Search results for: 'application in'

The Allen-Bradley 800B-N5W is a white LED lamp designed for use with Bulletin 800B 16 mm illuminated push-button and pilot light operators. Rated for 120V AC operation, this LED bulb provides consistent white illumination with low power consumption and extended service life in industrial control panel applications.

Introducing the OWON SPE6103 - Precision Power Supply for Professionals.

The Appleton ST-4575 is a 3/4" 45° liquidtight connector designed for use with liquidtight flexible metal conduit (LFMC). This ST Series plain throat fitting provides a dependable connection while sealing out oil, water, dust, dirt, and fumes. Constructed with a malleable iron body and finished with zinc electroplate, chromate, and epoxy powder coat, it is suitable for wet locations and Class I, Division 2 environments.

The Leviton 2453 is a 20 Amp, 277/480 Volt AC locking connector with a NEMA L19-20R configuration. It features a 4-pole, 4-wire, non-grounding design for 3-phase WYE applications. The connector uses an impact-modified nylon body with solid brass blades and contacts.

Introducing the OWON SPE3103 - Precision Power Supply for Your Every Need.

Introducing the OWON SPE6053 - Compact Precision Power Supply for Your Needs.

Introducing the OWON SP3103 - Your Compact Powerhouse.

Thomas & Betts Red Dot 2CCD weatherproof two-gang duplex receptacle cover delivers die-cast metallic protection for dual duplex outlets with gasketed sealing and device-mount installation.

Square D 2510KG1 manual switch delivers reliable 30A control for single-phase systems with a 2-pole toggle design and non-reversing operation in a compact NEMA 1 enclosure.

Schneider Electric CAD50G7 is a TeSys Deca control relay with five normally open contacts and a 120 VAC 50/60 Hz control coil. Rated up to 690 VAC and 10 A, it supports DIN rail or panel mounting and is designed for industrial control circuit applications.

Introducing the OWON ODP3032: Precision Power Control Redefined.

Thomas & Betts 5257 is a 2 in non-insulated 90° liquidtight conduit connector for liquidtight flexible metallic conduit, with NPT threads and malleable iron body construction. 

Eaton E30AD pushbutton operator delivers maintained and release control in a compact two-button configuration for industrial control panels and multifunction applications.

The Murr Elektronik 23050 is a three-phase RC motor suppressor designed to reduce induced voltage peaks in AC motor applications. Rated for up to 575 VAC at 50/60 Hz and 4 kW engine power, it supports star-connected RC suppression and installation close to the interference source.

The WAGO 750-517 is a 2-channel digital output module with potential-free relay contacts for industrial automation systems. It features two changeover relays, supports up to 250 VAC or 300 VDC switching, and mounts on a DIN-35 rail using CAGE CLAMP® connections.

The Emerson Ovation WH5D-2FF / 1X00416H03 power supply module provides regulated 24 VDC output for Ovation distributed control system backbones. The enclosed industrial module supports high-current control applications using wide-range AC or DC input power.

The Struthers-Dunn W88AHPX-36 is a hermetically sealed 3PDT plug-in relay from the 88HP Series, rated 10A and configured for 120VAC operation. It features an 11-pin octal base and a sealed gray metal enclosure designed to prevent contamination and corrosion.

The Hammond Power CRX06D1BC is a three-phase iron core line reactor rated for 600 VAC and 6.1 A. Part of the HPS Centurion® R Series, it provides controlled impedance to mitigate harmonics and electrical transients in AC drive systems operating at 50/60 Hz.

The Eaton H2006B-3 is a Freedom NEMA heater coil set designed for thermal overload protection in motor control applications. This Class 20 standard trip heater pack supports selectable full load current settings from 1.79A to 2.9A via dial positions A–D and is supplied as a factory-calibrated set of three elements.

Introducing the OWON P4603: Precision Power, Compact Design.

Allen-Bradley 194R-NJ030P3 fused rotary disconnect switch offers 30A, 600V isolation for industrial panels, supporting Class CC/J fuses and high-fault protection.

R. STAHL INTRINSPAK 9001/02-093-030-10 safety barrier for industrial control and intrinsically safe interface applications, identified with 250V and 30 mA raw-data rating information.

The IDEC CS-10 ACSSO contact block is a cam switch component configured with one normally open contact and circuit designation C-2004. It is rated for 600 V insulation voltage and 10 A thermal current, utilizes silver contacts, and is designed for industrial control applications requiring reliable mechanical switching performance.