Search results for: 'ins it's it'

Allen-Bradley 1492-FB3J60-L fuse holder provides secure Class J fuse mounting for control applications, supporting reliable protection in industrial systems.

General Electric THQL2120 delivers reliable 20A, 2-pole protection for GE Q-Line load centers. Ideal for residential circuits and 240V equipment with plug-in installation.

Leviton 3331-C delivers a durable 30A industrial locking plug with non-NEMA 3-wire design, solid brass blades, and tough nylon housing for secure equipment power.

The Telemotive E7207-1 Circuit Board is an industrial automation component used in Telemotive radio control systems. Identified by part number E7207-1, this board is commonly applied in industrial control environments including crane and hoist remote control systems.

The TCI AS-B875-002 KLC25BE dv/dT Guard Output Filter is designed to protect AC motors driven by PWM variable frequency drives. Rated for 25 A, 3-phase, 480 V systems, it limits voltage spikes and dV/dt effects that can damage motor insulation and cabling.

Phoenix Contact 2832771-HW16 FL Switch SF 8TX delivers reliable 8-port 10/100 Mbps industrial Ethernet expansion with plug-and-play setup and DIN-rail mounting.

The Leviton 010-80701 is a 1-gang black toggle wallplate constructed from molded thermoplastic nylon. Designed for standard wall box installations, it provides a durable, smooth-finish cover for single toggle switches in residential or commercial environments.

OmniOn Power 2007001F is a control and monitoring circuit board for Infinity D DC power systems, supporting reliable telecom and data-center power management.

The Thomas & Betts Steel City BL113 is a 1-inch snap-in knockout blank made from zinc-plated steel for commercial electrical installations. Designed to close unused knockout openings in steel boxes, it provides a secure, tool-free fit for Rigid and IMC conduit applications.

Leviton 5461 is a brown industrial-grade single straight blade receptacle rated 20A at 250V. It features a NEMA 6-20R configuration, self-grounding design, impact-resistant nylon body, and back or side wiring for #14–#10 AWG copper conductors.

The General Electric CR104PLT43 is a 30.5mm push-to-test indicator light designed for 240V AC industrial automation systems. Part of the GE CR104P series, it utilizes a resistor power supply and supports machine-tool and control panel applications where manual lamp verification is required.

The Mitsubishi CP30-BA 1-Pole 5A M-Curve Circuit Protector is a compact DIN-rail-mounted supplementary protector designed for low-capacity control circuits. It features a medium-speed hydraulic-magnetic tripping characteristic, 5 A current rating, and supports AC 250 V or DC 65 V operation in industrial control panels.

The Siemens 3SU1400-1AA10-1BA0 is a SIRIUS ACT contact module with one normally open contact. It features screw terminals and a snap-on design for front plate mounting behind compatible actuators. Designed for industrial control and signaling applications requiring reliable signal switching.

Allen Bradley 1485P-P1R5-DR5 DeviceNet T-Port Connector provides reliable M12 trunk-to-drop branching for round media networks, ensuring durable industrial connectivity.

Allen-Bradley 100-DS1-20 auxiliary contact block expands control contacts on 100-D contactors, delivering status signaling for industrial motor control.

Allen-Bradley 871A-TS5-D1 delivers a durable, IP67 M12 5-pin field-attachable connector for custom automation cable builds, ensuring reliable DC Micro sensor wiring.

The Allen-Bradley 800S-R2SX is a standard-duty, two-position selector switch designed for surface-mount industrial control applications. It features a maintained ON/OFF knob operation, screw terminal wiring, and a NEMA Type 1 enclosure for general-purpose environments.

Phoenix Contact 2832771-HW15 FL Switch SF 8TX delivers reliable 8-port industrial Ethernet expansion with 10/100 Mbps speeds and DIN-rail mounting for automation networks.

Siemens 6ES7 972-0BA60-0XA0 PROFIBUS DP connector offers FastConnect wiring, 35° cable exit, and integrated termination for reliable RS485 network installations.

Killark Hubbell VMG17 prismatic glass globe delivers Type V light distribution for V and VM series hazardous luminaires, offering durable, clear glass performance for harsh environments.

Phoenix Contact QUINT-DIODE/12-24DC/2X20/1X40 is a DIN-rail mounted redundancy diode module for 12–24 V DC systems. It decouples parallel power supplies to increase system availability, supporting 2×20 A redundancy or 1×40 A increasing power operation.

ABB Steel City 72171 is a 4-11/16 in square steel electrical box with a 2-1/8 in depth and 42 cu in capacity. Constructed from pre-galvanized steel, it features eccentric knockouts for 1/2 in and 3/4 in conduit and is designed for commercial conduit wiring installations.

Allen-Bradley 194R-NN030P3 delivers reliable 30A non-fused power isolation for industrial panels, supporting safe lockout/tagout and rotary disconnect operation.

The Eaton P1-25/V/SVB is a 25 A, three-pole main switch from the Eaton Moeller® P1 series designed for rear mounting applications. It features a door-coupling rotary drive with a red rotary handle and yellow locking ring, and supports emergency switching off functionality. The switch is rated up to 690 V AC, provides IP65 front protection, and is lockable in the 0 (Off) position for secured isolation.

The MTL IOP32D is a DIN-rail mounted surge protection device designed to protect digital and analogue I/O circuits. It provides surge protection for two independent loops (four wires) using a hybrid protection circuit rated up to 20 kA. The device is suitable for industrial control and instrumentation applications and is certified for use in hazardous areas.