Search results for: 'key and que kits'

The Murr Elektronik 23050 is a three-phase RC motor suppressor designed to reduce induced voltage peaks in AC motor applications. Rated for up to 575 VAC at 50/60 Hz and 4 kW engine power, it supports star-connected RC suppression and installation close to the interference source.

The Ferraz Shawmut UltraSafe USCC2 P216489 is a 2-pole modular fuse holder rated for 30A and 600 VAC/VDC for Class CC fuses. Designed for DIN rail mounting, it features IP20 finger-safe protection, pressure plate terminals, and a 200 kA SCCR for industrial control panel applications.

Moore Industries DPS/24DC/240MA/117AC/-FA(DIN) is a compact DIN rail power supply delivering 24 VDC at 240 mA from 117 VAC input, with adjustable voltage, current limit control, and output status indication.

The C3 Controls DDS2-340-DHGRY is a non-fused, 40 amp, 3-pole disconnect switch designed for door-mount applications. It features a red/yellow rotary operating handle and an IP65 ingress protection rating for use in industrial control environments requiring reliable circuit isolation.

SCHMERSAL SRB301LCI-24V: Reliable 24V safety controller relay with 3 safety contacts, signaling output, and advanced diagnostics for industrial protection.

Allen-Bradley 1489-M1C100 miniature circuit breaker delivers 10 A, 1-pole thermal-magnetic branch circuit protection with a C trip curve for control panels and IEC applications.

The MTL IOP32D is a DIN-rail mounted surge protection device designed to protect digital and analogue I/O circuits. It provides surge protection for two independent loops (four wires) using a hybrid protection circuit rated up to 20 kA. The device is suitable for industrial control and instrumentation applications and is certified for use in hazardous areas.

The Siemens 3TF3000-0A is a 3-pole AC contactor from the 3TF30 series rated 9 A (AC-3 at 380/400 V) with insulation voltage up to 690 V. Designed for motor control applications at 50/60 Hz, it complies with IEC 947 and VDE 0660 standards.

Allen-Bradley 700-C1 rear deck contact cartridge delivers reliable switching functionality for Bulletin 700 relay systems, supporting consistent electrical contact operation in control circuit configurations.

Introducing the OWON ODP6062: Elevate Your Power Control.

Introducing the OWON ODP6033: Precision Power for Your Demanding Applications.

Introducing the OWON SPE6053 - Compact Precision Power Supply for Your Needs.

Introducing the OWON ODP3122: Precision Power Control Elevated.

The Mitsubishi CP30-BA 1-Pole 10A M-Curve Circuit Protector is a compact supplementary circuit breaker designed for protection of low-capacity control circuits, motors, and transformers. It supports AC 250 V and DC 65 V operation and mounts on a standard 35 mm DIN rail using screw terminals.

The Fluke CV300 is a 75 mm ClirVu® infrared window with a hand turn door latch, designed to improve electrical inspection safety. It enables thermal inspections without opening energized panels and supports fast single-hole installation while maintaining enclosure ratings.

Littelfuse LPSC-ID is a 600 V AC/DC, 30 A Class CC fuse holder for branch circuit protection, combining dead front touch-safe construction, DIN-rail mounting, and blown-fuse indication above 80 V.

Phoenix Contact 2832771-HW16 FL Switch SF 8TX delivers reliable 8-port 10/100 Mbps industrial Ethernet expansion with plug-and-play setup and DIN-rail mounting.

The Mitsubishi CP30-BA 1-Pole 3A M-Curve Circuit Protector is a compact hydraulic-magnetic supplementary protector designed for low-capacity control circuits. It supports AC 250 V and DC 65 V operation, offers 2.5 kA breaking capacity, and mounts on standard DIN rail using screw terminals.

The Eaton Bussmann DFJ-30 is a 30A Class J high speed, current-limiting drive fuse designed to protect AC and DC drives and power semiconductor devices. Rated up to 600 Vac and 450 Vdc, it provides very low I²t let-through energy and high interrupting capacity for demanding industrial applications.

Littelfuse LPSC-ID is a Class CC fuse holder rated 600V AC/DC and 30A, built for panel protection with blown fuse indication, line/load labeling, and DIN rail mounting.

Mersen / Ferraz Shawmut A155F2D0R0-125E is a 15.5 kV, 125E medium-voltage, E-rated Amp-Trap® CS-3 series ferrule-mounted fuse. Designed for transformer and distribution protection, it provides current-limiting performance with visual blown-fuse indication and compatibility with standard spring-reinforced clips.

The Mitsubishi CP30-BA 1-Pole 5A M-Curve Circuit Protector is a compact DIN-rail-mounted supplementary protector designed for low-capacity control circuits. It features a medium-speed hydraulic-magnetic tripping characteristic, 5 A current rating, and supports AC 250 V or DC 65 V operation in industrial control panels.

Schneider Electric Telemecanique LC1 D09 10 is a 3-pole magnetic contactor for AC motor control and circuit switching, with an integrated 1 NO auxiliary contact and motor-starting capability up to 4 kW at 400V.

Leviton 4779-C delivers industrial-grade 15A, 277V NEMA L7-15R locking connectivity with grounding, screw termination, and rugged Black & White Series construction for dry electrical environments.