Search results for: 'connection'

The Telemotive E7207-1 Circuit Board is an industrial automation component used in Telemotive radio control systems. Identified by part number E7207-1, this board is commonly applied in industrial control environments including crane and hoist remote control systems.

The Phoenix Contact RAD-OUT-4A-I is a compact analog extension module providing four independent 4–20 mA current outputs. Designed for DIN rail mounting, it operates from a 9–30 V DC supply via a bus foot connector and supports screw terminal wiring. The module is UL listed for Class I, Division 2 hazardous locations and CE compliant.

Leviton 4779-C delivers industrial-grade 15A, 277V NEMA L7-15R locking connectivity with grounding, screw termination, and rugged Black & White Series construction for dry electrical environments.

R. STAHL INTRINSPAK 9001/02-093-030-10 safety barrier for industrial control and intrinsically safe interface applications, identified with 250V and 30 mA raw-data rating information.

Orbit OF7716 2-inch EMT set-screw coupling delivers secure steel conduit joining with zinc electro-plated construction for reliable electrical raceway continuity in EMT installations.

Westinghouse 1C31129G32 Ovation analog output module with 0-10V analog output labeling. Industrial control module for Ovation system applications. Module only.

Orbit OF7716 2 in steel EMT set-screw coupling connects two EMT thinwall conduit ends to extend raceways in dry locations with zinc electro-plated steel construction.

Siemens POL906.00/MCQ Communication Module supports POL6xx-connected control architecture in a compact modular format, with visible LON-SCC identification plus on-product IP20, -40 to 70, 80 mA, and 0.4 W markings.

The Turck B8241-0/PG9 is a field-wireable M12 right-angle, 4-position female connector designed for sensor and actuator wiring in industrial automation. It uses a screw terminal connection, supports 250 V at 4 A, and accepts PG9 cable glands for secure, sealed installations.

The General Electric TEY120 is a 1-pole, 20-amp molded case circuit breaker designed for 277 VAC systems. It features a bolt-on mounting style, thermal magnetic protection, and LI trip functions. Rated at 14 kAIC at 277 V, it is commonly used in commercial and industrial lighting panel applications.

The HP A4978-62025 is an LCD and power switch subassembly mounted in a molded plastic bracket. The assembly integrates a monochrome LCD display and a front-panel power switch with a fixed ribbon cable terminating in a D-sub style connector. Identified by assembly label A4978-62025.

Eaton PKZM0-6,3/NHI11 motor-protective circuit breaker delivers adjustable 4-6.3 A thermomagnetic motor protection, screw-terminal wiring, and compact panel-ready installation for motor control applications.

Siemens SITOP select diagnosis module 6EP1961-2BA00 for 24 V DC systems. 4-channel electronic module (4x 10 A) that distributes and monitors load current with adjustable trip thresholds from 2–10 A. Supports selective channel shutdown on overload/short circuit with common signaling contact.

Leviton 16342-W Decora Plus duplex receptacle delivers a 20A, 125V NEMA 5-20R wiring solution with side-wire termination, self-grounding design, and white smooth-face Decora styling.

GE C208LSIR MicroVersaTrip Plus Trip Unit delivers replacement circuit breaker trip control with front-panel setup access, status display, and 800A sensor designation for compatible GE breaker systems.

Macro Sensors LVC-2500 Low Voltage Conditioner delivers DIN-rail LVDT and half-bridge signal conditioning with selectable 3 kHz, 5 kHz, or 10 kHz excitation, adjustable gain and offset, voltage and current outputs, and link-selectable analog math functions.

SOR 4N3-KK4-N1-C1A-ZZ pressure switch delivers adjustable 2-25 PSI switching for industrial pressure control, with 750 PSI over range and 1000 PSI proof pressure for monitored process applications.

The Allen-Bradley 1606-XLE480EP is a 24V DC, 20A (480W) switched mode power supply from the 1606-XLE Essential series. It supports 100–240V AC input and 110–150V DC input, features adjustable 24–28V output, 20% power reserve, DC OK relay contact, and screw terminals for DIN rail industrial installation.

Cantex 51337141 PVC Junction Box provides 12 x 12 x 4 molded rigid PVC protection for wires and terminals, with a gasketed cover for electrical device and fixture support.

Bussmann JP60030-3PR is a 3-pole Class J pyramid fuse block rated 30 A and 600 V for panel-mounted circuit protection using LPJ, DFJ, and JKS fuses in control and power distribution assemblies.

SOR 101RN-KK45-M4-C1A differential pressure switch with 10-75 PSID adjustable range, RN weathertight aluminum housing, KK DPDT switching element, M4 diaphragm and O-ring system, and C1A 1/4 in NPT(F) pressure port.

Leviton CR20-I commercial-grade duplex receptacle rated 20A, 125V in NEMA 5-20R configuration. Ivory narrow-body design with side-wire termination and self-grounding clip. Qty 5.

The Eaton P1-25/V/SVB is a 25 A, three-pole main switch from the Eaton Moeller® P1 series designed for rear mounting applications. It features a door-coupling rotary drive with a red rotary handle and yellow locking ring, and supports emergency switching off functionality. The switch is rated up to 690 V AC, provides IP65 front protection, and is lockable in the 0 (Off) position for secured isolation.

Eaton D7PAB relay socket kit with installed D7PF3AA relay and MOD-AMV120 MOV module delivers panel or DIN rail mounting, screw clamping termination, and D7-series control integration in one compact assembly.

TP-Link MC200CM Gigabit Media Converter provides 1000BASE-T to 1000BASE-SX conversion over multimode fiber, supporting Gigabit Ethernet connectivity through an RJ45 port and SC fiber port.