Search results for: 'installed'

Eaton Cutler-Hammer PC-GF20 switch protector guard helps shield 30.5 mm pushbutton and emergency-stop operators with reinforced PC-GF20 construction and metal washer support.

Hubbell 0740-113-36 Deluxe Cord Grip enables secure liquidtight cable entry for .500"–.625" insulated cables with corrosion-resistant stainless steel mesh and oil-resistant sealing.

Light Efficient Design LED-8033E57 delivers 38W LED HID retrofit performance with 5700K daylight output, replacing 175W HID systems for post top and area lighting applications across 120–277V systems.

RP Lighting + Fans REL21 LED Emergency Light delivers reliable dual-head illumination for emergency egress lighting with 120/277V operation, thermoplastic housing, and optical lens coverage for open areas or pathways.

Topaz Lighting LU100/MOG-37 high pressure sodium lamp delivers 100W output with clear ED23.5 construction and mogul base, providing consistent 9,500 lumen illumination and extended 24,000-hour service life for commercial lighting applications.

Siemens Furnas E62 thermal overload heater element delivers thermal overcurrent protection for use with thermal overload relays, magnetic motor starters, and motor control applications.

Square D 9999 LL0 is a lug-lug kit for Type S contactor and starter configurations, supporting NEMA sizes 00, 0, and 1 in Class 9999 Type LL0 applications.

GF Signet 3-8512 flow transmitter converts compatible sensor frequency input to a 4-20 mA process signal for flow monitoring and control. Local display and keypad are built into the unit.

The Mitsubishi CP30-BA 1-Pole 10A M-Curve Circuit Protector is a compact supplementary circuit breaker designed for protection of low-capacity control circuits, motors, and transformers. It supports AC 250 V and DC 65 V operation and mounts on a standard 35 mm DIN rail using screw terminals.

The Mitsubishi CP30-BA 1-Pole 7A M-Curve Circuit Protector is a compact hydraulic-magnetic circuit protector designed for supplementary protection of low-capacity industrial control circuits. It supports AC 250 V and DC 65 V operation and uses an M-curve trip characteristic suitable for moderate inrush loads.

The Telemecanique GV2-AE11 is a front-mounted auxiliary contact block with 1 normally open and 1 normally closed contact. Designed for TeSys GV2 and GV3 motor circuit breakers, it provides status signaling and control feedback using screw clamp terminals.

The Potter & Brumfield KHAU-17D11-24 is a general-purpose industrial plug-in relay with a 24 VDC coil and 4 Form C contact arrangement. Designed for socket mounting, it supports control and power switching applications requiring multiple changeover contacts.

The Advance L-220-F is a magnetic reactor ballast designed to operate two 15W or 20W preheat fluorescent lamps at 120V AC, 60 Hz. It regulates lamp current using an inductive core and requires external starters for lamp ignition in preheat fluorescent systems.

The Allen-Bradley 800B-N5W is a white LED lamp designed for use with Bulletin 800B 16 mm illuminated push-button and pilot light operators. Rated for 120V AC operation, this LED bulb provides consistent white illumination with low power consumption and extended service life in industrial control panel applications.

The Allen-Bradley 800B-EAB is a 16 mm maintained square push button operator designed for light industrial and instrumentation applications. It features corrosion-proof plastic construction and gold-plated snap-action contact compatibility for reliable low-voltage switching when paired with Bulletin 800B contact blocks.

The Siemens 5SJ4210-7HG42 is a 2-pole miniature circuit breaker from the 5SJ4 Series, rated at 10 A and up to 277 V. It provides thermal-magnetic overcurrent protection for branch circuit and feeder applications and is designed for standard 35 mm DIN rail mounting.

The Honeywell HPK2-3 51401583-100 Enhanced Process Network Interface (EPNI) board is a core logic component used within Network Interface Modules in Honeywell TDC 3000 Distributed Control Systems. It supports data communication between control networks in industrial automation environments.

The Emerson Ovation WH5D-2FF / 1X00416H03 power supply module provides regulated 24 VDC output for Ovation distributed control system backbones. The enclosed industrial module supports high-current control applications using wide-range AC or DC input power.

The Fisher R3570CX0022 is a pneumatic valve positioner repair kit intended for maintenance of Fisher 3570 Series pneumatic valve positioners. This kit supports servicing of positioners used in industrial control valve assemblies and is not a complete valve or positioner.

Philips 3186GH242T450APA9 aluminum electrolytic capacitor designed for industrial power electronics, offering 2400µF capacitance, 450VDC rating, and 525V surge handling in screw-terminal form.

Schneider Electric 9001KU7 is a clear silicone rubber push button boot for Harmony 9001K and 9001SK non-illuminated 30 mm push buttons.

The EMI Corp Gimatic 6753 SB2C Sensor Junction Box enables connection of up to two sensors with series or parallel wiring, PNP/NPN signal conversion, dry contact I/O, signal regeneration, and LED status indication for efficient automation integration.

The Siemens 75D73070C AC coil set of 2 offers clearly labeled 50/60 Hz voltage ranges and V/W terminal markings for starter and contactor replacement needs.

Philips 3534B5A0460A110A3 aluminum electrolytic capacitor offers 460–553 MFD capacitance with a 110–125 VAC, 50/60 Hz rating in a cylindrical can format for component replacement and parts matching.