Search results for: 'provides'

Eaton PKZM0-25/NHI11 motor-protective circuit breaker delivers adjustable 20–25 A thermomagnetic motor protection with phase-failure sensitivity for motor control and panel protection applications.

Eaton Cutler-Hammer SL7-BL120-R delivers high-visibility red LED signaling in a 70 mm stacklight format, operating on 120VAC for industrial status indication and machine signaling applications.

Hubbell HBL7593 twist-lock connector delivers secure 15A 125V power connectivity with NEMA ML-2R configuration for reliable 2-pole 3-wire grounding applications.

The Tristar S0803-0000 is a compact 12V DC white LED indicator designed for 1/2" hole mounting. This polarity-sensitive LED draws approximately 0.02–0.03 amps and consumes about 0.25 watts. The unit features a 1/2" diameter body with a 1.75" housing length and is suitable for low-draw DC indicator applications.

The Leviton 2453 is a 20 Amp, 277/480 Volt AC locking connector with a NEMA L19-20R configuration. It features a 4-pole, 4-wire, non-grounding design for 3-phase WYE applications. The connector uses an impact-modified nylon body with solid brass blades and contacts.

Allen-Bradley SP-135775 bus capacitor kit designed for 1336 series AC drives. Restores DC bus voltage stability and ride-through performance in compatible 15–50 HP drive configurations.

AEMC 2135.43 Inverter: Power your ground testers and meters on the go with this 12VDC to 120VAC inverter, ideal for vehicle use and field testing.

The Schneider Electric GTK0610 equipment grounding kit is a field-installable grounding kit for Square D F-Series heavy-duty safety switches. It supports copper or aluminum grounding conductors and is designed for switch applications up to 600 V.

The Allen-Bradley 800B-N5W is a white LED lamp designed for use with Bulletin 800B 16 mm illuminated push-button and pilot light operators. Rated for 120V AC operation, this LED bulb provides consistent white illumination with low power consumption and extended service life in industrial control panel applications.

General Electric THQL32070 70A 3-Pole Breaker: Reliable thermal-magnetic protection with plug-in design, HACR rating, and quick-make, quick-break mechanism.

Eaton Cutler-Hammer PC-GF20 switch protector guard helps shield 30.5 mm pushbutton and emergency-stop operators with reinforced PC-GF20 construction and metal washer support.

REES 50702-000 delivers heavy-duty SPST-NC contact control for REES push button operators and selector switches, with screw terminals and gold-plated contacts for dependable circuit switching.

Eaton E30AD pushbutton operator delivers maintained and release control in a compact two-button configuration for industrial control panels and multifunction applications.

Hubbell 0740-113-36 Deluxe Cord Grip enables secure liquidtight cable entry for .500"–.625" insulated cables with corrosion-resistant stainless steel mesh and oil-resistant sealing.

Hubbell HBL2431 delivers a compact locking plug format for 20A, 3-phase 480VAC connections with 3-pole, 4-wire grounding configuration.

Orbit OF7716 2 in steel EMT set-screw coupling connects two EMT thinwall conduit ends to extend raceways in dry locations with zinc electro-plated steel construction.

Eaton DILEM-10 mini contactor delivers 8.80A switching, three-pole FVNR control, 1NO contact configuration, and 110–120 Vac coil operation in a compact IEC frame.

Turck MK91-12-R/115VAC is a 1-channel level controller for electrode-based level monitoring with 115VAC supply, relay output switching, and adjustable operating settings for control tasks.

B-Line B2010 conduit hanger strut clamp secures 1-inch conduit to standard strut systems with a durable two-piece steel design. Supports reliable pipe mounting with secure fastening and corrosion-resistant zinc finish.

GF Signet 3-8512 flow transmitter converts compatible sensor frequency input to a 4-20 mA process signal for flow monitoring and control. Local display and keypad are built into the unit.

The Mitsubishi CP30-BA 1-Pole 10A M-Curve Circuit Protector is a compact supplementary circuit breaker designed for protection of low-capacity control circuits, motors, and transformers. It supports AC 250 V and DC 65 V operation and mounts on a standard 35 mm DIN rail using screw terminals.

The Mitsubishi CP30-BA 1-Pole 3A M-Curve Circuit Protector is a compact hydraulic-magnetic supplementary protector designed for low-capacity control circuits. It supports AC 250 V and DC 65 V operation, offers 2.5 kA breaking capacity, and mounts on standard DIN rail using screw terminals.

ZORO Select model 6UEE7 is an electric sequencer designed for HVAC and refrigeration systems. It operates on 24V AC control voltage and features two switches with adjustable on and off timing. Rated for up to 25A resistive load, it supports horizontal or vertical installation.

Cornell Dubilier 677-9344 CGS342T350X5L is a CGS-series aluminum electrolytic capacitor rated at 3400µF and 350VDC. It features screw terminals, chassis mounting, and is designed for high current filtering or energy storage applications.