Search results for: 'ins it's it'

The Tristar S0803-0000 is a compact 12V DC white LED indicator designed for 1/2" hole mounting. This polarity-sensitive LED draws approximately 0.02–0.03 amps and consumes about 0.25 watts. The unit features a 1/2" diameter body with a 1.75" housing length and is suitable for low-draw DC indicator applications.

The Curtis Industries CUS8 is an 8-pin octal relay socket base designed for industrial control applications. Rated at 10A and up to 300V, it provides a standardized receptacle for compatible 2PDT octal relays or timers and supports secure screw-terminal wiring.

The Molex 1300140037 is a 7-pole female circular connector pigtail designed for industrial electrical connections. It features a straight orientation, front panel mount configuration, and a 1/2-14 NPT mounting thread. The assembly is terminated with UL 1015 16 AWG lead wires and housed in a zinc die-cast body with black epoxy finish for durability.

ABB TB806 Bus Inlet is a Modulebus extension cable adaptor with a D-sub 25 male connector. It is used with the TK801 extension cable to extend the ModuleBus in ABB S800 I/O systems. One adaptor is required per extension cable.

Allen-Bradley 1492-FB2C30-L fuse holder delivers Class CC 30A protection with an LED fault indicator, DIN-rail mounting, and safe, compact industrial performance.

The Turck B8241-0/PG9 is a field-wireable M12 right-angle, 4-position female connector designed for sensor and actuator wiring in industrial automation. It uses a screw terminal connection, supports 250 V at 4 A, and accepts PG9 cable glands for secure, sealed installations.

The Honeywell 3PA2 is a zinc limit switch enclosure designed for use with basic switches. It provides a durable gray chassis-style housing with screw mounting for industrial applications requiring an enclosed switch case. Intended to protect switch terminals and internal mechanisms.

The ABB 1SVR430841R0200 CM-SRS.11 provides TRMS current monitoring with adjustable thresholds and multiple ranges, ideal for single-phase industrial control protection.

Light Efficient Design LED-8033E57 delivers 38W LED HID retrofit performance with 5700K daylight output, replacing 175W HID systems for post top and area lighting applications across 120–277V systems.

The Mitsubishi CP30-BA 1-Pole 10A M-Curve Circuit Protector is a compact supplementary circuit breaker designed for protection of low-capacity control circuits, motors, and transformers. It supports AC 250 V and DC 65 V operation and mounts on a standard 35 mm DIN rail using screw terminals.

The Allen-Bradley 800B-N5W is a white LED lamp designed for use with Bulletin 800B 16 mm illuminated push-button and pilot light operators. Rated for 120V AC operation, this LED bulb provides consistent white illumination with low power consumption and extended service life in industrial control panel applications.

Eaton AC222URNMP-A2 provides a durable 60A non-fusible AC disconnect for safe service shutdown of outdoor HVAC units, featuring a NEMA 3R UV-resistant enclosure.

The Appleton ST-4575 is a 3/4" 45° liquidtight connector designed for use with liquidtight flexible metal conduit (LFMC). This ST Series plain throat fitting provides a dependable connection while sealing out oil, water, dust, dirt, and fumes. Constructed with a malleable iron body and finished with zinc electroplate, chromate, and epoxy powder coat, it is suitable for wet locations and Class I, Division 2 environments.

The Leviton 2453 is a 20 Amp, 277/480 Volt AC locking connector with a NEMA L19-20R configuration. It features a 4-pole, 4-wire, non-grounding design for 3-phase WYE applications. The connector uses an impact-modified nylon body with solid brass blades and contacts.

The Telemotive E7150-1-B is a radio remote control receiver module used in industrial wireless control systems. It functions as the fixed receiving unit that interprets signals from a paired handheld transmitter to control machinery. The module operates as part of a Telemotive radio control system and includes diagnostic indicators for system monitoring and troubleshooting.

The FANUC A06B-6114-K213/E is an industrial connector plug used for encoder or brake connections on FANUC servo motors. Manufactured for CNC and automation systems, this connector is supplied as a right-angle style plug and is identified by the FANUC part number A06B-6114-K213/E.

The EMI Corp Gimatic 6753 SB2C Sensor Junction Box enables connection of up to two sensors with series or parallel wiring, PNP/NPN signal conversion, dry contact I/O, signal regeneration, and LED status indication for efficient automation integration.

The Phoenix Contact RAD-OUT-8D-REL is an 8-channel digital relay output extension module for Radioline wireless systems. It provides floating relay contacts for reliable signal switching and supports DIN rail mounting in industrial automation environments.

The Advance L-220-F is a magnetic reactor ballast designed to operate two 15W or 20W preheat fluorescent lamps at 120V AC, 60 Hz. It regulates lamp current using an inductive core and requires external starters for lamp ignition in preheat fluorescent systems.

The Murr Elektronik 23050 is a three-phase RC motor suppressor designed to reduce induced voltage peaks in AC motor applications. Rated for up to 575 VAC at 50/60 Hz and 4 kW engine power, it supports star-connected RC suppression and installation close to the interference source.

The WAGO 750-517 is a 2-channel digital output module with potential-free relay contacts for industrial automation systems. It features two changeover relays, supports up to 250 VAC or 300 VDC switching, and mounts on a DIN-35 rail using CAGE CLAMP® connections.

The Emerson Ovation WH5D-2FF / 1X00416H03 power supply module provides regulated 24 VDC output for Ovation distributed control system backbones. The enclosed industrial module supports high-current control applications using wide-range AC or DC input power.

The Delta AFB1224HE is a 24V DC brushless axial cooling fan designed for reliable airflow in electronic and industrial equipment. It features dual ball bearings, locked rotor protection, and a 120 × 120 × 38 mm frame for consistent thermal management applications.