Search results for: 'control'

Square D 9001SKP1C9 delivers 30 mm pilot light signaling with a red domed plastic lens, incandescent BA 9s lamp, 110–120 V AC supply, and screw clamp terminals.

The NOARK Ex9S32A32A is a 3-pole thermal-magnetic manual motor starter with an adjustable 24–32A current setting range and Class 10 overload protection. Designed for motor branch circuit protection, it provides manual isolation, manual motor control, and short-circuit protection with rotary handle operation.

The ABB 1SVR430841R0200 CM-SRS.11 provides TRMS current monitoring with adjustable thresholds and multiple ranges, ideal for single-phase industrial control protection.

Eaton PKZM0-25/NHI11 motor-protective circuit breaker delivers adjustable 20–25 A thermomagnetic motor protection with phase-failure sensitivity for motor control and panel protection applications.

The Allen-Bradley 1492-SP1C250 is a single-pole, 25 A supplementary circuit breaker with a Type C tripping characteristic. Designed for DIN rail mounting, it provides thermal-magnetic overcurrent protection for commercial and light industrial control circuits operating with inductive loads.

The Emerson Fisher-Rosemount KJ4001X1-CA1 is an I/O terminal block used as an interface between field wiring and control system I/O modules. The unit provides 16 numbered terminal positions and is designed for industrial automation installations, including hazardous location environments as indicated on the device label.

Introducing the OWON ODP6062: Elevate Your Power Control.

The C3 Controls DDS2-340-DHGRY is a non-fused, 40 amp, 3-pole disconnect switch designed for door-mount applications. It features a red/yellow rotary operating handle and an IP65 ingress protection rating for use in industrial control environments requiring reliable circuit isolation.

Eaton WMZS1B10 10A B-curve breaker delivers reliable supplementary protection for control panels, electronics, and DIN-rail systems with fast, current-limiting performance.

Phoenix Contact 2832771-HW16 FL Switch SF 8TX delivers reliable 8-port 10/100 Mbps industrial Ethernet expansion with plug-and-play setup and DIN-rail mounting.

Hubbell HC69476733 industrial resistor assembly delivers controlled resistive load handling for power dissipation and current regulation in industrial electrical systems.

Wenglor UF88VCF-P24 photoelectric switch sensor supports non-contact object detection for industrial automation with DC operation, fast switching performance, and flexible sensing capability for demanding machine and control tasks.

The Allen-Bradley 800B-PS11 is a 16 mm snap-action contact block with one normally open and one normally closed contact. Designed for Bulletin 800B push button and selector switch operators, it supports reliable low-voltage switching and compact panel installations in light industrial and instrumentation applications.

The General Electric CR305X100E is a side-mounted auxiliary contact adder block providing one normally closed (1 NC) contact for GE 200- and 300-Line starters and contactors. It is designed for field installation onto a basic auxiliary contact block and is rated up to 600 VAC and 250 VDC.

Allen-Bradley 1492-FB3J60-L fuse holder provides secure Class J fuse mounting for control applications, supporting reliable protection in industrial systems.

Black Box IC107A-R2 RS-232↔RS-422/485 converter for data-only serial communication. Supports 4-wire full-duplex operation for point-to-point or multipoint links. Provides a DB25 female RS-232 interface and a 4-pin terminal block for RS-422/485 with TX/RX/PWR LEDs.

The Allen-Bradley 700-HK32Z24 offers reliable DPDT switching in a slim 24V DC plug-in relay design, ideal for high-density control panels and industrial automation.

Eaton H1116/T1114 thermal overload heaters deliver reliable Class 20 motor protection for Citation Series and Freedom NEMA starters, ensuring safe, accurate trip performance.

The MAC Valves PME-501CC is a solenoid pilot valve labeled 24 VDC and 6.0 watts. The valve body marking indicates a pressure range of 20–150 PSI. The unit includes an attached hardwired cable with flying leads.

Bussmann JP60030-3PR is a 3-pole Class J pyramid fuse block rated 30 A and 600 V for panel-mounted circuit protection using LPJ, DFJ, and JKS fuses in control and power distribution assemblies.

Entrelec Schiele Systron PS 2.423.418.00 24V/1A DIN rail power supply delivers 24V DC at 1A from a wide 90-260V AC input for compact control-panel and automation power conversion.

The TRACO POWER TSP 090-124 is a 90W DIN-rail mounted industrial power supply providing a regulated 24VDC output at up to 3.75A. Designed for factory and control panel environments, it features universal 85–264VAC input, convection cooling, adjustable output voltage, DC-OK signaling, and integrated protection functions.

The Ferraz Shawmut UltraSafe USCC2 P216489 is a 2-pole modular fuse holder rated for 30A and 600 VAC/VDC for Class CC fuses. Designed for DIN rail mounting, it features IP20 finger-safe protection, pressure plate terminals, and a 200 kA SCCR for industrial control panel applications.

Allen-Bradley 1489-M-C15A miniature circuit breaker provides 15A, 1-pole branch circuit protection with a C-curve thermal-magnetic trip, supporting DIN rail mounting for UL and IEC control panels.