Search results for: 'key and que key'

Johnson Controls Metasys ORL101 Output Relay Module: Reliable control for field devices. Features magnetic latching relay, HOA switch, and durable 120VAC performance.

Modicon AS-P120-000 delivers reliable 24VDC power for Compact 984 PLC systems, supporting stable control performance and legacy system continuity.

Macro Sensors LVC-2500 Low Voltage Conditioner delivers DIN-rail LVDT and half-bridge signal conditioning with selectable 3 kHz, 5 kHz, or 10 kHz excitation, adjustable gain and offset, voltage and current outputs, and link-selectable analog math functions.

The Weidmüller 1122-8800-00 TRZ 24VDC 1CO is a slim DIN rail relay interface module with a 24 V DC control voltage and one changeover (SPDT) contact. It supports up to 6 A switching current and uses tension-clamp connections for secure, screwless wiring in control cabinets.

The Schneider Electric GV3P40 is a TeSys Deca motor circuit breaker designed for motor protection applications. This 3-pole device features a thermal-magnetic trip unit with an adjustable thermal protection range of 30 to 40 A and a rated current of 40 A. It supports AC networks up to 690 V at 50/60 Hz and provides defined short-circuit breaking capacities in accordance with IEC 60947 standards.

Total Source TSA/6325G1 175A connector delivers high-current electrical connection up to 600V with durable gray SB-style housing for secure power transfer.

Amperite 115C60 thermal time delay relay delivers fixed 60-second Delay on Break control with 115V AC/DC input, SPST-NC contacts, and a 3A resistive rating.

Light Efficient Design LED-8033E57 delivers 38W LED HID retrofit performance with 5700K daylight output, replacing 175W HID systems for post top and area lighting applications across 120–277V systems.

The Murr Elektronik 23050 is a three-phase RC motor suppressor designed to reduce induced voltage peaks in AC motor applications. Rated for up to 575 VAC at 50/60 Hz and 4 kW engine power, it supports star-connected RC suppression and installation close to the interference source.

The Ferraz Shawmut UltraSafe USCC2 P216489 is a 2-pole modular fuse holder rated for 30A and 600 VAC/VDC for Class CC fuses. Designed for DIN rail mounting, it features IP20 finger-safe protection, pressure plate terminals, and a 200 kA SCCR for industrial control panel applications.

Moore Industries DPS/24DC/240MA/117AC/-FA(DIN) is a compact DIN rail power supply delivering 24 VDC at 240 mA from 117 VAC input, with adjustable voltage, current limit control, and output status indication.

The C3 Controls DDS2-340-DHGRY is a non-fused, 40 amp, 3-pole disconnect switch designed for door-mount applications. It features a red/yellow rotary operating handle and an IP65 ingress protection rating for use in industrial control environments requiring reliable circuit isolation.

Steel City RSL 8 raised device cover provides a durable, galvanized 4-11/16" square solution for mounting two duplex receptacles in commercial installations.

Allen-Bradley 1489-M1C100 miniature circuit breaker delivers 10 A, 1-pole thermal-magnetic branch circuit protection with a C trip curve for control panels and IEC applications.

Eaton FH80 overload relay heater element provides reliable thermal motor protection for A200/B100 starters, supporting accurate overload trip performance.

The Siemens 3TF3000-0A is a 3-pole AC contactor from the 3TF30 series rated 9 A (AC-3 at 380/400 V) with insulation voltage up to 690 V. Designed for motor control applications at 50/60 Hz, it complies with IEC 947 and VDE 0660 standards.

The MTL IOP32D is a DIN-rail mounted surge protection device designed to protect digital and analogue I/O circuits. It provides surge protection for two independent loops (four wires) using a hybrid protection circuit rated up to 20 kA. The device is suitable for industrial control and instrumentation applications and is certified for use in hazardous areas.

Allen-Bradley 700-C1 rear deck contact cartridge delivers reliable switching functionality for Bulletin 700 relay systems, supporting consistent electrical contact operation in control circuit configurations.

Littelfuse LPSC-ID is a 600 V AC/DC, 30 A Class CC fuse holder for branch circuit protection, combining dead front touch-safe construction, DIN-rail mounting, and blown-fuse indication above 80 V.

The Fluke CV300 is a 75 mm ClirVu® infrared window with a hand turn door latch, designed to improve electrical inspection safety. It enables thermal inspections without opening energized panels and supports fast single-hole installation while maintaining enclosure ratings.

The Mitsubishi CP30-BA 1-Pole 10A M-Curve Circuit Protector is a compact supplementary circuit breaker designed for protection of low-capacity control circuits, motors, and transformers. It supports AC 250 V and DC 65 V operation and mounts on a standard 35 mm DIN rail using screw terminals.

The Mitsubishi CP30-BA 1-Pole 3A M-Curve Circuit Protector is a compact hydraulic-magnetic supplementary protector designed for low-capacity control circuits. It supports AC 250 V and DC 65 V operation, offers 2.5 kA breaking capacity, and mounts on standard DIN rail using screw terminals.

The Allen-Bradley 2198-K57CK-D15M is a universal feedback connector kit for Kinetix 5700 drives. It provides wire terminations for encoder signals when using Allen-Bradley 2090-Series motor feedback cables and connects to the drive’s universal feedback (UFB) port.

The Eaton Bussmann DFJ-30 is a 30A Class J high speed, current-limiting drive fuse designed to protect AC and DC drives and power semiconductor devices. Rated up to 600 Vac and 450 Vdc, it provides very low I²t let-through energy and high interrupting capacity for demanding industrial applications.

Littelfuse LPSC-ID is a Class CC fuse holder rated 600V AC/DC and 30A, built for panel protection with blown fuse indication, line/load labeling, and DIN rail mounting.