Search results for: 'models model'

The Siemens 75D73070C AC coil set of 2 offers clearly labeled 50/60 Hz voltage ranges and V/W terminal markings for starter and contactor replacement needs.

Moore Industries DPS/24DC/240MA/117AC/-FA(DIN) is a compact DIN rail power supply delivering 24 VDC at 240 mA from 117 VAC input, with adjustable voltage, current limit control, and output status indication.

Square D 2510KG1 manual switch delivers reliable 30A control for single-phase systems with a 2-pole toggle design and non-reversing operation in a compact NEMA 1 enclosure.

Hammond Power PH50MBMH industrial control transformer delivers 50 VA power conversion with multi-voltage primary and secondary configurations, supporting stable control circuit operation in machine tool and automation environments.

Appleton 4100ST is a 1 in insulated straight EMT set screw connector for grounding and securing EMT raceways to boxes and enclosures. Steel construction with zinc-plated finish, male NPS threads, and 90 °C insulated throat.

Moore Industries RBX/3W80-160/4-20MA/12-42DC-EZ100[HP] resistance bulb transmitter with 3-wire RTD input, 4-20mA output, 12-42VDC loop power, and front Zero/Span adjustment.

The Siemens 3TX4422-0A SIRIUS auxiliary contact block features 2NO + 2NC instantaneous contacts with screw-type terminals. Designed for use with contactor relays and power contactors according to EN 50011, it supports snap-on mounting, IP20 front protection, and positively driven operation per IEC 60947-5-1.

The General Electric CR104PLT43 is a 30.5mm push-to-test indicator light designed for 240V AC industrial automation systems. Part of the GE CR104P series, it utilizes a resistor power supply and supports machine-tool and control panel applications where manual lamp verification is required.

The Siemens TA2J6500 is an aluminum body 2-barrel lug accessory for use with 2- or 3-pole 200A–400A JD and LD frame molded case circuit breakers. It supports copper conductors from 3/0 AWG to 500 kcmil and aluminum conductors from 4/0 AWG to 500 kcmil, and is suitable for both line and load side connections.

The AEG SH 05.31 is a 4-pole auxiliary contactor from the SH 05 series with a 24V DC coil. It features a 3NO + 1NC contact configuration (31E) and screw terminals. Rated per AC-15 and DC-13 utilization categories as specified in the AEG 2014 extract catalogue.

The Universal 447-LR-TC-P is a 120V magnetic fluorescent ballast designed to operate two lamps in trigger-start configurations. It supports F20T12, F15T8, and F15T12 lamps and features a low power factor, lag-type circuit. UL and CSA certifications support indoor and Type 1 outdoor use.

The Omron MY4Z DC24(S) is a general-purpose miniature power relay with a 4PDT contact configuration and 24 VDC coil. Rated for 5 A switching in four-pole applications, it is designed for sequence control and power switching in industrial control systems.

The Allen-Bradley 1492-SP1C250 is a single-pole, 25 A supplementary circuit breaker with a Type C tripping characteristic. Designed for DIN rail mounting, it provides thermal-magnetic overcurrent protection for commercial and light industrial control circuits operating with inductive loads.

Mersen A050F300 Protistor semiconductor fuse delivers ultra-fast aR protection at 500V and 300A, designed to limit let-through energy and protect sensitive power electronics in high-performance drive and converter systems.

The Phoenix Contact 560-3889 is a power distribution interface module used within Emerson Ovation distributed control systems. It functions as a marshalling and power distribution interface between controllers and I/O field devices, supporting structured wiring through screw terminal connections in PLC and DCS panels.

The Emerson Fisher-Rosemount KJ4001X1-CA1 is an I/O terminal block used as an interface between field wiring and control system I/O modules. The unit provides 16 numbered terminal positions and is designed for industrial automation installations, including hazardous location environments as indicated on the device label.

The Siemens Sentron ED43B020 is a 3-pole, 20 amp molded case circuit breaker rated for 480 VAC operation. It provides thermal-magnetic protection with long-time and instantaneous trip functions and is designed for use in commercial and industrial power distribution systems.

The Allen-Bradley 800T-XA2 Series D is a 30 mm industrial control contact block featuring two normally open contacts and an A600 NEMA pilot duty rating. Designed for use with Bulletin 800T operators, it provides screw-terminal connections and base-mount installation for industrial control panels.

Allen-Bradley 1489-M-C16A is a 3-pole 16A miniature circuit breaker with C-curve tripping for branch circuit protection in industrial control panels, supporting DIN rail mounting and UL 489 compliance.

United Conveyor Supply Co 34592-1 NEMA 4 Junction Box offers durable, weatherproof protection for industrial wiring and controls in harsh indoor or outdoor environments.

SCHMERSAL SRB301LCI-24V: Reliable 24V safety controller relay with 3 safety contacts, signaling output, and advanced diagnostics for industrial protection.

Eaton XTCEXFAC20 auxiliary contactor supports control-panel auxiliary switching with two normally open contacts and visible AC/DC ratings.

Allen-Bradley 855T-B24DN3 delivers crisp green visual signaling in a 70 mm Control Tower stack light format with 24V AC/DC steady incandescent operation.