Search results for: 'ins it's it'

The Allen-Bradley 800B-EAB is a 16 mm maintained square push button operator designed for light industrial and instrumentation applications. It features corrosion-proof plastic construction and gold-plated snap-action contact compatibility for reliable low-voltage switching when paired with Bulletin 800B contact blocks.

Emerson Ovation 1C31189G31 Speed Detector Module for the Ovation DCS. This module monitors rotating equipment speed and converts sensor input into digital data for real-time control, monitoring, and diagnostics.

Emerson Ovation 1C31219G01 Relay Output Electronics Module for interfacing between the Ovation controller and mechanical relays in a relay output assembly.

Eaton DILM12-10 XTCE012B10A XT IEC contactor provides 12A three-pole full-voltage non-reversing control with 110–120 Vac coil, 1 NO contact configuration, and screw terminals.

Black Box IC107A-R2 RS-232↔RS-422/485 converter for data-only serial communication. Supports 4-wire full-duplex operation for point-to-point or multipoint links. Provides a DB25 female RS-232 interface and a 4-pin terminal block for RS-422/485 with TX/RX/PWR LEDs.

The NOARK Ex9S32A32A is a 3-pole thermal-magnetic manual motor starter with an adjustable 24–32A current setting range and Class 10 overload protection. Designed for motor branch circuit protection, it provides manual isolation, manual motor control, and short-circuit protection with rotary handle operation.

The Ferraz Shawmut UltraSafe USCC2 P216489 is a 2-pole modular fuse holder rated for 30A and 600 VAC/VDC for Class CC fuses. Designed for DIN rail mounting, it features IP20 finger-safe protection, pressure plate terminals, and a 200 kA SCCR for industrial control panel applications.

Forney 312 High Energy Spark Igniter delivers Class 3 direct spark ignition for oil or gas igniters and small burners with 12 joules per spark, 2000 VDC output, and approximately 3 sparks per second.

Siemens 3RP1505-1BQ30 SIRIUS timing relay with multi-function operation, 2 changeover contacts, 15 time setting ranges, LED indication, and screw-type terminals.

The Allen-Bradley 800B-PS11 is a 16 mm snap-action contact block with one normally open and one normally closed contact. Designed for Bulletin 800B push button and selector switch operators, it supports reliable low-voltage switching and compact panel installations in light industrial and instrumentation applications.

Square D 8501RSD14V51 miniature relay with 12 VDC coil, 4PDT contact composition, socket mounting, spade pins, and 5 A rating. Product range 8501R.

General Electric B4A82S1F1V1 Type SBM Switch delivers compact rotary cam control for industrial panels, combining panel-mounted operation, double-break contacts, and 600 VAC/VDC, 20 A continuous switching capability.

Moore Industries DPS/24DC/240MA/117AC/-FA(DIN) is a compact DIN rail power supply delivering 24 VDC at 240 mA from 117 VAC input, with adjustable voltage, current limit control, and output status indication.

The General Electric DS200DDTBG2ABB is an LCI Auxiliary I/O Terminal Board for GE Mark V Speedtronic gas and steam turbine control systems. It provides auxiliary signal termination, conditioning, and isolation for analog and digital I/O in high-voltage industrial control environments.

The LEMO FGL.5K.314.CYMC20 is a 5K-Series circular push-pull connector with 14 low-voltage crimp contacts and IP68 environmental sealing. Designed for harsh environments, it supports up to 18 A per contact, reverse-gender configuration, and secure push-pull locking.

Allen-Bradley 1492-CB1-H100 is a 10A single-pole thermal-magnetic supplementary circuit breaker for control circuits, featuring H-trip protection for highly inductive loads and DIN rail mounting.

The Ferraz Shawmut USCC3I is a 3-pole ULTRASAFE modular Class CC fuse holder rated for 600 VAC and 30 A. It accepts Class CC fuses only, incorporates integrated blown-fuse indicators, and mounts on standard 35 mm DIN rail for industrial electrical panels.

The Phoenix Contact RAD-OUT-4A-I is a compact analog extension module providing four independent 4–20 mA current outputs. Designed for DIN rail mounting, it operates from a 9–30 V DC supply via a bus foot connector and supports screw terminal wiring. The module is UL listed for Class I, Division 2 hazardous locations and CE compliant.

Entrelec Schiele Systron PS 2.423.418.00 24V/1A DIN rail power supply delivers 24V DC at 1A from a wide 90-260V AC input for compact control-panel and automation power conversion.

Siemens 3RT2035-3AK60 SIRIUS power contactor rated 41 A (AC-3) at 400 V with 18.5 kW operating power. Three-pole design with integrated 1 NO + 1 NC auxiliary contacts and 110 V AC (50 Hz) / 120 V AC (60 Hz) control coil. Size S2 frame with screw-type main terminals and spring-loaded auxiliary/control terminals.

Johnson Controls Metasys ORL101 Output Relay Module: Reliable control for field devices. Features magnetic latching relay, HOA switch, and durable 120VAC performance.

Vishay 36MB100A single phase bridge rectifier supports 35 A average current and 1000 V VRRM in a compact D-34 package for general purpose and instrumentation power conversion.

Hubbell CS320I is a commercial-specification 3-way toggle switch rated 20A at 120/277V AC. It is side wired only, supports #14 to #10 AWG copper wire, and features an ivory nylon toggle with thermoplastic construction.

The Mitsubishi SR-T5 AC100V 3A2B contactor relay is designed for control circuits requiring reliable auxiliary switching. It operates on a 100–127 VAC coil and provides 3 normally open and 2 normally closed contacts. The compact design supports DIN rail or screw mounting.