Search results for: 'series witse'

Allen-Bradley 1492-CB1-H010 supplementary protector delivers 1-amp single-pole thermal-magnetic overcurrent protection for industrial control circuits using DIN rail mounting.

The Fireye 4-314-1 is an ultraviolet sensing tube used in Fireye flame scanner assemblies. This tube is supplied as a standalone replacement component and is identified on the original manufacturer carton for use with select 45UV series scanners. No scanner body or accessories are included.

The Allen-Bradley 2198-K57CK-D15M is a universal feedback connector kit for Kinetix 5700 drives. It provides wire terminations for encoder signals when using Allen-Bradley 2090-Series motor feedback cables and connects to the drive’s universal feedback (UFB) port.

The Sprecher + Schuh D5-3T12 is a transformer element for D5 series 22 mm pilot devices. It converts a 480 V control voltage to a 6 V output for powering an incandescent lamp, allowing low-voltage lamp operation in high-voltage industrial control panels.

Allen-Bradley 1734-MB 95723404 Series A mounting base delivers secure DIN-rail installation for POINT I/O modules, with keying and POINTBus connections for reliable setup.

The Universal 827-SLH-TC-P is a magnetic instant-start fluorescent ballast designed to operate two slimline lamps on a 277V, 60 Hz power supply. It supports series lamp operation and is intended for replacement use in compatible commercial and industrial lighting fixtures.

The Siemens 5SJ4210-7HG42 is a 2-pole miniature circuit breaker from the 5SJ4 Series, rated at 10 A and up to 277 V. It provides thermal-magnetic overcurrent protection for branch circuit and feeder applications and is designed for standard 35 mm DIN rail mounting.

Emerson KJ3222X1-BK1 is a DeltaV S-Series analog input module with 8 channels for 4-20 mA HART signals. The module is identified on manufacturer documentation as AI 8 CH 4-20mA HART CARD.

The Struthers-Dunn W88AHPX-36 is a hermetically sealed 3PDT plug-in relay from the 88HP Series, rated 10A and configured for 120VAC operation. It features an 11-pin octal base and a sealed gray metal enclosure designed to prevent contamination and corrosion.

The Square D 9065-AT-1L is a thermal overload relay designed for motor protection applications. This unit features a manual reset mechanism and copper line/load terminals, as shown. Identified by manufacturer labeling, it is part of the Square D Class 9065 series.

Allen-Bradley 700-K40E-* Series B control relay brings compact 4-pole NO switching for industrial control circuits, with IEC-rated performance up to AC-12 690V 10A and clearly marked screw-terminal connectivity.

Eaton 9575H3A000 relay offers reliable DPDT switching for industrial control systems, featuring a 110/120V coil and heavy-duty performance for diverse AC/DC loads.

Eaton WMZS2B20 delivers reliable 20A Type B supplementary protection for control circuits, offering fast trip performance, DIN-rail mounting, and UL1077 compliance.

The Emerson DeltaV KL4502X1-BA1 (12P4990) is a CHARM standard terminal block designed for use with the DeltaV S-series Electronic Marshalling system. It provides the physical interface for field wiring and supports installation of CHARM (Characterization Module) components within DeltaV control architectures.

Allen-Bradley 194R-NJ030P3 fused rotary disconnect switch offers 30A, 600V isolation for industrial panels, supporting Class CC/J fuses and high-fault protection.

The HOFFMAN A24246GSC electrical enclosure delivers screw-cover, gasketed protection for wiring, junction, pull, and terminal box applications exposed to windblown dust and rain, with galvanized steel construction and IP66 performance.

The Potter & Brumfield KHAU-17D11-24 is a general-purpose industrial plug-in relay with a 24 VDC coil and 4 Form C contact arrangement. Designed for socket mounting, it supports control and power switching applications requiring multiple changeover contacts.

Johnson Controls P10BC-7C low pressure control, SPDT, 1-stage, 3 to 20 psi range, 12 psig factory setting, 2 psi switch differential, with barbed fitting.

The Eaton WMZS2C50 2-pole 50A Type C breaker offers reliable DIN-rail protection for moderate-inrush industrial loads, delivering resettable thermal-magnetic performance.

Eaton E30AD pushbutton operator delivers maintained and release control in a compact two-button configuration for industrial control panels and multifunction applications.

Allen-Bradley 1492-CB2 H 200 is a 2-pole DIN-rail supplementary circuit breaker designed for industrial control panels, providing reliable thermal-magnetic overcurrent protection with an H-curve trip characteristic.

Eaton E30KLA1 delivers reliable 1NO switching for E30 pushbuttons, featuring silver contacts and durable construction for industrial control applications.

Eaton FH80 overload relay heater element provides reliable thermal motor protection for A200/B100 starters, supporting accurate overload trip performance.