Search results for: 'the the'

Eaton PKZM0-6,3 manual motor protector with attached NHI21-PKZ0 auxiliary contact block provides manual motor switching, overload protection, and control-circuit status contact expansion for low-voltage motor control assemblies.

The Telemecanique XSAV32373 is an inductive proximity sensor designed for rotation monitoring applications. It features a cylindrical M30 nickel plated brass housing, 10 mm nominal sensing distance, PNP output with 1 NC function, and operates on 12 to 48 V DC. The sensor includes a fixed 2 meter cable connection and is rated IP67.

Siemens POL906.00/MCQ Communication Module supports POL6xx-connected control architecture in a compact modular format, with visible LON-SCC identification plus on-product IP20, -40 to 70, 80 mA, and 0.4 W markings.

Burndy YA25 502215 HYLUG compression lug supports 1/0 AWG copper conductors with a one-hole long-barrel design and 5/16 in stud size for secure electrical terminations.

The Murr Elektronik 23050 is a three-phase RC motor suppressor designed to reduce induced voltage peaks in AC motor applications. Rated for up to 575 VAC at 50/60 Hz and 4 kW engine power, it supports star-connected RC suppression and installation close to the interference source.

The WAGO 750-517 is a 2-channel digital output module with potential-free relay contacts for industrial automation systems. It features two changeover relays, supports up to 250 VAC or 300 VDC switching, and mounts on a DIN-35 rail using CAGE CLAMP® connections.

The Honeywell HPK2-3 51401583-100 Enhanced Process Network Interface (EPNI) board is a core logic component used within Network Interface Modules in Honeywell TDC 3000 Distributed Control Systems. It supports data communication between control networks in industrial automation environments.

Emerson Ovation 1C31189G31 Speed Detector Module for the Ovation DCS. This module monitors rotating equipment speed and converts sensor input into digital data for real-time control, monitoring, and diagnostics.

Hubbell WP8M weatherproof 1-gang outlet box hood provides protective coverage for vertical electrical box installations with a hinged gray cover and gasketed weather-resistant design.

The Potter & Brumfield KUP14D15 is an enclosed electromechanical control relay with a 12 VDC coil and a 3PDT (3 Form C) contact configuration. This relay features an 11-pin blade terminal base and a clear polycarbonate dust cover for component visibility.

Eaton AC222URNMP-A2 provides a durable 60A non-fusible AC disconnect for safe service shutdown of outdoor HVAC units, featuring a NEMA 3R UV-resistant enclosure.

The Allen-Bradley 815-BOV4 is a manual reset overload relay designed for motor control applications. It provides thermal overload protection using a eutectic alloy mechanism and supports up to 27 A at 600 V AC. Suitable for use with Allen-Bradley motor control systems.

The Honeywell 30731808-001 Regulator Card is a power regulation module used in Honeywell industrial control systems. It converts a +24 VDC backplane input into regulated +5 VDC, +12 VDC, and −12 VDC outputs to support system modules within compatible control chassis.

GE C208LSIR MicroVersaTrip Plus Trip Unit delivers replacement circuit breaker trip control with front-panel setup access, status display, and 800A sensor designation for compatible GE breaker systems.

The Siemens 75D73070C AC coil set of 2 offers clearly labeled 50/60 Hz voltage ranges and V/W terminal markings for starter and contactor replacement needs.

Emerson KJ3222X1-BK1 is a DeltaV S-Series analog input module with 8 channels for 4-20 mA HART signals. The module is identified on manufacturer documentation as AI 8 CH 4-20mA HART CARD.

The Phoenix Contact RAD-OUT-4A-I is a compact analog extension module providing four independent 4–20 mA current outputs. Designed for DIN rail mounting, it operates from a 9–30 V DC supply via a bus foot connector and supports screw terminal wiring. The module is UL listed for Class I, Division 2 hazardous locations and CE compliant.

The HOFFMAN A24246GSC electrical enclosure delivers screw-cover, gasketed protection for wiring, junction, pull, and terminal box applications exposed to windblown dust and rain, with galvanized steel construction and IP66 performance.

Eaton XTCE012B10TD contactor delivers reliable 3-pole motor control with a 24V DC coil, 12A rating, and IEC compatibility for XT series motor starter systems.

Phoenix Contact 5604123 is a VARIOFACE passive module providing 16-channel fused output for structured signal interfacing between control systems and field wiring.

The General Electric 8G163WF is a fluorescent lamp ballast labeled for 277-volt operation and F48CW lamp applications. This unit is identified directly from manufacturer carton labeling and is supplied as a single ballast. No additional accessories or documentation are included.

Vega D5.1/2.N Ex d Stopping Plug seals unused 1/2-14 NPT entries in hazardous-area enclosures with nickel plated brass construction, flush external installation, and certified flameproof protection.

The Siemens B220 2-Pole breaker delivers reliable 20A thermal-magnetic protection for 120/240V systems, ideal for Siemens P1 panelboards and BL-series load centers.