slimline lamps on a 277V, 60 Hz power supply. It supports series lamp operation and is intended for replacement use in compatible commercial and industrial lighting fixtures.

The WAGO 750-517 is a 2-channel digital output module with potential-free relay contacts for industrial automation systems. It features two changeover relays, supports up to 250 VAC or 300 VDC switching, and mounts on a DIN-35 rail using CAGE CLAMP® connections.

The WAGO 249-117 is a gray, screwless end stop designed to secure DIN-35 rail-mounted terminal blocks. It snaps onto TS 35 x 7.5 mm or 35 x 15 mm rails without tools. Constructed from PA66 polyamide with UL94 V0 flammability rating, it provides stable positioning and electrical insulation.

The Deltron ST150-1XX is a 150 W industrial AC-DC switching power supply with three DC outputs. It provides one 5 V output rated at 20 A and two 12 V outputs rated at 5 A each. Designed for terminal block wiring, it supports dual-range AC input and is used in control and automation systems.

The HP A4978-62025 is an LCD and power switch subassembly mounted in a molded plastic bracket. The assembly integrates a monochrome LCD display and a front-panel power switch with a fixed ribbon cable terminating in a D-sub style connector. Identified by assembly label A4978-62025.

The Turck B8241-0/PG9 is a field-wireable M12 right-angle, 4-position female connector designed for sensor and actuator wiring in industrial automation. It uses a screw terminal connection, supports 250 V at 4 A, and accepts PG9 cable glands for secure, sealed installations.

The Emerson Ovation WH5D-2FF / 1X00416H03 power supply module provides regulated 24 VDC output for Ovation distributed control system backbones. The enclosed industrial module supports high-current control applications using wide-range AC or DC input power.

General Electric THQL32070 70A 3-Pole Breaker: Reliable thermal-magnetic protection with plug-in design, HACR rating, and quick-make, quick-break mechanism.

Leviton 16342-W Decora Plus duplex receptacle delivers a 20A, 125V NEMA 5-20R wiring solution with side-wire termination, self-grounding design, and white smooth-face Decora styling.

GE C208LSIR MicroVersaTrip Plus Trip Unit delivers replacement circuit breaker trip control with front-panel setup access, status display, and 800A sensor designation for compatible GE breaker systems.

Kanson Electronics 1010-1-J-2 off-delay timer relay delivers adjustable 0.5 to 50.0 second timing with 115V 50/60Hz operation and 10 amp output switching for industrial control circuits.

Tri-Mag Super 6250T2 power supply delivers regulated multi-voltage DC output including +5V, ±12V rails with up to 250 watts capacity for system power distribution and integration applications.

Square D 2510KG1 manual switch delivers reliable 30A control for single-phase systems with a 2-pole toggle design and non-reversing operation in a compact NEMA 1 enclosure.

Siemens 771-8STF1 current-to-pneumatic (I/P) transducer converts a DC mA input to a proportional pneumatic output. Configuration: 4–20 mA input, 3–27 psig output, standard output capacity, terminal strip, intrinsically safe approval.

The General Electric CR104PLT43 is a 30.5mm push-to-test indicator light designed for 240V AC industrial automation systems. Part of the GE CR104P series, it utilizes a resistor power supply and supports machine-tool and control panel applications where manual lamp verification is required.

The Delta AFB1224HE is a 24V DC brushless axial cooling fan designed for reliable airflow in electronic and industrial equipment. It features dual ball bearings, locked rotor protection, and a 120 × 120 × 38 mm frame for consistent thermal management applications.

The Universal 447-LR-TC-P is a 120V magnetic fluorescent ballast designed to operate two lamps in trigger-start configurations. It supports F20T12, F15T8, and F15T12 lamps and features a low power factor, lag-type circuit. UL and CSA certifications support indoor and Type 1 outdoor use.

The Eaton H2006B-3 is a Freedom NEMA heater coil set designed for thermal overload protection in motor control applications. This Class 20 standard trip heater pack supports selectable full load current settings from 1.79A to 2.9A via dial positions A–D and is supplied as a factory-calibrated set of three elements.

The Omron MY4Z DC24(S) is a general-purpose miniature power relay with a 4PDT contact configuration and 24 VDC coil. Rated for 5 A switching in four-pole applications, it is designed for sequence control and power switching in industrial control systems.

The Allen-Bradley AK-R2-360P500 Dynamic Brake Resistor is an external medium-duty resistor kit designed for PowerFlex 70 and 700 series drives. It provides 360 ohms of resistance with an 86 watt continuous power rating to dissipate regenerative energy during motor braking.

The General Electric DS200DDTBG2ABB is an LCI Auxiliary I/O Terminal Board for GE Mark V Speedtronic gas and steam turbine control systems. It provides auxiliary signal termination, conditioning, and isolation for analog and digital I/O in high-voltage industrial control environments.