Search results for: 'Mia Meow'

SolaHD SDN 10-24-480 DIN Rail Power Supply delivers 24 VDC output at 10 A from a 380-480 VAC three-phase input, with adjustable 24-28 VDC output, parallel capability, and DIN rail mounting for industrial control systems.

Siemens 5SY4108-7 delivers reliable 8A Type C circuit protection for DIN-rail systems, ideal for control and lighting circuits needing dependable overload and short-circuit performance.

Eaton WMZTBCON miniature circuit breaker connector with E Nr. 64883 marking and visible UL/IEC electrical ratings for circuit protection assemblies.

Eaton DILM9-10 / XTCE009B10T 24V 50/60Hz 3-pole motor contactor with 9A AC-3 rating, 4 kW capacity, 1NO auxiliary contact, and screw terminals for dependable control of pumps, fans, conveyors, and OEM panels.

The Keyence SL-U2 is a switching-type power supply unit designed for industrial safety applications. It provides a regulated 24 VDC output at up to 1.8 A from a universal 100–240 VAC input and is intended for use with Keyence safety light curtain systems.

Eaton DILEM-10 mini contactor delivers 8.80A switching, three-pole FVNR control, 1NO contact configuration, and 110–120 Vac coil operation in a compact IEC frame.

The EMI Corp Gimatic 6753 SB2C Sensor Junction Box enables connection of up to two sensors with series or parallel wiring, PNP/NPN signal conversion, dry contact I/O, signal regeneration, and LED status indication for efficient automation integration.

Siemens A1-108-101-502 operator display control panel for parameter access, status monitoring, and fault diagnostics in compatible SIMOREG DC drive systems.

The Allen-Bradley AK-R2-360P500 Dynamic Brake Resistor is an external medium-duty resistor kit designed for PowerFlex 70 and 700 series drives. It provides 360 ohms of resistance with an 86 watt continuous power rating to dissipate regenerative energy during motor braking.

The Edwards Signaling 48XBRMG120A is a green LED visual signal light designed for indoor and outdoor industrial applications. Operating on 120 VAC, this dual-mode beacon supports steady-on or flashing operation and is housed in a corrosion-resistant NEMA 4X enclosure.

The MEAN WELL HRP-600-15 is a single-output enclosed AC-DC power supply delivering 15 VDC at up to 43 A. It features built-in active power factor correction, fan cooling with ON-OFF control, and protection against overload, over-voltage, and over-temperature for industrial power applications.

Phoenix Contact QUINT-DIODE/12-24DC/2X20/1X40 is a DIN-rail mounted redundancy diode module for 12–24 V DC systems. It decouples parallel power supplies to increase system availability, supporting 2×20 A redundancy or 1×40 A increasing power operation.

The Phoenix Contact RAD-OUT-8D-REL is an 8-channel digital relay output extension module for Radioline wireless systems. It provides floating relay contacts for reliable signal switching and supports DIN rail mounting in industrial automation environments.

Phoenix Contact 2832771-HW16 FL Switch SF 8TX delivers reliable 8-port 10/100 Mbps industrial Ethernet expansion with plug-and-play setup and DIN-rail mounting.

Black Box IC107A-R2 RS-232↔RS-422/485 converter for data-only serial communication. Supports 4-wire full-duplex operation for point-to-point or multipoint links. Provides a DB25 female RS-232 interface and a 4-pin terminal block for RS-422/485 with TX/RX/PWR LEDs.

Amperite 115C60 thermal time delay relay delivers fixed 60-second Delay on Break control with 115V AC/DC input, SPST-NC contacts, and a 3A resistive rating.

Emerson Ovation 1C31189G31 Speed Detector Module for the Ovation DCS. This module monitors rotating equipment speed and converts sensor input into digital data for real-time control, monitoring, and diagnostics.

Allen-Bradley 1492-CB2 H 200 is a 2-pole DIN-rail supplementary circuit breaker designed for industrial control panels, providing reliable thermal-magnetic overcurrent protection with an H-curve trip characteristic.

Allen-Bradley 1492-FB3C30-L is a 3-pole Class CC fuse holder for the 1492 Wiring System, rated 30A and up to 600V AC, featuring an integrated LED indicator for clear fuse status visibility.

Hubbell HBL2731 delivers a durable 30A 480V L16-30P twist-lock connection for industrial 3-phase equipment, ensuring secure, reliable power performance.

AEMC AX503 Triple Output DC Power Supply comes with 30V, 2.5A outputs and 5V blind output, master-slave tracking, and LED display. Ideal for labs and testing.

Allen-Bradley 193-T1AB48 bimetallic overload relay delivers adjustable 3.5-4.8 A motor overload protection with Class 10 tripping, phase-loss sensitivity, and manual or automatic reset for motor starter assemblies.

The TRACO Power TSP 090-124EX is a 90 W DIN-rail mount industrial power supply providing 24 VDC at 3.75 A. It features universal 85–264 VAC input, adjustable 24–28 VDC output, DC-OK signal, remote On/Off control, and ATEX II3G certification for hazardous locations.

The Eaton P1-25/V/SVB is a 25 A, three-pole main switch from the Eaton Moeller® P1 series designed for rear mounting applications. It features a door-coupling rotary drive with a red rotary handle and yellow locking ring, and supports emergency switching off functionality. The switch is rated up to 690 V AC, provides IP65 front protection, and is lockable in the 0 (Off) position for secured isolation.