Search results for: 'panel'

The Allen-Bradley 800FM-MT44 is a metal emergency stop push button operator with a 40 mm red mushroom actuator and twist-to-release operation. Designed for 22.5 mm panel mounting, this non-illuminated operator is part of the Bulletin 800FM metal series for industrial control applications.

Allen-Bradley 100-DS1-20 auxiliary contact block expands control contacts on 100-D contactors, delivering status signaling for industrial motor control.

Fischer 333007 Pneumatic Preparation Unit provides organized pneumatic routing for Seal Air, Taper Air, Tool Eject, and Cylinder Vent circuits in industrial equipment setups.

General Electric CR2790E100A2 general purpose control relay with 115V AC 60Hz coil, 10A contact rating, and 300V max rating for industrial control and switching applications.

The Allen-Bradley 800T-Q10R is a 30mm red pilot light with a full-voltage incandescent lamp rated for 120V AC/DC. Designed for industrial control panels, it features a metal operator construction, screw terminal connections, and compatibility with NEMA Type 1, 4, 12, and 13 enclosures.

The General Electric TEY120 is a 1-pole, 20-amp molded case circuit breaker designed for 277 VAC systems. It features a bolt-on mounting style, thermal magnetic protection, and LI trip functions. Rated at 14 kAIC at 277 V, it is commonly used in commercial and industrial lighting panel applications.

The Allen-Bradley 800B-N5W is a white LED lamp designed for use with Bulletin 800B 16 mm illuminated push-button and pilot light operators. Rated for 120V AC operation, this LED bulb provides consistent white illumination with low power consumption and extended service life in industrial control panel applications.

The Tristar S0803-0000 is a compact 12V DC white LED indicator designed for 1/2" hole mounting. This polarity-sensitive LED draws approximately 0.02–0.03 amps and consumes about 0.25 watts. The unit features a 1/2" diameter body with a 1.75" housing length and is suitable for low-draw DC indicator applications.

Allen-Bradley 800T-FX6A5 delivers a rugged 30.5 mm red push-pull emergency stop with 40 mm mushroom head and 2 NC contacts for dependable industrial safety control.

GF Signet 3-8512 flow transmitter converts compatible sensor frequency input to a 4-20 mA process signal for flow monitoring and control. Local display and keypad are built into the unit.

ABB 1SVR427032R0000 switch mode power supply delivers 24 VDC output at 2.5 A from a 100–240 VAC input, with adjustable output voltage from 24–28 VDC and 60 W max load capacity for control and industrial power applications.

Hammond Power PH50MBMH industrial control transformer delivers 50 VA power conversion with multi-voltage primary and secondary configurations, supporting stable control circuit operation in machine tool and automation environments.

Lake Shore RIMF2V1 frequency-to-voltage converter brings encoder signal conversion into a compact control module with selectable V/RPM and PPR settings, 0/4-20 mA output, ±10V output, ±300V output, and relay output.

Allen-Bradley 1492-CB2 H 200 is a 2-pole DIN-rail supplementary circuit breaker designed for industrial control panels, providing reliable thermal-magnetic overcurrent protection with an H-curve trip characteristic.

Schneider Electric Telemecanique LC1 D09 10 is a 3-pole magnetic contactor for AC motor control and circuit switching, with an integrated 1 NO auxiliary contact and motor-starting capability up to 4 kW at 400V.

Allen-Bradley 1492-CB1 H030 is a 3A, 1-pole DIN rail supplementary circuit breaker designed for control circuit protection, featuring an H-trip curve for highly inductive loads and compact panel integration.

The Allen-Bradley 800B-PS11 is a 16 mm snap-action contact block with one normally open and one normally closed contact. Designed for Bulletin 800B push button and selector switch operators, it supports reliable low-voltage switching and compact panel installations in light industrial and instrumentation applications.

The Contrex M-Drive 4E is a digital DC motor drive and motion controller designed for closed-loop speed regulation of permanent magnet DC motors up to 2 HP. It supports dual AC input voltage, selectable DC output, serial communication, and integrated operator interface.

Allen-Bradley 1492-FB3C30-L is a 3-pole Class CC fuse holder for the 1492 Wiring System, rated 30A and up to 600V AC, featuring an integrated LED indicator for clear fuse status visibility.

Moore Industries TIY/PRG/4-20MA/12-42DC [DIN] is a programmable isolated thermocouple transmitter that accepts common thermocouple types and millivolt inputs and delivers a linear 4-20mA output with front-panel ranging, display indication, and self-diagnostics.

Eaton WMS1C10SP 10A supplementary protector offers reliable Type C protection for control panels, PLCs, and power supplies with DIN-rail mounting and UL1077 compliance.

Eaton PKZM0-25/NHI11 motor-protective circuit breaker delivers adjustable 20–25 A thermomagnetic motor protection with phase-failure sensitivity for motor control and panel protection applications.

Allen-Bradley 1489-M1C100 miniature circuit breaker delivers 10 A, 1-pole thermal-magnetic branch circuit protection with a C trip curve for control panels and IEC applications.

Eaton 10250ED555-8 pushbutton delivers durable, oiltight control for 30.5 mm panels, offering reliable industrial operation and compatibility with Eaton 10250T components.

Eaton E30KLA1 delivers reliable 1NO switching for E30 pushbuttons, featuring silver contacts and durable construction for industrial control applications.