Search results for: 'lbs'

The General Electric CR104PLT43 is a 30.5mm push-to-test indicator light designed for 240V AC industrial automation systems. Part of the GE CR104P series, it utilizes a resistor power supply and supports machine-tool and control panel applications where manual lamp verification is required.

The Siemens TA2J6500 is an aluminum body 2-barrel lug accessory for use with 2- or 3-pole 200A–400A JD and LD frame molded case circuit breakers. It supports copper conductors from 3/0 AWG to 500 kcmil and aluminum conductors from 4/0 AWG to 500 kcmil, and is suitable for both line and load side connections.

The Universal 447-LR-TC-P is a 120V magnetic fluorescent ballast designed to operate two lamps in trigger-start configurations. It supports F20T12, F15T8, and F15T12 lamps and features a low power factor, lag-type circuit. UL and CSA certifications support indoor and Type 1 outdoor use.

The Hammond Power CRX06D1BC is a three-phase iron core line reactor rated for 600 VAC and 6.1 A. Part of the HPS Centurion® R Series, it provides controlled impedance to mitigate harmonics and electrical transients in AC drive systems operating at 50/60 Hz.

The Eaton H2006B-3 is a Freedom NEMA heater coil set designed for thermal overload protection in motor control applications. This Class 20 standard trip heater pack supports selectable full load current settings from 1.79A to 2.9A via dial positions A–D and is supplied as a factory-calibrated set of three elements.

The Allen-Bradley AK-R2-360P500 Dynamic Brake Resistor is an external medium-duty resistor kit designed for PowerFlex 70 and 700 series drives. It provides 360 ohms of resistance with an 86 watt continuous power rating to dissipate regenerative energy during motor braking.

Eaton XTCEXFAC20 auxiliary contactor supports control-panel auxiliary switching with two normally open contacts and visible AC/DC ratings.

Siemens A1-108-101-502 operator display control panel for parameter access, status monitoring, and fault diagnostics in compatible SIMOREG DC drive systems.

Thomas & Betts 5257 is a 2 in non-insulated 90° liquidtight conduit connector for liquidtight flexible metallic conduit, with NPT threads and malleable iron body construction. 

Allen-Bradley 800H-JP2KB7AAXX hazardous location selector switch from Bulletin 800H. This is a 3-position, non-illuminated, maintained standard knob operator with KB7 standard cam and AAXX contact block configuration.

The Allen-Bradley 1606-XLE480EP is a 24V DC, 20A (480W) switched mode power supply from the 1606-XLE Essential series. It supports 100–240V AC input and 110–150V DC input, features adjustable 24–28V output, 20% power reserve, DC OK relay contact, and screw terminals for DIN rail industrial installation.

The TCI AS-B875-002 KLC25BE dv/dT Guard Output Filter is designed to protect AC motors driven by PWM variable frequency drives. Rated for 25 A, 3-phase, 480 V systems, it limits voltage spikes and dV/dt effects that can damage motor insulation and cabling.

Allen-Bradley 1492-FB3J60-L fuse holder provides secure Class J fuse mounting for control applications, supporting reliable protection in industrial systems.

Eaton WMZT1C10 offers reliable 10A C-curve protection for 277/480V panels, delivering dependable DIN-rail circuit safety for industrial and commercial systems.

Eaton DILM12-10 XTCE012B10A XT IEC contactor provides 12A three-pole full-voltage non-reversing control with 110–120 Vac coil, 1 NO contact configuration, and screw terminals.

Eaton C0200E2AFB delivers 200 VA industrial control transformer performance with multi-voltage primary input and 120/115/110 V secondary output for control circuit power.

Bussmann JP60030-3PR is a 3-pole Class J pyramid fuse block rated 30 A and 600 V for panel-mounted circuit protection using LPJ, DFJ, and JKS fuses in control and power distribution assemblies.

GAI-Tronics 7335-001 is a 5 party line weatherproof non-metallic enclosure built for analog Page/Party intercom systems, combining NEMA 4X outdoor protection, 120 VAC input, and reinforced polyester fiberglass construction for demanding installations.

SOR 101RN-KK45-M4-C1A differential pressure switch with 10-75 PSID adjustable range, RN weathertight aluminum housing, KK DPDT switching element, M4 diaphragm and O-ring system, and C1A 1/4 in NPT(F) pressure port.

The Ferraz Shawmut UltraSafe USCC2 P216489 is a 2-pole modular fuse holder rated for 30A and 600 VAC/VDC for Class CC fuses. Designed for DIN rail mounting, it features IP20 finger-safe protection, pressure plate terminals, and a 200 kA SCCR for industrial control panel applications.

Eaton DILEM-10 XTMC9A10B XT IEC mini contactor delivers 3-pole full-voltage non-reversing control with an 8.80A rating, 20A continuous rating, 220–240 Vac coil, 1 NO contact configuration, and screw terminals.

Hubbell HBL4720C Twist-Lock Plug delivers 15A, 125V AC L5-15P locking power connection with black/white nylon Insulgrip construction and 2-pole, 3-wire grounding.

Hubbell HBL4570C Twist-Lock Plug delivers 15A, 250V AC L6-15P connectivity in a 2-pole, 3-wire grounding Insulgrip design with black/white nylon construction.

Eaton D7PAB relay socket kit with installed D7PF3AA relay and MOD-AMV120 MOV module delivers panel or DIN rail mounting, screw clamping termination, and D7-series control integration in one compact assembly.