Search results for: 'from'

Introducing the OWON SPE6053 - Compact Precision Power Supply for Your Needs.

The HOFFMAN A24246GSC electrical enclosure delivers screw-cover, gasketed protection for wiring, junction, pull, and terminal box applications exposed to windblown dust and rain, with galvanized steel construction and IP66 performance.

Allen Bradley 1485P-P1R5-DR5 DeviceNet T-Port Connector provides reliable M12 trunk-to-drop branching for round media networks, ensuring durable industrial connectivity.

Introducing the OWON ODP3033: Triple the Power, Triple the Precision.

Eaton PKZM0-6,3/NHI11 motor-protective circuit breaker delivers adjustable 4-6.3 A thermomagnetic motor protection, screw-terminal wiring, and compact panel-ready installation for motor control applications.

Eaton PKZM0-10 motor-protective circuit breaker delivers adjustable 6.3-10 A motor protection, phase-failure sensitivity, and 4 kW performance at 380/400 V AC-3e in a compact three-pole design.

Vega D5.1/2.N Ex d Stopping Plug seals unused 1/2-14 NPT entries in hazardous-area enclosures with nickel plated brass construction, flush external installation, and certified flameproof protection.

The Leviton 010-80701 is a 1-gang black toggle wallplate constructed from molded thermoplastic nylon. Designed for standard wall box installations, it provides a durable, smooth-finish cover for single toggle switches in residential or commercial environments.

The Honeywell 30731808-001 Regulator Card is a power regulation module used in Honeywell industrial control systems. It converts a +24 VDC backplane input into regulated +5 VDC, +12 VDC, and −12 VDC outputs to support system modules within compatible control chassis.

The Honeywell 3PA2 is a zinc limit switch enclosure designed for use with basic switches. It provides a durable gray chassis-style housing with screw mounting for industrial applications requiring an enclosed switch case. Intended to protect switch terminals and internal mechanisms.

Moeller FT8478 voltage transformer delivers reliable 100VA power conversion from 600V to 120V for industrial control and electrical distribution applications requiring stable voltage step-down.

Killark 380S stamped steel conduit body cover designed for 1-inch trade size conduit bodies. Constructed from stamped steel with stainless steel screws, this UL and CSA approved blank cover is used to close and protect conduit body openings in electrical installations.

The General Electric 8G163WF is a fluorescent lamp ballast labeled for 277-volt operation and F48CW lamp applications. This unit is identified directly from manufacturer carton labeling and is supplied as a single ballast. No additional accessories or documentation are included.

GE Power 730157 DILOS 2-160 delivers 4-pole manual switch disconnection with 160A Ith and 690V Ui markings for electrical control and isolation setups.

Omega CN9111A temperature controller delivers precise thermal regulation with dual relay outputs and 115V operation, supporting controlled heating and cooling processes across industrial environments.

The Sprecher + Schuh D5-3T12 is a transformer element for D5 series 22 mm pilot devices. It converts a 480 V control voltage to a 6 V output for powering an incandescent lamp, allowing low-voltage lamp operation in high-voltage industrial control panels.

The REXA Koso S96111 Pulse Mod I/O Interface PCB Board is an internal electronic module used in REXA Electraulic™ actuators. It supports pulse modulation control and manages input and output signals within the actuator’s control system for precise positioning and communication.

The Schrack ZG400615 is a used ice cube relay rated for 5 Amps and up to 600 Volts. It features a 14-pin plug-in design and a 115 VAC coil voltage, making it suitable for general industrial control and electrical switching applications where reliable electromechanical control is required.

ABB Steel City 72171 is a 4-11/16 in square steel electrical box with a 2-1/8 in depth and 42 cu in capacity. Constructed from pre-galvanized steel, it features eccentric knockouts for 1/2 in and 3/4 in conduit and is designed for commercial conduit wiring installations.

The Leviton 2453 is a 20 Amp, 277/480 Volt AC locking connector with a NEMA L19-20R configuration. It features a 4-pole, 4-wire, non-grounding design for 3-phase WYE applications. The connector uses an impact-modified nylon body with solid brass blades and contacts.

Thomas & Betts 17220-BD copper compression terminal lugs are designed for 3/0 AWG copper conductors and 3/8 inch studs. Manufactured from tin-plated copper, these orange Color-Keyed lugs support verified crimping with compatible dies and tools. Quantity of 10 lugs per package.

The Crouzet PJR 110A P4700 is a plug-in alternator control relay operating on a 110 VAC supply. The module provides SPDT relay output rated at 10 A and is housed in a compact rectangular enclosure with front position indicators. Used in control and protection circuits where monitored voltage conditions determine relay actuation.

Hubbell 0740-113-36 Deluxe Cord Grip enables secure liquidtight cable entry for .500"–.625" insulated cables with corrosion-resistant stainless steel mesh and oil-resistant sealing.

The Mitsubishi CP30-BA 1-Pole 10A M-Curve Circuit Protector is a compact supplementary circuit breaker designed for protection of low-capacity control circuits, motors, and transformers. It supports AC 250 V and DC 65 V operation and mounts on a standard 35 mm DIN rail using screw terminals.