Search results for: 'connect'

Turck MK91-12-R/115VAC is a 1-channel level controller for electrode-based level monitoring with 115VAC supply, relay output switching, and adjustable operating settings for control tasks.

The Mitsubishi CP30-BA 1-Pole 10A M-Curve Circuit Protector is a compact supplementary circuit breaker designed for protection of low-capacity control circuits, motors, and transformers. It supports AC 250 V and DC 65 V operation and mounts on a standard 35 mm DIN rail using screw terminals.

The Mitsubishi CP30-BA 1-Pole 7A M-Curve Circuit Protector is a compact hydraulic-magnetic circuit protector designed for supplementary protection of low-capacity industrial control circuits. It supports AC 250 V and DC 65 V operation and uses an M-curve trip characteristic suitable for moderate inrush loads.

The Mitsubishi CP30-BA 1-Pole 3A M-Curve Circuit Protector is a compact hydraulic-magnetic supplementary protector designed for low-capacity control circuits. It supports AC 250 V and DC 65 V operation, offers 2.5 kA breaking capacity, and mounts on standard DIN rail using screw terminals.

The Telemecanique GV2-AE11 is a front-mounted auxiliary contact block with 1 normally open and 1 normally closed contact. Designed for TeSys GV2 and GV3 motor circuit breakers, it provides status signaling and control feedback using screw clamp terminals.

The General Electric TEY120 is a 1-pole, 20-amp molded case circuit breaker designed for 277 VAC systems. It features a bolt-on mounting style, thermal magnetic protection, and LI trip functions. Rated at 14 kAIC at 277 V, it is commonly used in commercial and industrial lighting panel applications.

The WAGO 750-517 is a 2-channel digital output module with potential-free relay contacts for industrial automation systems. It features two changeover relays, supports up to 250 VAC or 300 VDC switching, and mounts on a DIN-35 rail using CAGE CLAMP® connections.

The HP A4978-62025 is an LCD and power switch subassembly mounted in a molded plastic bracket. The assembly integrates a monochrome LCD display and a front-panel power switch with a fixed ribbon cable terminating in a D-sub style connector. Identified by assembly label A4978-62025.

General Electric THQL32070 70A 3-Pole Breaker: Reliable thermal-magnetic protection with plug-in design, HACR rating, and quick-make, quick-break mechanism.

Allen-Bradley 871A-TS5-DM1 M12 5-Pin field-attachable connector offers reliable IP67 wiring for sensors and automation devices, supporting 6–8 mm cables.

Siemens SITOP select diagnosis module 6EP1961-2BA00 for 24 V DC systems. 4-channel electronic module (4x 10 A) that distributes and monitors load current with adjustable trip thresholds from 2–10 A. Supports selective channel shutdown on overload/short circuit with common signaling contact.

Leviton 16342-W Decora Plus duplex receptacle delivers a 20A, 125V NEMA 5-20R wiring solution with side-wire termination, self-grounding design, and white smooth-face Decora styling.

GE C208LSIR MicroVersaTrip Plus Trip Unit delivers replacement circuit breaker trip control with front-panel setup access, status display, and 800A sensor designation for compatible GE breaker systems.

Siemens 771-8STF1 current-to-pneumatic (I/P) transducer converts a DC mA input to a proportional pneumatic output. Configuration: 4–20 mA input, 3–27 psig output, standard output capacity, terminal strip, intrinsically safe approval.

The Siemens TA2J6500 is an aluminum body 2-barrel lug accessory for use with 2- or 3-pole 200A–400A JD and LD frame molded case circuit breakers. It supports copper conductors from 3/0 AWG to 500 kcmil and aluminum conductors from 4/0 AWG to 500 kcmil, and is suitable for both line and load side connections.

The Square D 8501NR61 is an 11-pin plug-in relay socket designed for use with compatible Square D relays and timers. It features single-tier screw clamp terminals and supports both panel and DIN rail mounting for industrial control applications.

The Allen-Bradley 800T-XA2 Series D is a 30 mm industrial control contact block featuring two normally open contacts and an A600 NEMA pilot duty rating. Designed for use with Bulletin 800T operators, it provides screw-terminal connections and base-mount installation for industrial control panels.

United Conveyor Supply Co 34592-1 NEMA 4 Junction Box offers durable, weatherproof protection for industrial wiring and controls in harsh indoor or outdoor environments.

Introducing the OWON SP3101 - Your Compact Power Solution.

Hubbell 0740-113-33 delivers straight liquidtight cord-grip strain relief for insulated cables, combining stainless steel mesh, nylon body construction, and a neoprene bushing for dependable cable management.

SOR 4N3-KK4-N1-C1A-ZZ pressure switch delivers adjustable 2-25 PSI switching for industrial pressure control, with 750 PSI over range and 1000 PSI proof pressure for monitored process applications.

The Allen-Bradley 1606-XLE480EP is a 24V DC, 20A (480W) switched mode power supply from the 1606-XLE Essential series. It supports 100–240V AC input and 110–150V DC input, features adjustable 24–28V output, 20% power reserve, DC OK relay contact, and screw terminals for DIN rail industrial installation.

The ABB 1SVR427014R0000 CP-S 24/5.0 is a 120 W DIN rail switch mode power supply delivering 24 V DC at 5 A. Designed for industrial environments, it supports wide AC and DC input ranges, adjustable output voltage, high efficiency, and integrated protection features for reliable system power.