Search results for: 'rail'

The WAGO 750-517 is a 2-channel digital output module with potential-free relay contacts for industrial automation systems. It features two changeover relays, supports up to 250 VAC or 300 VDC switching, and mounts on a DIN-35 rail using CAGE CLAMP® connections.

The Siemens 5SJ4210-7HG42 is a 2-pole miniature circuit breaker from the 5SJ4 Series, rated at 10 A and up to 277 V. It provides thermal-magnetic overcurrent protection for branch circuit and feeder applications and is designed for standard 35 mm DIN rail mounting.

The Mitsubishi CP30-BA 1-Pole 5A M-Curve Circuit Protector is a compact DIN-rail-mounted supplementary protector designed for low-capacity control circuits. It features a medium-speed hydraulic-magnetic tripping characteristic, 5 A current rating, and supports AC 250 V or DC 65 V operation in industrial control panels.

Schneider Electric CAD50G7 is a TeSys Deca control relay with five normally open contacts and a 120 VAC 50/60 Hz control coil. Rated up to 690 VAC and 10 A, it supports DIN rail or panel mounting and is designed for industrial control circuit applications.

The Phoenix Contact RAD-OUT-8D-REL is an 8-channel digital relay output extension module for Radioline wireless systems. It provides floating relay contacts for reliable signal switching and supports DIN rail mounting in industrial automation environments.

Allen-Bradley 1492-FB2C30-L fuse holder delivers Class CC 30A protection with an LED fault indicator, DIN-rail mounting, and safe, compact industrial performance.

ABB SU201M-K6 miniature circuit breaker delivers 1-pole, 6 A branch circuit protection with K-curve tripping and AC/DC compatibility for control panels and distribution assemblies. 

Allen-Bradley 1794-TB32S offers reliable spring-clamp wiring for Flex I/O 32-point modules, delivering quick installation, RIUP support, and secure DIN-rail mounting.

The Siemens 3RV2031-4UA10 SIRIUS 3RV2 motor protection circuit breaker is a size S2, 3-pole device with adjustable thermal overload protection from 32 to 40 A. Rated for operation up to 690 V with Class 10 tripping characteristics, it integrates thermal and magnetic trip functions for motor branch circuit protection.

The MTL IOP32D is a DIN-rail mounted surge protection device designed to protect digital and analogue I/O circuits. It provides surge protection for two independent loops (four wires) using a hybrid protection circuit rated up to 20 kA. The device is suitable for industrial control and instrumentation applications and is certified for use in hazardous areas.

The Phoenix Contact RAD-OUT-4A-I is a compact analog extension module providing four independent 4–20 mA current outputs. Designed for DIN rail mounting, it operates from a 9–30 V DC supply via a bus foot connector and supports screw terminal wiring. The module is UL listed for Class I, Division 2 hazardous locations and CE compliant.

The Ferraz Shawmut USCC3I is a 3-pole ULTRASAFE modular Class CC fuse holder rated for 600 VAC and 30 A. It accepts Class CC fuses only, incorporates integrated blown-fuse indicators, and mounts on standard 35 mm DIN rail for industrial electrical panels.

ABB TB806 Bus Inlet is a Modulebus extension cable adaptor with a D-sub 25 male connector. It is used with the TK801 extension cable to extend the ModuleBus in ABB S800 I/O systems. One adaptor is required per extension cable.

The Eaton FAZ-C20/3 is a 20 A, three-pole miniature circuit breaker from the Moeller xEffect FAZ series. It features a C tripping characteristic and is rated for 240 V AC / 415 V AC applications. Designed for industrial and advanced commercial switchgear, it mounts on a 35 mm top-hat rail in accordance with IEC/EN 60715 and supports modular installation with a width of three modules.

The Mitsubishi CP30-BA 1-Pole 10A M-Curve Circuit Protector is a compact supplementary circuit breaker designed for protection of low-capacity control circuits, motors, and transformers. It supports AC 250 V and DC 65 V operation and mounts on a standard 35 mm DIN rail using screw terminals.

The Keyence SL-U2 is a switching-type power supply unit designed for industrial safety applications. It provides a regulated 24 VDC output at up to 1.8 A from a universal 100–240 VAC input and is intended for use with Keyence safety light curtain systems.

The Murr Elektronik 23050 is a three-phase RC motor suppressor designed to reduce induced voltage peaks in AC motor applications. Rated for up to 575 VAC at 50/60 Hz and 4 kW engine power, it supports star-connected RC suppression and installation close to the interference source.

Eaton XTCE012B10TD contactor delivers reliable 3-pole motor control with a 24V DC coil, 12A rating, and IEC compatibility for XT series motor starter systems.

Siemens 5SJ4110-7HG42 delivers reliable 10A C-curve protection for DIN-rail panels, offering SENTRON-series performance for industrial and commercial circuits.

ABB S201-K1 miniature circuit breaker set consisting of two single-pole 1 A MCBs from the System pro M compact S200 series. Each breaker features a K tripping characteristic and is designed for DIN-rail mounting in AC or DC electrical installations.

Allen-Bradley 1489-M D25A miniature circuit breaker delivers 3-pole, 25A D-curve thermal-magnetic protection for industrial branch circuits with high inrush current demands.

Schneider Electric Telemecanique LC1 D09 10 is a 3-pole magnetic contactor for AC motor control and circuit switching, with an integrated 1 NO auxiliary contact and motor-starting capability up to 4 kW at 400V.

Sprecher + Schuh CS7E-31E control relay with attached CS7-PV auxiliary contact block. Rated for up to 690V AC, this 4-pole industrial control relay is used for switching control circuits in panel and machine control applications.

The Allen-Bradley 1606-XLE480EP is a 24V DC, 20A (480W) switched mode power supply from the 1606-XLE Essential series. It supports 100–240V AC input and 110–150V DC input, features adjustable 24–28V output, 20% power reserve, DC OK relay contact, and screw terminals for DIN rail industrial installation.