Search results for: 'and isaiah'

The Universal 447-LR-TC-P is a 120V magnetic fluorescent ballast designed to operate two lamps in trigger-start configurations. It supports F20T12, F15T8, and F15T12 lamps and features a low power factor, lag-type circuit. UL and CSA certifications support indoor and Type 1 outdoor use.

The Emerson Fisher-Rosemount KJ4001X1-CA1 is an I/O terminal block used as an interface between field wiring and control system I/O modules. The unit provides 16 numbered terminal positions and is designed for industrial automation installations, including hazardous location environments as indicated on the device label.

Black Box IC107A-R2 RS-232↔RS-422/485 converter for data-only serial communication. Supports 4-wire full-duplex operation for point-to-point or multipoint links. Provides a DB25 female RS-232 interface and a 4-pin terminal block for RS-422/485 with TX/RX/PWR LEDs.

Emerson KJ3222X1-BK1 is a DeltaV S-Series analog input module with 8 channels for 4-20 mA HART signals. The module is identified on manufacturer documentation as AI 8 CH 4-20mA HART CARD.

The Allen-Bradley AK-R2-360P500 Dynamic Brake Resistor is an external medium-duty resistor kit designed for PowerFlex 70 and 700 series drives. It provides 360 ohms of resistance with an 86 watt continuous power rating to dissipate regenerative energy during motor braking.

Littelfuse LPSC-ID is a 600 V AC/DC, 30 A Class CC fuse holder for branch circuit protection, combining dead front touch-safe construction, DIN-rail mounting, and blown-fuse indication above 80 V.

The Honeywell 3PA2 is a zinc limit switch enclosure designed for use with basic switches. It provides a durable gray chassis-style housing with screw mounting for industrial applications requiring an enclosed switch case. Intended to protect switch terminals and internal mechanisms.

Allen-Bradley 1492-CB1 H030 is a 3A, 1-pole DIN rail supplementary circuit breaker designed for control circuit protection, featuring an H-trip curve for highly inductive loads and compact panel integration.

The Leviton T5015-E is a 15 amp, 125 volt tamper resistant single receptacle designed for commercial and high-use residential applications. It features a grounding configuration, impact-resistant construction, and side or back wiring options for installation flexibility.

Cantex 51337141 PVC Junction Box provides 12 x 12 x 4 molded rigid PVC protection for wires and terminals, with a gasketed cover for electrical device and fixture support.

The Thermo Environmental 2200-0-010 Heater Control Module (P/N 22000010) is an industrial control board designed for regulated heater management within environmental and analytical systems. This module functions as a temperature control component in Thermo Environmental instrumentation platforms.

Introducing the OWON SP6053 - Your Compact Power Solution.

The Thomas & Betts Steel City BL113 is a 1-inch snap-in knockout blank made from zinc-plated steel for commercial electrical installations. Designed to close unused knockout openings in steel boxes, it provides a secure, tool-free fit for Rigid and IMC conduit applications.

The Honeywell 30731808-001 Regulator Card is a power regulation module used in Honeywell industrial control systems. It converts a +24 VDC backplane input into regulated +5 VDC, +12 VDC, and −12 VDC outputs to support system modules within compatible control chassis.

Introducing the OWON SPE6102 200W DC Power Supply: Precision, Portability, and Performance Unleashed

Eaton Cutler-Hammer C320KGS1 is a Freedom Series side-mounted auxiliary contact block with 1NO contact configuration for NEMA sizes 00 to 2 and IEC sizes A to K.

The Mitsubishi SR-T5 AC100V 3A2B contactor relay is designed for control circuits requiring reliable auxiliary switching. It operates on a 100–127 VAC coil and provides 3 normally open and 2 normally closed contacts. The compact design supports DIN rail or screw mounting.

Allen-Bradley 1492-FB3C30-L is a 3-pole Class CC fuse holder for the 1492 Wiring System, rated 30A and up to 600V AC, featuring an integrated LED indicator for clear fuse status visibility.

ABB Steel City 72171 is a 4-11/16 in square steel electrical box with a 2-1/8 in depth and 42 cu in capacity. Constructed from pre-galvanized steel, it features eccentric knockouts for 1/2 in and 3/4 in conduit and is designed for commercial conduit wiring installations.

The Allen-Bradley 815-BOV4 is a manual reset overload relay designed for motor control applications. It provides thermal overload protection using a eutectic alloy mechanism and supports up to 27 A at 600 V AC. Suitable for use with Allen-Bradley motor control systems.

OMRON PTF11PC 11-pin relay socket lot with 10A rating and screw-terminal wiring layout, ready for relay socket replacement, panel support, or control component stocking.

The ABB DSQC 504 Base Connector Unit is a passive I/O interface module used in ABB robot controller systems. It functions as a centralized backplane for connecting axis control modules, power supplies, safety wiring, and external I/O devices within S4, S4C, and S4C+ controller cabinets.

Introducing the OWON ODP3031: Precision Power Control, Redefined.

Introducing the OWON ODP3032: Precision Power Control Redefined.

Hubbell CS320I is a commercial-specification 3-way toggle switch rated 20A at 120/277V AC. It is side wired only, supports #14 to #10 AWG copper wire, and features an ivory nylon toggle with thermoplastic construction.