Search results for: 'ins it's it'

The WAGO 750-517 is a 2-channel digital output module with potential-free relay contacts for industrial automation systems. It features two changeover relays, supports up to 250 VAC or 300 VDC switching, and mounts on a DIN-35 rail using CAGE CLAMP® connections.

The Emerson Ovation WH5D-2FF / 1X00416H03 power supply module provides regulated 24 VDC output for Ovation distributed control system backbones. The enclosed industrial module supports high-current control applications using wide-range AC or DC input power.

Allen-Bradley 1794-TB32S offers reliable spring-clamp wiring for Flex I/O 32-point modules, delivering quick installation, RIUP support, and secure DIN-rail mounting.

The Functional Devices RIB2401B is a 20 Amp SPDT power control relay with a continuous duty coil and multi-voltage input of 24 Vac/dc or 120 Vac, 50–60 Hz. Housed in a NEMA 1 enclosure accepted for plenum use, it includes a visible LED status indicator and 16-inch 600V rated lead wires. The relay supports general purpose, ballast, pilot duty, tungsten, and motor loads within its published ratings.

The IDEC CS-10 ACSSO contact block is a cam switch component configured with one normally open contact and circuit designation C-2004. It is rated for 600 V insulation voltage and 10 A thermal current, utilizes silver contacts, and is designed for industrial control applications requiring reliable mechanical switching performance.

The Fluke CV300 is a 75 mm ClirVu® infrared window with a hand turn door latch, designed to improve electrical inspection safety. It enables thermal inspections without opening energized panels and supports fast single-hole installation while maintaining enclosure ratings.

The GE DS200VPBLG1AFF is a VME P2 backplane board used in GE LS2100 and Load Commutated Inverter control systems. It provides centralized power and signal distribution across a 13-slot chassis, supporting DSPC, gate distribution, exciter, and I/O extender boards.

The MEAN WELL HRP-600-15 is a single-output enclosed AC-DC power supply delivering 15 VDC at up to 43 A. It features built-in active power factor correction, fan cooling with ON-OFF control, and protection against overload, over-voltage, and over-temperature for industrial power applications.

The Allen-Bradley 2198-K57CK-D15M is a universal feedback connector kit for Kinetix 5700 drives. It provides wire terminations for encoder signals when using Allen-Bradley 2090-Series motor feedback cables and connects to the drive’s universal feedback (UFB) port.

Mersen / Ferraz Shawmut A155F2D0R0-125E is a 15.5 kV, 125E medium-voltage, E-rated Amp-Trap® CS-3 series ferrule-mounted fuse. Designed for transformer and distribution protection, it provides current-limiting performance with visual blown-fuse indication and compatibility with standard spring-reinforced clips.

Allen-Bradley 1492-UF824 fusible terminal block provides compact DIN-rail circuit protection with LED blown-fuse indication for low-voltage AC/DC control and PLC applications.

General Electric 546A301G053 contact kit delivers 4-pole renewal capability for NEMA Size 1 magnetic contactors, supporting reliable electrical continuity and restoration of control equipment performance.

The ABB DSQC 504 Base Connector Unit is a passive I/O interface module used in ABB robot controller systems. It functions as a centralized backplane for connecting axis control modules, power supplies, safety wiring, and external I/O devices within S4, S4C, and S4C+ controller cabinets.

Helwig Carbon H704 high-speed turbine carbon brush is built for turbo generator service, delivering low-friction electrical contact, balanced current distribution, and dependable performance at peripheral speeds up to 180 mph.

Beckwith M-0193 Syncrocloser Unit delivers automatic generator-to-bus synchronization with adjustable voltage and frequency difference limits for controlled breaker closing in power system applications.

The Weidmüller 1122-8800-00 TRZ 24VDC 1CO is a slim DIN rail relay interface module with a 24 V DC control voltage and one changeover (SPDT) contact. It supports up to 6 A switching current and uses tension-clamp connections for secure, screwless wiring in control cabinets.

The Allen-Bradley 1492-SP1C250 is a single-pole, 25 A supplementary circuit breaker with a Type C tripping characteristic. Designed for DIN rail mounting, it provides thermal-magnetic overcurrent protection for commercial and light industrial control circuits operating with inductive loads.

Mersen A050F300 Protistor semiconductor fuse delivers ultra-fast aR protection at 500V and 300A, designed to limit let-through energy and protect sensitive power electronics in high-performance drive and converter systems.

The Eaton WMZS2C50 2-pole 50A Type C breaker offers reliable DIN-rail protection for moderate-inrush industrial loads, delivering resettable thermal-magnetic performance.

Emerson Ovation 1C31189G31 Speed Detector Module for the Ovation DCS. This module monitors rotating equipment speed and converts sensor input into digital data for real-time control, monitoring, and diagnostics.

The Eaton E22HL3X4 is a 22.5 mm non-metallic heavy-duty assembled indicating light designed for panel mounting. It features a green LED operating at 24 VAC/VDC full voltage and uses a non-relampable cluster style construction. Rated for NEMA 3, 3R, 4, 4X, 12, and 13 environments.

The Mitsubishi CP30-BA 1-Pole 7A M-Curve Circuit Protector is a compact hydraulic-magnetic circuit protector designed for supplementary protection of low-capacity industrial control circuits. It supports AC 250 V and DC 65 V operation and uses an M-curve trip characteristic suitable for moderate inrush loads.

The Telemecanique GV2-AE11 is a front-mounted auxiliary contact block with 1 normally open and 1 normally closed contact. Designed for TeSys GV2 and GV3 motor circuit breakers, it provides status signaling and control feedback using screw clamp terminals.