Search results for: 'internal'

The C3 Controls DDS2-340-DHGRY is a non-fused, 40 amp, 3-pole disconnect switch designed for door-mount applications. It features a red/yellow rotary operating handle and an IP65 ingress protection rating for use in industrial control environments requiring reliable circuit isolation.

The General Electric CR305X100E is a side-mounted auxiliary contact adder block providing one normally closed (1 NC) contact for GE 200- and 300-Line starters and contactors. It is designed for field installation onto a basic auxiliary contact block and is rated up to 600 VAC and 250 VDC.

Eaton DILM12-10 XTCE012B10A XT IEC contactor provides 12A three-pole full-voltage non-reversing control with 110–120 Vac coil, 1 NO contact configuration, and screw terminals.

GAI-Tronics 7335-001 is a 5 party line weatherproof non-metallic enclosure built for analog Page/Party intercom systems, combining NEMA 4X outdoor protection, 120 VAC input, and reinforced polyester fiberglass construction for demanding installations.

Siemens SM-30 580-821670 Switch Module delivers two manually operated SPDT switches for fire alarm and control functions including signal silence, relay activation, disconnect, drill, override, and bypass control.

Allen-Bradley PHOTOSWITCH Series 9000 transmitted beam receiver sensor (42GRR-9003-QD, Series A) with 70–264V AC/DC operation, isolated N.O. solid-state (MOSFET) output, 4-pin AC Micro quick-disconnect, and IR 880 nm optics.

Allen-Bradley 700-K40E-* Series B control relay brings compact 4-pole NO switching for industrial control circuits, with IEC-rated performance up to AC-12 690V 10A and clearly marked screw-terminal connectivity.

Moore Industries DPS/24DC/1200MA/117AC [DIN] DIN power supply with 24VDC output, 1200mA output current, 117AC input, isolated output, and DIN rail-mount housing.

The TRACO Power TSP 090-124EX is a 90 W DIN-rail mount industrial power supply providing 24 VDC at 3.75 A. It features universal 85–264 VAC input, adjustable 24–28 VDC output, DC-OK signal, remote On/Off control, and ATEX II3G certification for hazardous locations.

GE TED134030 breaker delivers reliable 30A thermal-magnetic protection for GE Spectra E150 systems, ensuring safe, high-performance operation in 480V applications.

Eaton PKZM01-1 delivers reliable 0.63–1A motor protection with thermal-magnetic performance, IEC compatibility, and dependable overload and short-circuit safeguarding.

The SSAC FS165-30T is a solid state beacon flasher designed for tower and obstruction lighting systems. Operating on 230VAC, it supports up to 5000W loads and provides an OFF-first flash sequence at 30 flashes per minute. Encapsulated construction supports demanding environments.

Eaton PKZM0-6,3/NHI11 motor-protective circuit breaker delivers adjustable 4-6.3 A thermomagnetic motor protection, screw-terminal wiring, and compact panel-ready installation for motor control applications.

Schneider RXM4AB2B7 relay delivers reliable 24V AC control with 4CO contacts, LED status, and test button, ideal for industrial automation using RXZE sockets.

Black Box IC107A-R2 RS-232↔RS-422/485 converter for data-only serial communication. Supports 4-wire full-duplex operation for point-to-point or multipoint links. Provides a DB25 female RS-232 interface and a 4-pin terminal block for RS-422/485 with TX/RX/PWR LEDs.

IPC 005-4240 power resistor delivers 110 ohm resistance with 800W heat dissipation for dynamic braking, load testing, and industrial energy control applications.

The Mitsubishi CP30-BA 1-Pole 5A M-Curve Circuit Protector is a compact DIN-rail-mounted supplementary protector designed for low-capacity control circuits. It features a medium-speed hydraulic-magnetic tripping characteristic, 5 A current rating, and supports AC 250 V or DC 65 V operation in industrial control panels.

Mersen High-Speed Cylindrical Fuse: Fast-acting 690VAC protection for inverters, UPS, and motor drives. Reliable, current-limiting, and built for semiconductor safety.

Protect your power electronics with the Mersen W300008 PC31UD69V630TF  Protistor® Size 31 aR Fuse—630A, high-speed, and built for reliable semiconductor protection at up to 700VAC!

Siemens 5SY4110-7 SENTRON 10A MCB delivers reliable C-curve circuit protection for 230/400V systems, ideal for industrial, commercial, and control panel applications.