Search results for: 'rated stock'

The MAC Valves PME-501CC is a solenoid pilot valve labeled 24 VDC and 6.0 watts. The valve body marking indicates a pressure range of 20–150 PSI. The unit includes an attached hardwired cable with flying leads.

The Telemecanique XSAV32373 is an inductive proximity sensor designed for rotation monitoring applications. It features a cylindrical M30 nickel plated brass housing, 10 mm nominal sensing distance, PNP output with 1 NC function, and operates on 12 to 48 V DC. The sensor includes a fixed 2 meter cable connection and is rated IP67.

The SSAC FS165-30T is a solid state beacon flasher designed for tower and obstruction lighting systems. Operating on 230VAC, it supports up to 5000W loads and provides an OFF-first flash sequence at 30 flashes per minute. Encapsulated construction supports demanding environments.

Eaton WMZS1B10 10A B-curve breaker delivers reliable supplementary protection for control panels, electronics, and DIN-rail systems with fast, current-limiting performance.

Square D 9001SKP1C9 delivers 30 mm pilot light signaling with a red domed plastic lens, incandescent BA 9s lamp, 110–120 V AC supply, and screw clamp terminals.

Allen-Bradley 100-C12D10 IEC magnetic contactor delivers reliable 12A motor control with 3-pole switching and integrated auxiliary contact, supporting 110V/120V coil operation for industrial control systems.

Mitsubishi TH-T25KP thermal overload relay provides 3-element overload protection with a 1.7 A heater designation, 1.4–2 A setting range, and auxiliary NO/NC contacts for industrial motor control circuits.

The Fluke CV300 is a 75 mm ClirVu® infrared window with a hand turn door latch, designed to improve electrical inspection safety. It enables thermal inspections without opening energized panels and supports fast single-hole installation while maintaining enclosure ratings.

The TCI AS-B875-002 KLC25BE dv/dT Guard Output Filter is designed to protect AC motors driven by PWM variable frequency drives. Rated for 25 A, 3-phase, 480 V systems, it limits voltage spikes and dV/dt effects that can damage motor insulation and cabling.

The C3 Controls DDS2-340-DHGRY is a non-fused, 40 amp, 3-pole disconnect switch designed for door-mount applications. It features a red/yellow rotary operating handle and an IP65 ingress protection rating for use in industrial control environments requiring reliable circuit isolation.

R. STAHL INTRINSPAK 9001/02-093-030-10 safety barrier for industrial control and intrinsically safe interface applications, identified with 250V and 30 mA raw-data rating information.

The IDEC CS-10 ACSSO contact block is a cam switch component configured with one normally open contact and circuit designation C-2004. It is rated for 600 V insulation voltage and 10 A thermal current, utilizes silver contacts, and is designed for industrial control applications requiring reliable mechanical switching performance.

Thomas & Betts MSC20 motor stub splice insulators provide insulated protection for compatible splice connectors up to 600 V and 90°C using modified neoprene construction for electrical connection insulation applications.

Hubbell HBL7593 twist-lock connector delivers secure 15A 125V power connectivity with NEMA ML-2R configuration for reliable 2-pole 3-wire grounding applications.

Hubbell HBL2426 is a 20A, 3-phase 250V AC Insulgrip flanged receptacle with a 3-pole, 4-wire grounding configuration, backwired terminations, and nylon housing for Twist-Lock power connections.

Eaton AC222URNMP-A2 provides a durable 60A non-fusible AC disconnect for safe service shutdown of outdoor HVAC units, featuring a NEMA 3R UV-resistant enclosure.

Siemens Q350 50A breaker provides reliable 3-pole protection for Siemens/ITE load centers, offering durable thermal-magnetic performance with plug-in QP design.

Protect your power electronics with the Mersen W300008 PC31UD69V630TF  Protistor® Size 31 aR Fuse—630A, high-speed, and built for reliable semiconductor protection at up to 700VAC!

Allen-Bradley 193-T1AB48 bimetallic overload relay delivers adjustable 3.5-4.8 A motor overload protection with Class 10 tripping, phase-loss sensitivity, and manual or automatic reset for motor starter assemblies.

Leviton CR20-I commercial-grade duplex receptacle rated 20A, 125V in NEMA 5-20R configuration. Ivory narrow-body design with side-wire termination and self-grounding clip. Qty 5.

The Emerson DeltaV KL4502X1-BA1 (12P4990) is a CHARM standard terminal block designed for use with the DeltaV S-series Electronic Marshalling system. It provides the physical interface for field wiring and supports installation of CHARM (Characterization Module) components within DeltaV control architectures.

Allen-Bradley 1492-CB1-H010 supplementary protector delivers 1-amp single-pole thermal-magnetic overcurrent protection for industrial control circuits using DIN rail mounting.

Allen-Bradley 1492-FB3C30-L is a 3-pole Class CC fuse holder for the 1492 Wiring System, rated 30A and up to 600V AC, featuring an integrated LED indicator for clear fuse status visibility.